Harbor Breeze ZDL1104-LED2K8030 Low Voltage LED Outdoor Path Light Instruction Manual
- June 9, 2024
- Harbor Breeze
Table of Contents
ZDL1104-LED2K8030 Low Voltage LED Outdoor Path Light
Instruction Manual
ZDL1104-LED2K8030 Low Voltage LED Outdoor Path Light
Thank you for purchasing this Harbor Breeze product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
1-888-251-1003, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or damaged,
do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
No tools required
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| The light does not turn on at night. | 1. The transformer is not plugged in or |
turned on.
2. Fixture connector is not properly installed on the low voltage cable.| 1.
Make sure the transformer is plugged in and turned on.
2. Make sure the contact pins pierce the wire insulation and make proper
contact with the wire.
CARE AND MAINTENANCE
Clean the lens, lamp head and lamp stand regularly with a non-abrasive
cleaner.
Warning: Always make sure the flood light is unplugged and completely
cool before attempting to clean it
WARRANTY
This fixture is warranted to be free from defects in materials and
workmanship for five (5) years from the date of original purchase. Call
1-888-251-1003, to obtain a Return
Authorization number and further instructions. The manufacturer will be liable
for the replacement of the defective item and will not be liable for any other
loss, damage, or injury which is caused by the product
**** SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This product is not a toy and must not be operated by children.
- Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
- Do not submerge in water. The product can be damaged.
- Use with 18AWG minimum, underground low-voltage circuit cord.
QUICK REFERENCE GUIDE
PACKAGE CONTENTS
INSTALLATION OVERVIEW
**** Insert wire from low-voltage transformer (sold separately) into the wire guide by twisting the wire into each end of the wire guide. Align the pins on the connector top cover so that each pin lines up with opposite sides of the wire. Securely tighten the connector top cover making sure the pins completely pierce the plastic shield of the wire.
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>