marta MT-FN2532 Stand Fan User Manual

: June 9, 2024
: MARTA

Table of Contents

Introduction
CAUTION
ASSEMBLING THE FAN
USING THE DEVICE
CLEANING AND MAINTENANCE
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marta MT-FN2532 Stand Fan User Manual

Introduction

STAND FAN

GBR Parts list

Front protective grille
Fixing nut of fan blades
Fan blades
Fixing nut rear grille
Rear protective grille
Shaft
Oscillating knob
Motor
Vertical adjustment screw
Control Panel
Screw
Internal telescopic tube
Inner tube retainer
Rack
Decorative cup rack
Base
Remote control

GBR Real set of the appliance could be different from listed in the User manual. Check once buy.

CAUTION

Read this manual carefully before using the appliance and save it for future reference.

Before the first use, check the device specifications and the power supply in your network.
It is not intended for industrial use.
For indoor use only. Use only for domestic purposes according to the instruction manual.
Do not use with damaged cord, plug or other injuries.
Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
Do not use the fan under high humidity conditions (e.g. in the rain) to avoid electric shock and combustion.
Always place the device on flat stable surface.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Do not touch running parts of the fan.
Keep foreign objects away from running parts and grille
Do not block air inlets on the motor block.
Do not use the fan without protective grilles.

ASSEMBLING THE FAN

The device is supplied dismantled. Before assembling make sure that the part list is complete and that the device has not been damaged during transportation.
Do not connect the dismantled unit to power supply. To assemble the unit you have to do the following:
Unscrew four screws from the base (16)
Place the stand (14) on the base and secure it with four screws.
Lower the decorative stand cup (15) on the stand from top to bottom.
Secure the telescopic tube (12) with the stand (16) with a screw to fix the inner tube (13).
The retainer of the inner tube (13) must be screwed in before installing the motor section.
Secure the motor (8) securely to the end of the inner tube (12) with a screw.
Install the rear protective grille (5) on the motor shaft (6) (8) and secure with the rear grill nut (4).
Install the fan blades (3) on the motor shaft (6) and secure with the retainer (2).
Attach the front grille (1) to the rear (5) and secure with the rear grille fixing nut.
In order to change the height of the fan, loosen the screw to secure the inner tube (13), adjust the desired height and tighten the screw

USING THE DEVICE

Key for oscillation turning on/off is located on the motor cover.
Press the button to turn on oscillation, the fan will start rotating. To stop oscillation pull out the button.

BUTTONS

On/Speed – Switching on the fan / changing rotation speed;
Time – Setting timer for switching off the fan;
Off – Switching off the fan.
Mode – selecting rotation mode;

LIGHT INDICATORS

H – maximum rotation speed;
M – medium rotation speed;
L – minimum rotation speed;
4 H, 2 H, 1 H, 0.5 H – programming switching off timer;
SLP – «sleeping» mode;
Nor – normal fixed rotation mode;

REMOTE CONTROL

Control and selection of working modes can be done by control panel as well as remote control:
Mode – selecting rotation mode;
On/Speed – Switching on the fan / changing rotation speed;
Timer – Setting timer for switching off the fan;
Off – Switching off the fan.

CLEANING AND MAINTENANCE

Before cleaning, always unplug the appliance.
Do not use chemical and abrasive cleaners for cleaning.
For seasonal storage use carton to cover the fan.
Loosen fittings and remove the front grille.
Use a cloth soaked in soapy water to the fan fans.
Do not immerse the appliance in water.

SPECIFICATION

Producer:
Cosmos Far View International Limited Room 701, 16 ap

Power supply	Power	Net weight / Gross weight	Package size (L х W х H)
230 V ~ 50 Hz	50 W	2,3 kg / 2,8 kg	450 х 180 х 515 mm

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.