NUX NDS-5 Fireman Dual Channel Distortion Pedal Owner’s Manual
- June 9, 2024
- NUX
Table of Contents
Verdugo Series
NDS-5
Owner’s Manual
NDS-5 Fireman Dual Channel Distortion Pedal
Copyright
Copyright 2020 Cherub Technology Co. All rights reserved NUX and Fireman
Distortion are trademarks of Cherub Technology Co. Other product names modeled
in this product are trademarks of their respective companies that do not
endorse and are not associated or affiliated with Cherub Technology Co.
Accuracy
Whilst every effort has been made to ensure the accuracy and content of this
manual, Cherub Technology Co. makes no representations or warranties regarding
the contents.
WARNING!-IMPORTANT SAFETY INSTRUCTIONS BEFORE CONNECTING, READ
INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove
screws. No user-serviceable parts inside. Refer servicing to qualified service
personnel.
CAUTION: This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The lightning symbol within a triangle means “electrical caution!” It
indicates the presence of information about operating voltage and potential
risks of electrical shock.
The exclamation point within a triangle means “caution!” Please read the
information next to all caution signs.
- Use only the supplied power supply or power cord. If you are not sure of the type of power available, consult your dealer.
- Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat.
- Guard against objects or liquids entering the enclosure.
- Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
- Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- The power supply cord should be unplugged when the unit is to be unused for long periods of time.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the point where they exit from the apparatus.
- Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening”.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!
Overview
FIREMAN is based on the legendary amplifier builder’s famous distortion pedal. It’s a very amp-like distortion pedal with Modern Brown Sound. We designed it with 2 independent VOLUME, GAIN control knobs to fit rhythm and solo applications. FIREMAN offers a True-bypass / Buffer-bypass toggle switch, and a 9V / 18V toggle switch. The 18V position doubles the working voltage inside to give you wider dynamic range.
Features
- Modern Brown Sound in a box.
- True-bypass / Buffer-bypass toggle switch.
- 18V / 9V toggle switch to get different dynamic range.
- 2 independent GAIN, VOLUME knobs for rhythm / solo application.
- 9V Negative Tip Power Adapter Input .
Control Panel
| 1/2 Foot-switch | ON Foot-switch |
|---|---|
| Chooses the current Channel for 1 or 2. | Engages or disengages the distortion |
sound.
VOLUME1 knob
VOLUME1| BASS knob BAS
---|---
Adjusts the output level while in Channell.| Adjusts the low-end response of
distortion sound.
GAIN1 knob
GAIN1| TREBLE knob TREBLE
Adjusts the distortion situation of the sound while in Channell| Adjusts the
high-end response of distortion sound.
VOLUME2 knob VOLUME2| PRESENCE knob PRESENC
Adjusts the output level while in Channell.| Adjusts the ultra-high-end
frequency of distortion sound.
GAIN2 knob GAIN2| TIGHT knob TIGHT
Adjusts the distortion range of the sound while in Channel2.| Shapes the low
frequency content (Turn it up to tighten the sound.)
I/O Jacks
INPUT jack INPUT| OUTPUT jack
OUTPUT
---|---
Connects with your guitar or the signal from guitar side.| Connects with the
amplifier or to the amp side.
BF/TB Toggle Switch| EXT. SW jack EXT. SW
BF means Buffer-bypass, TB means True-bypass.| Connects with TRS dual foot-
switches to replace the 2 foot-switches function on the pedal.
18V / 9V Toggle Switch| DC jack
The pedal uses 9V power, you can choose 18V position to double the working voltage inside to get wider dynamic range.| Connects with 9V Negative Tip power with 100mA adaptor.
Connection Methods
Specifications
-Frequency Response: 2014z-20kHz – ±-1 dB -Input
Impedance: 2.2MQ -Output
Impedance: 11(52 -Power Supply: 9V DC, Negative Tip (ACD-006A)
-Dimensions: 105mm(L) x 115mm(W) x 57mm(H)
-Weight: 460g
Accessories: User manual, Warranty card
*Specifications and features are subject to change without notice.
www.nuxefx.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>