SCREWFIX 1000W Terma Rolo Wall-Mounted Smart Designer Radiator Instruction Manual

SCREWFIX 1000W Terma Rolo Wall-Mounted Smart Designer Radiator

PRODUCT INFORMATION

• MATERIALS:
  • the radiator is made of aluminium alloy, its surface is powder coated.
• TECHNICAL PARAMETERS:
  • detailed product data can be found on the last page of this booklet
• INTENDED USE :
  • heating the interiors with normal air humidity and without any corrosive factors (this also applies to bathrooms, kitchens etc.).
• RADIATOR INSTALLATION ZONES:
  • Zone „X“ stands for a water source (meaning any sink, shower, bathtub or toilet). Zone „A“ includes the space directly above zone „X“ as well as 1 m to the left and 1 m to the right. The aluminium radiator must not to be installed in zone „A“. Zone „B“ is safe for installation of aluminium radiator.
• WATER QUALITY:
  • the radiator is intended for use in sealed central heating systems.
• THE RADIATOR FULLY COMPLIES WITH THE FOLLOWING REGULATIONS:
  • Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 regulating the conditions for the marketing of construction products, and harmonised standards

GENERAL INSTALLATION

• Special caution must be taken while transporting, installing or dismantling the radiator in order to avoid any harm or damages.
  The place designated for the installation of the radiator should be equipped with central heating installation pipe endings matching the radiator connection spacing specified in the technical specifications section. Additional information can be obtained from our Trading Partners.

• We recommend the use of valves on the supply and the return of the radiator.

SAFETY PRECAUTIONS

• Do not put loads exceeding 5 kg on the radiator.
• Any changes in the construction of the radiator and/or warranty repairs can only be conducted by the Manufacturer.
• Observe the operating parameters specified in the PRODUCT INFORMATION section. This applies in particular to:
  • the operating pressure, because excessive pressure can destroy the radiator and bring about other damages,
  • the quality of the heating medium (wrong pH value or oxygen saturation can cause radiator corrosion); connecting the radiator to the domestic hot water system or refilling the installation with liquids having unsuitable chemical properties can also bring about radiator damage.
• Do not dry any clothing or fabrics on the radiator

FAILURE SITUATIONS

In case of any signs of a radiator fault, such as:

• a leak of the heating medium,
• any other abnormal symptoms, immediately turn off the valves and contact the Manufacturer.

MAINTENANCE

• Do not allow the temperature of the heating medium to fall below 0°C.
• We recommend keeping the radiator clean. The radiator can be cleaned with domestic cleaning products except for those containing solvents or abrasives.
• Applying any additional layers of paint or lacquer to the radiator is not allowed

WARRANTY CONDITIONS

• This warranty applies to the aluminium radiator with parameters specified on the last page of this booklet.
• By accepting the product the Consumer confirms that the product is of full value, free from any defects.
• In case of any defects the Consumer should inform the Seller.
• Otherwise it is assumed that the Seller provided the Consumer with a product without any defects (in particular paint coating faults).  The warranty periods are:
  • 10 years for water tightness,
  • 3 years for powder coat layer.
• The product serial label placed on the back of the radiator and evidence of purchase are prerequisites for any claims resulting from the warranty.
• The Manufacturer may reject the claim if any of the above has not been supplied.
• The warranty does not cover:
  • product faults resulting from incorrect (not in compliance with the manual) installation or use;
  • product faults resulting from using the radiator in defiance of the requirements specified in the attached manual — in particular those regarding water characteristics and pressure inside the radiator;
  • damage caused by the Consumer after receiving the product from the Seller.
• The warranty does not apply to any claims related to technical and functional features of the radiator, as long as they conform with those stated in the manual and technical specifications. The warranty service does not include any activities described in the user manual, and customarily performed and paid for by the Consumer.
• It is recommended to install valves on the supply and return pipes making it possible to disconnect the radiator from the central heating installation. If valves are not fitted the Consumer covers the extra cost of radiator dismantling.
• Every claim is processed within 14 days of its receipt.
• If the claim is accepted, the Manufacturer will repair the faulty product. The time required for the repair will be agreed with each Consumer individually. If the product cannot be repaired the Manufacturer will replace it with a new one.
• The guarantee covers the radiator segments (sections and joints), in the configuration made by the manufacturer.
• The accompanying user manual is an integral part of the warranty documentation. Please read it carefully before using the product

DISPOSAL

When permanently dismantling and removing the radiator observe your local lawconcerning disposal

References

• Home page | TERMAHEAT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>