PSHRFANST Modern Ceiling Fan User Guide
- June 9, 2024
- PSHRFANST
Table of Contents
PSHRFANST Modern Ceiling Fan User Guide
1. Download the APP
Way 1 Search and download the APP “Argracelight” on Apple Store, or “Argrace Smart” on Google Store.
Way 2 Scan the QR-Code to download the app.
Caution: If the QR-Code above is not valid, please scan the spare QR- Code.
2. Register and Sign in
Register an account as per the instructions to your phone, and sign in your account
Enter your email to create an account, then check your email for the verification code you received and enter it. Finally set your password to complete your account registration.
Attention: Be sure to “√” the “Privacy Policy” after you enter your phone number.
3. Add Device
Add a device to your phone as the following steps:
Add device → Fan Light(Category) → Warm White Light
Fan →Name your device(Equipment Name) → Confirm → Add device successfully
4. APP Connection
Open the Bluetooth, Power off the fan and then power it on again, and press the [Pair] button within 10 seconds to complete Bluetooth Pair. If the light flashes 3 times, the pairing is successful.
Attention: Be sure to open the bluetooth every time you operate the fan by phone, or you will fail to operate the device.
5. APP Function Display
The fan or the light can be controlled separately, you can operate according to your need.
On the [Master Control] Page, you can see the total! devices of your home, and you can control each device seperately with the power off and on of the fan and the light.
6. Dimmable LED Light
The light color and brightness are adjustable, you can adjust the light for your scence.
- In the rectangular color block area, you can adjust the color of the light according to the color on the color block
- The light brightness can be adjustable from 1°/o-100%
- There are 8 common light scenes, you can adjust the color light by referencing these scenes.
7. Timer Setting
The light and fan both support timer setting from 0-24 Hours.
8. Multi-phone Controlled
You can add your home member to control the fan with you.
Steps: Current Family(My Home)→Home Management → My Home → Add Member → (QR-
CodeNia Account)
You can find your QR-Code/Via Account on Home page.
Read More About This Manual & Download PDF: