nVent DT130010R DT1 DIN Rail Surge Protection Class I Plus II 12.5 KA Owner’s Manual
- June 9, 2024
- nVent
Table of Contents
nVent DT130010R DT1 DIN Rail Surge Protection Class I Plus II 12.5 KA
FEATURES
- yet high surge rated pluggable design, using minimum DIN rail width
- External back-up fuse is not required up to 315 A (IEC only)
- Retaining clip ensures enhanced vibration and shock resistance performance
- Red/Green status indication and change-over contacts standard for remote monitoring
PRODUCT ATTRIBUTES
- Nominal System Voltage (Un): 240 V
- Nominal Discharge Current (In), IEC: 20 kA 8/20 μs
- Max Continuous Operating Voltage (Uc): 300 V
- Max Discharge Current (Imax), IEC: 50 kA 8/20 μs
- Impulse Current (Iimp): 12.50 kA 10/350 μs
- Voltage Protection Level (Up): 1,400 V
- Response Time: 25 ns Max
- Back-Up Fuse @ Isccr: 250 A @ 50 kA;315 A @ 25 kA
- Frequency: 50 – 60 Hz
- Short Circuit Current Rating (Isccr): 25 kA;50 kA
- Protection Modes: L-PE;L-PEN;N-PE;L-N
- Temporary Over Voltage 120 min (Ut/mode): 442 V Safe Fail
- Temporary Over Voltage Withstand 5 s (Ut): 337 V
- Voltage Protection Rating (VPR): 900 V
- Nominal Discharge Current (In), UL: 20 kA 8/20 μs
- Replacement Module: DT1300M
- Short Circuit Current Rating (SCCR): 200 kA
- Technology: Thermal Disconnect
- Torque: 3.32 ft lb
- Connection, Stranded: #4 Max
- Connection, Solid: #2 Max
- Humidity: 5 – 95 % RH
- Temperature: -31 to 185 °F
- Enclosure Material: UL® 94V-0 Thermoplastic
- Enclosure Rating: IP 20
- Mounting: 35 mm top hat DIN rail
- Status Indication: Mechanical flag
- Remote Contacts: Yes
- Remote Contact Switching Capacity: 0.5 A @ 12 VDC;0.5 A @ 24 VDC;0.5 A @ 48 VDC;1.0 A @ 125 VAC;1.0 A @ 250 VAC
- Depth: 3.350″
- Height: 3.540″
- Width: 0.710″
- Unit Weight: 0.402 lb
- Certification Details: UL® 1449 Edition 4 Type 1CA
- Complies With: EN 61643-11 Type 1, Type 2;IEC® 61643-11 Class I, Class II
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support.
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries: +31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>