AGFAPHOTO ARL11XL Ring Light and Adjustable Tripod User Manual

: June 9, 2024
: AGFAPHOTO

Table of Contents

SPECIFICATIONS
STRUCTURE
LIGHT CONTROLLER
INSTALLATION
MOBILE PHONE AND SMALL CAMERA HOLDER
BLUETOOTH REMOTE SHUTTER
CONNECTING TO A POWER SUPPLY
NOTICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ring Light + Adjustable Tripod
Realiview ARL11XL User manual

SPECIFICATIONS

www.support.agfaphoto-gtc.com

• Light Type: LED SMD
• Diameter: 11-inch
• Power: 12W| • Color Temperature: 3200-6500K
• Voltage: DC5V
• Number of LEDs: 120
---|---

STRUCTURE

AGFAPHOTO ARL11XL Ring Light and Adjustable Tripod - fig
1

A Diffuser
B Logo
C Tripod interface| D Hanging Hook
E Ventilation
F Hot Shoe adapter| G Pitching lock knob
H 1/4’’ camera screw
I Horizontal locking knob
---|---|---

LIGHT CONTROLLER

AGFAPHOTO ARL11XL Ring Light and Adjustable Tripod - fig
2 When the ring light is switched on, press the “+” button to increase the brightness by 10%,
Press the “exchange” button to switch between warm, natural and day light.
Press the “-“ button to decrease the brightness by 10%.
When the USB cord is connected to a power supply, press the power button to switch on or off the ring light.

INSTALLATION

To deploy the feet of the tripod, loosen the locking knob near the bottom, open the feet of the tripod and tighten the locking knob to secure the position.
Attaching the 11” ring light to the tripod
Rotate the ring light’s base onto the tripod’s stud until secure.
Adjusting the tripod’s height AGFAPHOTO ARL11XL Ring Light and Adjustable
Tripod - fig 3 You can increase or decrease the height of the tripod at four different points, each point has a flip lock you can open and close.
To adjust the length of one of the expendable parts, open the corresponding flip lock, adjust the length and close the flip lock. Adjusting the ring light’s angle
You can rotate the ring light horizontally and vertically.
To rotate it horizontally, rotate the wheel placed at the tip of the tripod to the left or to the right. To rotate it vertically, loosen the angle tilt knobposition to the desired angle and retighten the knob.

MOBILE PHONE AND SMALL CAMERA HOLDER

The mobile phone holder is mounted to the ring light by default.
You can swap it for the included compact camera holder.

Compact Camera Holder Mobile Phone Holder

To do so, simply remove the mobile holder by rotating its base counterclockwise, then mount the camera holder by rotating it clockwise onto the ring light.

BLUETOOTH REMOTE SHUTTER

Pairing the remote shutter to your phone

Make sure Bluetooth is enabled on your phone.
Turn the remote shutter on.
In the Bluetooth settings of your phone, find “AGFAPHOTO” and pair with it.

Using the Remote shutter

On your phone, open the camera app.
Press the remote shutter button to take a picture or a video.

Deleting and re-pairing the remote shutter

Turn the remote shutter off.
Go to your phone’s Bluetooth settings and find “AGFAPHOTO”.
Select it and click “forget device”.

CONNECTING TO A POWER SUPPLY

The device must be used with a DC 5V power supply.
Warning: Please make sure the voltage connected is correct and stable, if you use anything higher or lower than DC 5V, the ring light may not work as intended, stop working or even get damaged.

NOTICE

Please do not continuously operate over six hours. Keep the device away from children under 12 years of age.
Do not stare at the strong light for a long time. Don’t let the product get exposed to rain or moisture.
Before cleaning the device, make sure the device is turned off.
Use a dry or slightly damp rag for cleaning, any kind of chemicals or corrosives must not be used.
1 year limited warranty
Made in China
Notice of compliance for the European Union : products bearing the CE mark comply with the applicable European directives and associated harmonised European standards.
Disposal of waste equipment by users in the European Union : this symbol means that according to local laws and regulations, it is prohibited to dispose of this product with household waste. Instead, it is your responsibility to protect the environment and human health by handing over your used device to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
After sales service
@ : aftersales@agfaphoto-gtc.com – Tél. : + 33 (0) 1.85.49.10.26

Product manufactured for and distributed by :
GT COMPANY – 5 rue de la Galmy –
GT COMPANY UK LTD –
77700 Chessy – France –
+33 (0) 1.61.10.09.25 – www.gtcompany.fr
11 Old Jewry – EC2R 8DU
LONDON – UNITED KINGDOM
AgfaPhoto is used under license of Agfa-Gevaert NV. For this product a sublicense has been granted by AgfaPhoto Holding GmbH (www.agfaphoto.com). Neither Agfa-Gevaert NV nor AgfaPhoto Holding GmbH manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer.

www.agfaphoto-gtc.com