nVent 613440 Erico Copper Bonded Ground Rod Owner’s Manual
- June 9, 2024
- nVent
Table of Contents
nVent 613440 Erico Copper Bonded Ground Rod
FEATURES
- 99.9% pure electrolytic copper coating
- Rods have a high carbon steel core and tip that provide superior strength when driving
- Copper coating will not crack when bent or tear when driven
- Minimum copper coating of 10 mils on rods listed to UL® 467
- nVent ERICO name, length, diameter and part number is roll-stamped within 12″ (304,8 mm) of chamfered end
- UL logo and control number where applicable stamped on each rod for easy inspection after installation
PRODUCT ATTRIBUTES
- Material: Copper-Bonded Steel
- Tensile Strength: 80,000 psi Min
- Ground Rod Diameter, Nominal: 3/4″
- Ground Rod Diameter, Actual: 0.681″
- Length: 4′
- Plating Thickness: 10 mil
- Unit Weight: 5.600 lb
- UPC Label: No
- Complies With: IEC® EN 62561-2
ADDITIONAL PRODUCT DETAILS
- For rods to be listed to UL® 467, they must be at least 8′ (2.44 m) in length.
- IEC® EN 62561-2 supercedes EN 50164-2.
- Additional lengths available.
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
DIAGRAMS
NEED HELP
- North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
- Europe
- Netherlands:
- +31 800-0200135
- France :
- +33 800 901 793
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>