Harbor Breeze ZDL1140-L5K8030Z LED Post Cap Light Instruction Manual

June 9, 2024
Harbor Breeze

harbor-breeze-logo

Harbor Breeze ZDL1140-L5K8030Z LED Post Cap Light

SAFETY INFORMATION

  • This product is not a toy and must not be operated by children
  • Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
  • Do not submerge in water. The product can be damaged.
  • Use with 18AWG minimum, underground low-voltage circuit cord.

WARNING

  • Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
  • For use with low-voltage landscape lighting systems only.
  • The wire is intended for shallow burial, less than 6 in. deep.
  • Risk of Electric Shock.Install all luminaires 10 ft. or more from a pool,
  • Keep lamp away from material that may burn.
  • Do not touch hot lens, guard or hot fixture housing.
  • Do not operate or install a fixture with missing or damaged parts.
  • Do not touch the LED at any time as this may cause damage to the fixture.

PACKAGE CONTENTS

Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-
FIG1

HARDWARE CONTENTSHarbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-
FIG2

INSTALLATION OVERVIEW

Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-FIG3

  1. Pass low voltage transformer supply wire through the base.Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-FIG4
  2. Insert fixture wire into contact plate. Firmly push the wire onto the contact pins with the press plate.Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-FIG5
  3. Place top cover over press plate and snap into the contact place locking tabs.Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-FIG6
  4. Screw top cover and bottom base together tightly to drive transformer wire onto the contact pins on the inner side of the contact plate

OPTION 1Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-Cap-Light-
FIG7 Harbor-Breeze-ZDL1140-L5K8030Z-LED-
Post-Cap-Light-FIG8

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.

  • Estimated Assembly Time: 10 minutes

TOOLS REQUIRED (NOT INCLUDED)

Harbor-Breeze-ZDL1140-L5K8030Z-LED-Post-
Cap-Light-FIG9

FEELING CONFIDENT? START YOUR NEXT PROJECTHarbor-Breeze-ZDL1140-L5K8030Z-
LED-Post-Cap-Light-FIG10

Visit www.lowes.com for more information.

TROUBLESHOOTING

PROBLEM

  • The light does not turn on at night.

POSSIBLE CAUSE

  • The transformer is not plugged in or turned on.

CORRECTIVE ACTION

  • Make sure the transformer is plugged in and turned on.

CARE AND MAINTENANCE

Clean the lens, lamp head and lamp stand regularly with a non-abrasive cleaner. Warning: Always make sure the light is unplugged and completely cool before attempting to clean it.

WARRANTY

This fixture is warranted to be free from defects in materials and workmanship for five (5) years from the date of original purchase. Call to obtain a Return Authorization number and further instructions. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury which is caused by the product.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Thank you for purchasing this Harbor Breeze product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-888-251-1003, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at [email protected] or visit www.lowespartsplus.com.

HARBOR BREEZE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Harbor Breeze User Manuals

Related Manuals