Chacon IPCAM RI-03 Indoor Rotating HD WiFi Camera User Guide
- June 9, 2024
- CHACON
Table of Contents
IPCAM RI-03
Quick start guide
IPCAM RI-03 Indoor Rotating HD WiFi Camera
- Packing list
- Product description
- Device configuration
- Legal notice
Packing list
Product description
Notice
To reset the device, press and hold the reset button for 5 seconds.
The camera beeps when the operation is complete.
Flashing red light (slow) | Waiting configuration |
---|---|
Flashing red light (fast) | Searching WiFi network |
Fix blue light | Camera connected to WiFi |
Flashing blue light | Access point mode |
Camera configuration
Step 1 Turn on your camera by plugging in the power adapter.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download My Chacon app from the Apple Store or Android Play Store
depending on your device.
Step 4 Launch My Chacon app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on-screen
instructions.
Note
– If you have multiple cameras, please follow step 5 again to add devices one
by one.
– To change Wi-Fi network, please restore the camera to factory settings and
follow step 5 to add the camera.
For more information, please download the user manual at
www.chacon.com
Specifications
Sensor type | 1/3″ CMOS |
---|---|
Min. Brightness | Color 0.01Lux@F1.2 |
Black and white 0.001Lux@F1.2 | |
Resolution | 2 Mega pixels |
Lens | 3.6mm F2.0 |
Shutter | 1/25-1/100,000 per second |
Infrared | High power LED with ICR |
Infrared distance | 10 metres |
Pan/Tilt | 00-3559-100-75° |
Video compression | H.264 |
Bit rate | 32Kbps-2Mbps |
Max resolution | 1920 x 1080 |
Framerate | 1-25 per second |
Picture settings | Support HD/SD;support flip; |
Storage | SD card(Max 128G) |
Audio | Two-way audio |
Protocols | HTTP,DHCP,DNS,RTSP |
WiFi standard | IEEE802.11b/g/n |
Frequency | 2.4 GHz — 2.4835 GHz |
Bandwidth | 20/40MHz |
WiFi encryption | WPA-PSK/WPA2-PSK |
Security | AES128 |
Working temperature | -20°C-55°C |
Power | DC5V,1A |
Consumption | 2.5W MAX |
Size(mm) | 87×123 |
Model | TPA-67F050100VU01 |
Input voltage | 100-240Vac |
input frequency | 50-60Hz |
Output voltage | +5Vdc |
Output current | 1A |
Output power | 5W |
Efficiency | 73,62% |
No-load Consumption | < 0.1W |
Support
www.chacon.com/support
Symbols
Direct current (DC)
Don’t throw batteries or out of order products with the household waste
(garbage). The dangerous substances that they are likely to include may harm
health or the environment. Make your retailer take back these products or use
the selective collect of garbage proposed by your city.
**** Hereby, Chacon, declares that the radio equipment type ‘IPCAM-RI03’ is
in compliance with the
Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the
following Internet address: http://chacon.com/conformity
For indoor use only
Warning
– The AC adapter must be connected inside the house and in a dry room only.
– Do not install near heat sources.
– Keep the AC adapter accessible so that it can be easily disconnected if
necessary.
– If you need to clean the product, use a soft cloth.
Tip:
Any material between the product and your Wi-Fi router reduces the operating
distance (mainly: reinforced concrete wall, concrete wall, metal surfaces).
Take this into account when determining the positioning of your camera.
Chacon S.A. Avenue Mercator 2 • 1300 Wavre • Belgium
www.chacon.com
V1.1 221221
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>