nVent TSR122038RL Caddy Rod Lock Telescoping Strut Replacement Instruction Manual
- June 9, 2024
- nVent
Table of Contents
nVent TSR122038RL Caddy Rod Lock Telescoping Strut Replacement
FEATURES
- Easy “push-to-install” design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Allows installers to prefabricate complex assemblies and quickly lift and lock them into place
- Lock nut can be finger tightened, locking the rod in place
- Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
- Captive threaded nuts enable fastening to threaded rod supports without loose parts
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2″ (50 DN) conduits, six 2″ (50 DN) water filled pipes at 10′ (3 m) spacing, or up to 18” (450 mm) cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Pregalvanized
- Rod Size: 3/8″
- Thickness: 0.040″
- E: 1 3/8″
- D: 7/8″
- C: 1 5/8″
- B: 14″ – 21 1/2″
- A: 12 1/2″ – 20″
- Static Load 1: 300 lb
- Static Load 2: 200 lb
ADDITIONAL PRODUCT DETAILS
Static Load 1 represents a distributed load for 12″ – 20″ (300 – 500 mm) installations and a point load for 12″ – 16″ (300 – 400 mm) installations. Static Load 2 represents a point load for 16″ – 20″ (400 – 500 mm) installations.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries: +31 13 5835404
APAC
Shanghai:
+J86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>