Redmi Buds 3 User Manual
- June 9, 2024
- Redmi
Table of Contents
Redmi Buds 3
**
**
Read this manual carefully before use, and retain it for future reference. Illustrations of products, accessories and user interfaces in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Product Overview
-
Charging Case
-
Earbuds
Wearing
- Gently place the earbud into your ear canal, then adjust it to a comfortable position.
- During calls, make sure to point the primary microphone towards your mouth for clearer calls.
Charging
-
Before use, please remove the protective film from the contact points on both earbuds and fully charge the charging case and the buds.
-
Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously.
-
When the charging case is not fully charged, its indicator is white. When it is fully charged, its indicator is off.
Turning On
- When the buds are in the charging case, open the lid to automatically turn them on.
- When putting the earbuds into the charging case while they are turned off, the earbuds will be automatically turned on.
Connection
First-time connection
Both earbuds will enter the awaiting connection mode when the charging case’s lid is opened. After enabling the phone’s Bluetooth, search for and tap ‘Redmi Buds 3’ to connect the earbuds to the phone.
Note: If the earbuds cannot be connected, place them back into the charging case, close the lid, and repeat the above operation.
Reset Earbuds
If the earbuds cannot connect properly, please follow the below steps to reset them. Open the lid of the charging case and place both earbuds in the case. Press and hold the charging case button for 10 seconds, and the charging case’s indicator will blink white for 3 seconds and turn off, indicating the earbuds have been reset successfully (the connection records between the left and right earbuds, and the earbuds and the phone have been cleared).
Function Overview
Answer/End calls
Double tap the left/right earbud’s multi-function touch area to answer a call,
and tap the left/right earbud’s multi-function touch area three times to
decline or hang up the call.
Play/Pause Music
-
Method 1: Remove the earbuds to pause the music and wear the earbuds to start playing the music.*
Method 2: Press and hold the left/right earbud’s multi-function touch area to pause/play the audio. -
After manually pausing the music, the music will not play automatically when you remove and wear the earbuds again.
Play the next track/previous track
When playing audio, double tap the earbud’s multi-function touch area to play
the next track; and then tap the earbud’s multi-function touch area three
times to play the previous track.
Answer a Second Call
Double tap the left/right earbud’s multi-function touch area to put the
ongoing call on hold and answer the incoming call, and tap the left/right
earbud’s multi-function touch area three times to hang up the current call and
answer the call on hold.
Switch between single/dual bud mode
When both buds are connected successfully, they are in dual-bud mode. If place
one of the buds back into the charging case and close its lid, the other bud
will automatically enter the single-bud mode. When removing the second bud
from the charging case, the dual-bud mode will automatically be restored
again.
Fast Pairing
Place the earbuds into the charging case and close its lid. Make sure the
Mi/Redmi phone’s Bluetooth is enabled and hold it close to the charging case,
then open the case’s lid and follow the on-screen instructions to connect the
phone to the earbuds.
Note: To use the feature to quickly connect, please update your Mi/Redmi phone to the latest stable version. Then open Additional settings in your phone’s Bluetooth settings to enable Pair compatible devices. This feature is currently only supported by some Mi/Redmi phones.
Automatic connection
When the earbuds are in the charging case, opening the lid of the charging
case will automatically connect the earbuds to the most recently used
Bluetooth device. If the earbuds are not connected to any device, they will
automatically enter the awaiting connection state.
Wearing detection
The built-in optical sensor can detect the earbud’s wearing state in real-
time, it can detect when the earbud is in the ear. For example, if the device
the earbuds are connected to is paused, wearing the earbuds will start the
music, and removing the earbuds will pause the music.
Note: Once the weather is cold outdoors and your hands become dry, the buds may not function when touching them.
Specifications
- Name: Wireless Earphones
- Model: M2104E1
- Frequency Band: 2402–2480 MHz
- Max RF Output Power: < 20 mW
- Earbuds
- Dimensions: 40.7 × 16.9 × 18.7 mm
- Net Weight (per earbud): Approx. 4.47 g
- Wireless Range: 10 m (in an obstacle-free environment)
- Cell Capacity (per earbud): 35 mAh
- Input: 5 V=70 mA
- Cell Type: Lithium-ion polymer cell
- Wireless Connectivity: Bluetooth 5.2
- Charging Case
- Model: M2104E1
- Dimensions: 49.6 × 49.6 × 24.5 mm
- Battery Capacity: 310 mAh
- Input: 5 V=500 mA
- Output: 5 V=150 mA
- Battery Type: Lithium-ion polymer battery
- Storage Temperature: 0 °C to 45 °C
- Operating Temperature: 5 °C to 40 °C
- Service Life: 1 year
Important Safety Information
- Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
- Keep the product’s indicator away from the eyes of children and animals while the product is in use.
- Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
- Do not disassemble, puncture, or crush the product nor expose it to fire.
- Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling.
- To prevent possible hearing loss, do not use high volume for long periods of time.
- This product is not a toy and may contain small parts. Please keep them out of the reach of children. Disposal of a battery into a fire or a hot oven or water or other liquids
- or mechanically crushing or cussing of a battery can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Product information and certification marks are located in the Charging Case.
- Do not put the battery in the trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations.
- Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte, etc).
- = The symbol indicates DC voltage.
- This device is equipped with a built-in battery that can not be removed or replaced. Do not disassemble or modify the battery by yourself.
- Only use certified chargers supplied by qualified manufacturers.
EU DECLARATION OF CONFORMITY
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2104E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2104E1 is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html
Compiles With IMDA Standards DB106135
75323/SDPPI/2021 9003 CIDF15000056
- Manufactured for: Xiaomi Communications Co., Ltd.
- Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi Ecosystem company)
- Address: Suite 204, 4th Block, No. 86 Hongtu Road, Nancheng District,Dongguan, Guangdong, China
- User Manual Version: V1.0 For further information, please go to www.mi.com
- Importer: Beryko s.r.o. Na Roudné 1162/76, 301 00 Plzeň www.beryko.cz
FAQ’s
Is the Redmi Buds 3 waterproof?
The Redmi Buds 3’s earphones have been meticulously created to exceed IP54* standards for dust and water resistance (level 5 dustproof and level 4 water- resistant), protecting them from spills and perspiration.
How long should the Redmi Buds 3 be charged?
1.5 hours for the headphones and 2.5 hours for the case to charge.
Is quick charging supported by the Redmi Buds 3?
The charging case must have at least 20% battery life left in order to complete a 10-minute quick charge.
Has the Redmi Buds 3 wireless charged capability?
Additionally, the charging case supports Qi wireless charging, which makes charging really simple.
How much time can earphones be used after charging?
The majority of wireless earbuds have a five to six-hour battery life on a single charge, however, some expensive headphones are rated to last all day.
How durable are Redmi earbuds?
The earbuds offer 4 hours of music listening when completely charged with the charging case.
How long should my Redmi earbuds be charged?
When charging, the indicator blinks red; when fully charged, it turns white. Please be aware that a full charge takes about an hour.
Can I use the Redmi Buds 3 Pro to shower?
Due to their IP54 certification, the Redmi Buds 3 are resistant to splashes (such as rain), perspiration, and dust. They cannot, however, be worn in the shower or submerged in water.
What is the lifespan of Redmi Buds 3?
Even mid-range or high-end earbuds struggle in this situation, yet the Buds 3 Lite worked well for me during voice and Zoom chats. The Redmi Buds 3 Lite’s total battery life is advertised as being 18 hours, and each bud lasts roughly 6 hours. On a full charge, your earbuds can be recharged from the case approximately three times.
How can I tell whether my Redmi Buds 3 is fully charged?
The charging case’s indication appears white when it is not fully charged. The indication is set to o when it is fully charged. the first time meeting When the lid of the charging case is opened, both earbuds will go into the awaiting connection mode.
How can you tell if the Redmi Buds 3 battery is low?
examining the earbuds’ battery life You can check the earbuds’ battery life on the phone’s status bar after pairing them with a device.
How do the Redmi Buds 3 answer calls?
Reply to/end calls To answer a call, double-press the left/right earbud’s multi-function touch area. To decline or end a call, tap the left/right earbud’s multi-function touch area three times. Play and stop music To pause/play the audio, press and hold the multi-function touch area on the left or right earpiece.
How can I check the Redmi Buds 3’s battery?
When the pop-up window appears, simply open the charging case beside your smartphone and tap the screen.
Download this PDF Link:Redmi Buds 3 User Manual