Forum Lighting CUL 4003 Kinetic Wall Switch On/Off Receivers User Manual
- June 9, 2024
- Forum Lighting
Table of Contents
- A. What is in the box ?
- B. Specifications
- C. Functions of parts
- D. Wiring Diagram
- E. Installations
- F. Pairing with Kinetic Switch
- G. Pairing to Tuya App (WiFi Version)
- H. Un-pairing
- I. Pairing Limitations
- J. Control the On / Off Receiver via Kinetic Switch
- K. Control the On / Off Receiver via Tuya App
- L. Attentions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Forum Lighting CUL 4003 Kinetic Wall Switch OnOff Receivers
Important note: Isolate power before connecting receiver. Failure to do so can cause electric shock, fire or other hazards.
A. What is in the box ?
B. Specifications
Dimensions:
Product Code:
RF KR01-ND-RF
RF & Wif KR01-ND-WF
Dimming:
N / A
Power: 300W LED (800W Resistive loads)
Input Voltage: AC85~240V 50/60Hz
Radio Frequency: RF 433MHz; WiFi 2.4G for Smart Versions.
IP Rating: IP20; Indoor use only.
C. Functions of parts
D. Wiring Diagram
E. Installations
A. Disconnect the mains before installation.
Installation must be carried out by licensed electricians.
B. Fix the cables to the receiver firmly.
C. Press the Pairing Key to pair to switches.
D. Fix the receiver by screws or sticker provided.
F. Pairing with Kinetic Switch
- Pairing to kinetic switch – Standard method
a. Press the Pairing Key for 3-4s, until the RED indicator flash slowly.
b. While the indicator on receiver flashes, press the Kinetic switch ONCE
to complete the pairing.
- Pairing to kinetic switch – Remote pairing to installed receiver.
a. Turn On the Light
b. Press 8 times on Paired Switch within 6s
c. Receiver enters a Switch Pairing window
d. Press the key of unpaired switch ONCE to complete the pairing.
G. Pairing to Tuya App (WiFi Version)
- For Tuya App Pairing
Note: Tuya App pairing available from the time of powering up the receiver.
a. BLUE Indicator continously flashes.
b. Sucessful pairing stops the BLUE flash.
Download Tuya Smartlife App to process:
Please note, 5G Router is NOT compatible
You may pair RF & Smart Receiver to Kinetic Switches by following Pairing Step
H. Un-pairing
a. Kinetic Switch
Un-pairing from receiver
b. Tuya App
Un-pairing from Tuya App
I. Pairing Limitations
Max. 10 Kinetic Switches to pair ONE On / Off Receiver.
To avoid sync problem, we DO NOT suggest to pair multiple On / Off receivers
to one or multiple Kinetic Switches.
J. Control the On / Off Receiver via Kinetic Switch
Single press to Turn On/Off
K. Control the On / Off Receiver via Tuya App
Follow Tuya App User Manual for better experience.
Scan the QR code to Tuya User Manual.
L. Attentions
Do not cover with insulations.