Harley Benton 522107 Loud and Louder User Guide
- June 9, 2024
- Harley Benton
Table of Contents
Harley Benton 522107 Loud and Louder
Quick Start Guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.
Safety instructions
Intended use
This device is intended for use as effects pedal for electric bass guitars.
Any other use or use under other operating conditions is considered to be
improper and may result in personal injury or property damage. No liability
will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke!
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Dual effects pedal for electric bass guitars
- The effect modules A and B can be used simultaneously or individually and in any order
- Adaption of the original japanese green Overdrive circuit with smooth gain and pronounced mid-hump characteristic (effect module A)
- Clean boost with 20 dB gain value and 2-band EQ control (effect module B)
- Powerful, dynamic and open hot mode
- Traditionally compressed and smooth warm mode
- 3-way switch for effects order
- Foot switches with LED indicators
- Power supply via 9 V power adapter (not included, suitable optional power adapter: item no. 409939, no battery operation)
Operating elements
- TREBLE Rotary control for adjusting the high bass frequencies of the Boost effect
- 9 V Socket for connecting a power adapter (not included)
- LEVEL Rotary control for adjusting the volume level of the Overdrive effect
- Hot / Warm Switch for selecting the tone mode of the Overdrive effect
- TONE Rotary control for adjusting the tone colour of the Overdrive effect
- DRIVE Rotary control for adjusting the gain level of the Overdrive effect
- INPUT 1/4″ jack socket for connecting instruments
- Overdrive Foot switch for switching on/off the Overdrive effect
- Booster Foot switch for switching on/off the Booster effect
- OUTPUT 1/4″ jack socket for connecting an amplifier
- GAIN Rotary control for adjusting the input level of the Booster effect
- Switch for selecting the operation mode
- B The Overdrive and Booster effects can simultaneously be enabled. The signal will go through the Overdrive effect and then to the Booster effect.
- A or B Either the Overdrive effect or the Booster effect can be enabled.
- B – A The Booster and Overdrive effects can simultaneously be enabled. The signal will go through the Booster effect and then to the Overdrive effect.
- BASS Rotary control for adjusting the low bass frequencies of the Booster effect
- VOLUME Rotary control for adjusting the volume level of the Booster effect
Technical specifications
- Input connections: 1/4″ jack socket Socket for connecting a power adapter
- Output connections: 1/4″ jack socket
- Power supply: External power adapter, 100 – 240 V ~ 50/60 Hz
- Power adapter:
- Secondary current 100 mA
- Secondary voltage 9 V
- Polarity centre negative
- Dimensions (W × H × D): 95 mm × 37 mm × 120 mm
- Weight: 320 g
- Ambient conditions:
- Temperature range 0 °C…40 °C
- Relative humidity 20 %…80 %
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household was-te, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
DISPOSAL
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal house-hold waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de