xcite LED LIGHTING XCPSK67WW PRO 12V LED Strip Light Kit Instruction Manual

: June 9, 2024
: xcite LED LIGHTING

Table of Contents

xcite LED LIGHTING XCPSK67WW PRO 12V LED Strip Light Kit
General information
Dimensions
INSTALLATION & OPERATING INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

xcite LED LIGHTING XCPSK67WW PRO 12V LED Strip Light Kit

xcite LED LIGHTING XCPSK67WW PRO 12V LED Strip Light
Kit

General information

This luminaire must be installed in accordance with the latest edition of the |ET Wiring Regulations and local Building Regulation by a qualified competent person.
The mains power supply must be turned off before inspection, installation or removal of the luminaire, ensuring that the supply is locked off to prevent inadvertently switching the supply on.
It is the installer’s responsibility to ensure that the installation is sutable for the total load of the luminaire(s). The supply cable fuses/circuit breakers must be correctly rated for the electrical load and taking into account for any transient inrush currents that may occur.
It is the installer’s responsibility to ensure that the environmental operating and storage conditions are complied with and that any fire risks are considered
Do not perform insulation strength or insulation resistance tests on the installation with the luminaire(s) connected, this can damage the luminaires and give erroneous readings.
Do not loop-in supply cables at the luminaire supply terminals unless there is provision for 2-way connection at the terminals.
The light source contained in this luminaire must only be replaced by Tamlite Lighting or an appointed service agent.
Emergency lighting luminaires must be installed and maintained in accordance with the emergency lighting standard BS 5266-1.
To ensure that the product warranty remains valid, the luminaire must be installed and maintained in accordance with these installation instructions and the product must not be modified in any way.