infinitive 703249 Mini Bluetooth Speaker User Guide
- October 30, 2023
- infinitive
Table of Contents
Mini Bluetooth®
Speaker
USER GUIDE
BC
FCC ID: 2ADL-BT-$PK-M3
WIC# 703249
Important Safety Precautions/Cleaning & Maintenance Instructions
When using your mini bluetooth speaker, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS BEFORE USING YOUR MINI BLUETOOTH SPEAKER.
- Never expose your mini bluetooth speaker to high temperatures, extreme cold, high humidity or any moisture or water
- In order to avoid the risk of electric shock, never attempt to open your mini bluetooth speaker or repair it without the assistance of certified professionals
- Your mini bluetooth speaker is not to be used by children or the infirm without suitable adult supervision
- Do not drop your mini bluetooth speaker, throw it, or subject it to strong impacts or physical trauma
- When charging, do not place your mini bluetooth speaker on flammable materials such as rugs, carpets or bedding.
- Clean your mini bluetooth speaker using a soft, moist cloth or paper towel. Do not use harsh chemicals when cleaning your mini bluetooth speaker, and never submerge mini bluetooth speaker in water.
CAUTION Risk of Fire and Burns.
Always Follow All Manufacturer’s Instructions When Using.
CAUTION Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Package contents
Specification
- WIC# 703249
- Model: M3
- Blutooth version: 5.3
- Waterproof: IPX5
- USB-C input: 5V/1A 5W Output power: 5W RMS
- Play time: 25 hours
- Battery: 1200mAh lithium-ion battery
- Dimension: 9.59.54.7 cm
- Weight: 0.55 LBS
Buttons
Connections
How to charge
Step 1: Insert the USB-C of the charging cable into the USB-C charging input port.
Step 2: Connect the USB-A of the charging cable into USB-A of the charger
Step 3: Charging LED indicates the charging status.
*
Charger is not included. And a charger with minimum 5V/1A 5W at USB-A output
is required.
** Fully charge time is around 1.5 hours.
How to connect
Connect to new mob lie device:
Step 1: Turn on the Bluetooth setting on your mobile device
Step 2: Turn on the speaker, press and hold the power button for 2 seconds;
The speaker will go into the Bluetooth pairing mode and the Bluetooth LED will
turn fast blinking.
Step 3: Search Infinitive SoundMini Speaker” from your mobile device and click
it.
Step 4: Once Bluetooth paired successfully, the Bluetooth LED will turn steady
blue.
Step 5: During Bluetooth music playback, the Bluetooth LED will turn slow
blinking
Reconnect to previous device:
Step 1: Make sure your mobile device’s Bluetooth is turned on.
Step 2: Turn on the speaker, press and hold the power button for 2 seconds;
Bluetooth will re-connect with the device automatically and the Bluetooth LED
will turn steady once the re-connection succussed.
Power off:
After enjoying your relaxing moment, press and hold the power button for 2
seconds to tum off the speaker.
How to control
Trouble shooting
- If the speaker volume is too low or no sound, please try to press the volume button on the speaker and mobile device to adjust.
- When you unable to tum on the speaker normally, you can charge speaker for a period of lime and try again.
- When you unable to start Bluetooth pairing or cannot find pairing name from your phone. Please reset by long press @for 8 seconds. And a vioce sounds then you can start the new panng.
- If the speaker crash, please reset by long press for 10 seconds and the device will restart automatically.
Trademark Notice
The Bluetoothe word mark and logos are registered trademarks owned by U
Bluetooth SIG, Inc. and any use of such marks [Infinitive) ts under license.
Infinitive
DISTRIBUTED BY: WALGREEN CO. DEERFIELD, IL 60015
100% SATISFACTION GUARANTEED
walgreens.com ©2023 Walgreen Co.
Questions or comments ? 1-800-925-4733
FCC STATEMENTS
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant toPart 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment andreceiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>