nVent 633400 Erico Copper Bonded Ground Rod Owner’s Manual
- June 9, 2024
- nVent
Table of Contents
nVent 633400 Erico Copper Bonded Ground Rod
CATALOG NUMBER
633400
CERTIFICATIONS
FEATURES
Cold-rolled threads with continuous, unbroken grain flows preserve copper
coating and are stronger than cut threads 99.9% pure electrolytic copper
coating
Rods have a high carbon steel core and tip that provide superior strength when
driving
Copper coating will not crack when bent or tear when driven
Minimum copper coating of 10 mils on rods listed to UL® 467 nVent ERICO name,
length, diameter and part number is roll-stamped within 12″ (304,8 mm) of
chamfered end
UL logo and control number where applicable stamped on each rod for easy
inspection after installation
PRODUCT ATTRIBUTES
- Material: Copper-Bonded Steel
- Tensile Strength: 80,000 psi Min
- Thread Location: Pointed and Chamfered Ends
- Ground Rod Diameter, Nominal: 3/4″
- Ground Rod Diameter, Actual: 0.680″
- Thread Size: 3/4″ UNC
- Length: 10′
- Plating Thickness: 10 mil
- Unit Weight: 12.500 lb
- Complies With: ANSI®/NEMA® GR1;IEC® EN 62561-2
ADDITIONAL PRODUCT DETAILS
For rods to be listed to UL® 467, they must be at least 8′ (2.44 m) in length.
IEC® EN 62561-2 supercedes EN 50164-2.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer
service representative. Improper installation, misuse, misapplication or other
failure to completely follow nVent’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or
void your warranty.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice