Tenda 4G03 N300 Wifi 4G LTE Router Installation Guide
- June 9, 2024
- Tenda
Table of Contents
Tenda 4G03 N300 Wifi 4G LTE Router
Set up the router
- Insert a SIM card into the slot on the bottom panel of the router.
- Use the included power adapter to connect the PWRjack of the router to a power source.
- Press the ON/OFF button down to tum on the router. The LED indicator lights, up.
Wait a few seconds. The router is connected to the internet when the LED Indicator lights up.
Type: If the LED indicator does not light up, 11:1fer to Q1 in FAQ.
Access the internet
- Connect your wired device, such as a computer, to the WAN/LAN or LAN port of the router using an Ethernet cable.
- Connect your wireless device, such as a smartphone, to the Wi-Fi network of the router using the Wi-R Name and WI-Fi Key labeled on the bottom panel of the router.
To further configure the router, log in to the web UI of the router by visiting tendewlfl.com on a connected device.
LED indicators
Ports& Buttons
FAQ
Q1: The LED indicator does not light up. What should I do?
A1: Start a web browser and access tendawifi.com
- If you are required to enter a PIN code to unlock the SIM card, contact your ISP for the PlN COde.
- If you are required to enter APN parameters manually, enter these parameters provided by your ISP
- If the LED indicator is still off after you finish the Quick Setup Wizard, your SIM card may run out of money. If the problem persists, contact your ISP for help.
Q2: cannot access the internet after the configuration. What should do?
A2: Ensure that the LED indicator lights are solid on. If not, refer to Q1. If
the problem persists, try the following methods:
- For wired devices, such as computers:
- Ensure that your computer is connected to port WAN/LAN or LAN properly.
- Ensure that your computer is set to obtain an IP address automatically and Obtain a DNS server address automatically.
- For wireless devices, Such as smartphones:
- Ensure that your wireless device connects to the Wi-Fi network of the router with the Wi-Fi name you set.
- Log in to the web Ul and change your Wi-Fi name and Wi-Fi password on W-Fi Settings > W-FI Name & Password page. Then try again.
Q3:Icannot access the web Ul of the router by visiting tendawifi.com. What
should I do?
A3: Try the following souo you log in with a wireless device Ensure that your
wireless device has connected to the Wi-Fi network of the Disable the cellular
network of your wireless device. Clear the cache of your web browser or change
to another web browser and try your login with a wired device: Ensure that the
computer has connected to the router properly. Ensure that the lP address of
your computer is 192.168.0.X (X ranges from 2 to 254).r not, unplug and replug
one end or the Ethernet cable between the router ne computer, and try again.
ear the acne or your web Browser or Change another weD Drowser and try again.
F the problem persists, reset the router (hold down the RST/WPS button for
about 8 seconds) and configure it again.
Q4: Why cannot I find the Wi-Fi signal of the router?
A4: Connect your computer to port WAN/LAN or LAN of the router to log in to
the web UL Navigate to Wi-Fi Settings > Wi-FI Name & Password: Ensure that the
wire ess Function is enabled. f not enabled it and save the setting9 Search
for the Wi-Fi signal again on your phone. Ensure that the Hide function iS
disabled. It not, disable it and save the setting Search for the i-tl Signal
again on your phone.
Q5: How to change my Wi-Fi name and password?
A5: Log in to the web Ulof the router on your wired or wireless device,
navigate to Wi-FI Settings > Wi-Fi Name & Password, and customize your Wi-Fi
name and password.
Q6:I cannot access the internet with a SIM card under the wireless router
mode.
A6: Ine dooouternoae and the ireessrouter mode are Wo aierentopeaing an only
use the SIM card to access the internet under ue oo routter mo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>