eufy T8321 Baby Video and Audio Baby Monitor User Manual
- June 4, 2024
- Eufy
Table of Contents
T8321 Baby Video and Audio Baby Monitor
Skip to content Manuals+ User Manuals Simplified.
eufy Video Baby Moniter 720 User Manual
Home » Eufy » eufy Video Baby Moniter 720 User Manual
Contents [ hide 1 eufy Video Baby Moniter 720 User Manual 2 WHAT’S IN THE BOX
3 FEATURE INTRODUCTION
3.1 Monitor Features 4 Camera Features 5 SETTING UP THE CAMERA AND MONITOR
5.1 Charge the Monitor 6 Charge the Camera 7 ADDING A NEW BABY CAMERA TO THE
BABY MONITOR 8 USING THE BABY MONITOR 9 MOUNTING THE BABY CAMERA ON THE WALL
10 MONITOR MENU SETTINGS 11 Menu Settings
11.1 Menu Options 11.2 Description 12 On-screen Menu Icons 13 NOTICE 14
Declaration of Conformity 15 FCC Statement 16 FCC Radio Frequency Exposure
Statement 17 Read More About This Manual & Download PDF: 18 File Downloads 19
References 20 Related Manuals
eufy Video Baby Moniter 720 User Manual
WHAT’S IN THE BOX
Video Baby Monitor nDP Video Baby Monitor 720P
Model: T8321-C
Model: T832 I -M
FCC ID:2AOKB-T8321 C FCC ID:2AOKS-T832 IM
IC:23451-T8321C
IC:2345 I -T832 IM
Wall Mount
Monitor Micro-USB Power Cable ( I m)
Camera Micro USB Power Cable
Camera Adapter (SY IA)
Monit0r Adapter (SY 2A)
Mounting Screws
Welcome Card Note: Power adopter varies by region. FEATURE INTRODUCTION
Monitor Features
User Manual
1. CD Screen 2. Menu button 3. Navigation button 4. OK button
Press to confirm the selection Press to switch camera display if more than 2
cameras added 5. Return to previous level of menu I Talk button Press and hold
to speak to the camera When menu is opened, press to retum to the previous ,
level of menu 6. LED indicator Red: charging White: Fully charged 7. Micro USB
charging port 8. Volume down 9. Volume up 10. Power button 11. Zoom button 12.
Reset 13. Speaker
Camera Features
1. Microphone 2. Standard camera lens 3. LED indicator
4. Temperature sensor 5. Pairing button 6. Micro USB port 7. Speaker SETTING
UP THE CAMERA AND MONITOR
Charge the Monitor
Fully chorge the monitor before use. To charge: 1. Connect one end of the
micro USB cable to the boby monitorond the other end to the power adapter
(5V/2A). 2. Plug the odapter into a power outlet. 3. Press and hold the power
button for 2 seconds to turn the baby monitor on.
Charge the Camera 1. Connect one end of the micro USB cable to the baby
camera, and the other end to the power adapter (SY IA). 2. Plug the power
adapter into a power outlet.
The new baby monitor and comera wlll set up automatically .You are all set to
use the produces after the monitor and camera are fully charged. ADDING A NEW
BABY CAMERA TO THE BABY MONITOR The baby camera and baby monitor are paired
and ready to use right out of the box. Refer to tl,e following steps when
adding extra baby cameras or after resetting a baby camera.
1. Enter menu setting,, go to Camera -> Add Camera, then follow the onscreen
instructions to start the pairing.
2. Press and hold the pairing button on tl,e rear of the camera for I second
until a notification prompt is heard. 3. Check the firmware version of the
monitor (see image below) to make sure your baby monitor and camera are
running the same, latest
firmware version.
To check whether it is the latest version: 1. CD Visit the website below:
https://www.eufylife.com/support/5505/spaceview-baby-monitor 2. If the
firmware version is lower than the version shown online (highlighted in
green), click the firmware version to download. The downloaded file includes
firmware for both T8300 and T8321 models, make sure you use the TB32 I
firmware. 3. Follow the steps in the “eufy Security Software Upgrade Guide”
video or Firmware Upgrade Manual to complete firmware upgrade.
Note:· The eufy Security Spaceview baby camera can be added to the monitor.
Before adding: the camera1 make sure SpaceView baby camera is running the
same, latest version : with the monitor1s. : Chrome OS is not supported for
firmware upgrade. , Before you upgrade firmware, use the provided micro USB
cable (Im) to connect the: device needed to your computer. USING THE BABY
MONITOR When more than 2 cameras are added to the monitor; you can manually
switch among cameras by pressing the monitor’s OK button. Once the camera
swit.ch is completed, the icon of the selected camera will oppear on the comer
of the boby monitor. You can also select the “Cycle Camera” option. The screen
cycles through the list of connected baby cameras according to the preset
intervals. Note: The monitor will emit a loud noise if placed too close to the
camera. This is normaJ and is i re5olved 0nc:e the c:amera is moved away from
the m0nitor. MOUNTING THE BABY CAMERA ON THE WALL
1. Place the wall mount against the wall, matching the direction as UP
indicates. Mark the screw holes with a pencil.
2. Drill’/,” holes into the wall and then insert anchors into the holes.
Anchors are not needed for wooden walls.
3. Insert the screws through the mounting holes of the wall mount and screw-
into the anchors.
4. Snap the baby camera onto the wall mount. OB 5. To get the optimal viewing
angle, rotate the camera (25°upwards, 60· backwards, 250° horizontally)
manually, as pan and tilt functions are
not supported on this model when using the navigation button.
MONITOR MENU SETTINGS Press and hold the power button to power on the
monitor.. Press the menu button to open Menu Settings. Menu Settings
Menu Options Brightness Sleep Mode Sound Alert
Lullaby Zoom
Menu Options
Description
Set the brightness of the screen.
Enable to automatically wm off the screen after I min, 3 min, 5 min or Off.
You can set the baby monitor to alert you when a specific noise level is Sound
Alert detected. Note: Surrounding noise might set off false alarm.
Select your desired lullaby song. You can adjust the volume by selecting the
volume button. Note: Sound Alert Is automatically disabled when Lullaby
function Is enabled. Warning: Your baby’s cry misht be obscured by the sound
of a lullaby.
Zoom in I out
Description
Alarm
Set alarm on I off Specify the duration when the alarm will sound Set the volume Set the temperawre alert when it exceeds the specified temperature Set an alarm clock
Add Camera Note: You can add up to 4 cameras per baby monitor.
Camera
Delete Camera
Cycle Cameras Cycles through the list of connected baby cameras according to
the preset interval,.
Time Set
Set the time on the monitor.
Night Vision Mode
When Auto is enabled, the camera will change the screen color according to the light conditions in the room. When disabled, the camera will stick to daylight screen color and will not change when the surrounding environment is getting dark. Note: We recommend setting this function to On for most of the situations.
Anti-Screen Flicker
Changes the refresh rate of the screen to prevent flickering.
Language
Sets the on-screen display menu language.
Default Settings
Resets all options to their default setting.
Temperature Unit
Select your desired temperature measure unit.
Connect with Us
Contact details
Note: The interval duration between each sound alert is 30 seconds. It will not sound alerts
during this interval, even if the conditions. are met to trigger an alert.
On-screen Menu Icons Icon
Icon Description Wireless signal strength
Night Vision Mode is enabled
Shows the camera that is currently presenting on the baby monitor screen Note: This icon will not appear on the screen when there is only one camera connecred to the monitor.
Cycle Cameras enabled
Sound Alert enabled
Sound level of the room the camera is in
Current time
Current battery level of the baby monitor
Current operating temperature NOTICE Warning Strangulation Hazard: Children
have STRANGLED in cords. Keep this cord out of the reach of children (more
than Im (3ft) away). Never use extension cords with AC Adapters. Only use the
AC Adapters provided.
This product complies with the radio interference requirements of the European
Community. Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device Is ln compliance
with the essentlal requirements and other relevant previsions of Directive
2014/53/EU. For the dedaracion of conformity, visit the Web site:
www.eufylife.com This product can be used across EU member states. Due to the
used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is
prohibited. The adapter shall be installed near the equipment and shall be
easily accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment. The
suitable temperature forT8321-M and accessories is -20’C-40’C. The suitable
temperature forT8321-C and accessories is -20°C-40°C. When charging, please
place the device in an environment that has a normal room temperature and good
ventilation. It is recommended to charge the device in an environment with a
temperature that ranges from .5’C-25’C. Please ensure to use only the charger
offered by the manufacturer. Using unauthorized charger may cause danger and
violate the authorization of the device and the guarantee article. The charger
output voltage I current is 5Vdc I IA(forT8321-C) and 5Vdc / 2A
(forT8321-M).The plug considered as disconnect device of adapter. If you use a
third-party charger; the recommended output voltage I current of the adapter
is 5Vdc I I A (forT8321-C) and 5Vdc / 2A (forT8321M),and the adapter shall be
CE approval type. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECTTYPE. DISPOSE OF USED BATTERIESACCORDINGTOTHE INSTRUCTIONS RF
exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d~20 cm between the device and the human
body. To maintain compliance with RF exposure requirement. use product tha.t
maintain a 20cm distance between the device and human body. Operating
Frequency Range:2410-2477MHz TheT8321-C Max Output Power: IB.04dBm(EIRP),The
T8321-M Max Output Power: 14.89dBm (EIRP) CE SAit This T832 I -M was tested
for typical body·worn operations with the back of the handset kept 0 mm from
the body. The SAR limit of Europe is 4.0 Wlkg. Device types TB32 I -M has also
been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the limb isl.707Wlkg .This
device was tested for typical hand held operations with the bock of the device
kept 0mm from the Limb. The T8300-C device has been evaluated to meet general
RF exposure requirements and can be used in fixed exposure condition. RF
exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
bady. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body. The following
importer is the responsible party (contact for EU matters only) lmporter Anker
Technology (UK) Ltd Importer Address: Suite El. Fairgate House, 205 Kings
Road, Tyseley, Birmingham, United Kingdom 811 2AA
This product is designed and manufactured with high quality materials and
components, t:16 which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product,. contact your local municipality, disposal service or the shop where
you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (I) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipmem. Note: This equipment
has been tested and found to comply with the limits for a Class 8 digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in a.ccorda. nce with die instructions,
may cause harmful interference to radio communications.. However. there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the inten. ,rence by one or more of the
following measures:(!) Reorient or relocate the receiving antenna.(2) Increase
the separation between the equipment and receiver. (3) Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced radio ITV technician for
help.
FCC Radio Frequency Exposure Statement
The T8321-C device has been ev>.luated to meet general RF exposure
requirements. The T8321-C can be used in fixed exposure condition.The min
separation distance is 20cm. This T8321-M was tested for typical body-worn
operations with the back of the handset kept O mm from the body. RF Exposure
Information (SAR) The Extremity SAR limit of FCC for Hand held is -`I.OW/kg.
Device is recommended to use in hand held only and SAR when hand held is 1.804
Wlkg Worn on body will have unexpected RF exposure RISK. FCC ID (forT8321-C):
2AOK8-T8321C FCC ID (forT8321-M):2AOKB-TB321M The following importer i, the
responsible party. Company Name: POWER MOBILE LIFE, LLC Address:400 108thAve
NE Ste 400, Bellevue, WA 98004-5541 Telephone:
1-800-988-7973
CUSTOMER SERVICE Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610
Nathan Road, Mongkok, Kowloon. Hong Kong
Warranty 12-month limited warranty
Read More About This Manual & Download PDF: File Downloads
User Manual
Download [optimized]
Video Baby Moniter 720 Download
References
FCC ID:2AOKB-T8321 FCC ID:2AOKS-T832
Related Manuals
1. Anker Eufy Security Video Doorbell T8200 User Manual Quick Start Guide
Video Doorbell 2K (Wired) FCC ID:2AOKB-T8200 IC:23451-T8200… 2. eufy RoboVac
User Manual eufy RoboVac Important Safety Instructions To reduce the risk of…
3. Anker Eufy Motion Sensor User Manual USER MANUAL Motion Sensor Anker
Innovations Limited. All rights reserved…. 4. Eufy Security Keypad T8960 User
Manual USER MANUAL Eufy Security Keypad T8960 Anker Innovations Limited. All…
5. eufy T2108 RoboVac 11S User Manual eufy T2108 RoboVac 11S User Manual
Owner’s Manual RoboVac 11S… 6. Eufy HomeBase + Camera + Entry Sensor User
Manual USER MANUAL Eufy HomeBase + Camera + Entry Sensor Anker…
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>