DIGITAL WATCHDOG DWC-XPZAPLM Pole Mount User Guide

Table of Contents

Specifications :

Product Name: Pole mount for DWC-XPZA cameras (Model: DWC-XPZAPLM)
Includes : 5 x Wall Mount Screws, M8 x 30
Additional Accessories: 1 x L Wrench (6.0mm) (for Wall Mount Screws), 2 x Stainless Steel Band 116~140mm, 1x Quick Setup Guide

Installation:

Position the pole-mount in the desired location on the pole. Ensure that the pole’s maximum width does not exceed 650mm (the maximum length of the steel band).
Attach the mount firmly to the pole using the two (2) steel bands included.
Starting from the point where the pole-mount bracket will be attached, measure the circumference of the pole.

Quick Start Guide:
To access support materials and tools, follow these steps:

Go to http://www.digital-watchdog.com/resources.
In the “Search by Product” search bar, enter the part number of your product.
The search results will automatically populate with applicable part numbers.
Click “Search”.
All supported materials, including manuals and quick start guides (QSGs), will appear in the results.

FAQ (Frequently Asked Questions):

Q: What is the maximum width of the pole that the mount can be attached to?
A: The maximum width of the pole should not exceed 650mm, which is the maximum length of the steel band included.
Q: Where can I find additional support materials and tools?
A: You can find all your support materials and tools on the Digital Watchdog website at http://www.digital-watchdog.com/resources. Simply enter the part number of your product in the “Search by Product” search bar to access the relevant materials.
Q: How many steel bands are included in the package?
A: The package includes two (2) stainless steel bands with a length range of 116mm to 140mm.

Pole mount for DWC-XPZA cameras
DWC-XPZAPLM

$DIGITAL-WATCHDOG-DWC-XPZAPLM-Pole-Mount-01 $1$$

NOTE : Download all your support materials and tools in one place.

Go to: http://www.digital-watchdog.com/resources
Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.

Position the pole-mount in the desired location on the pole. The pole’s max width should be no more than 650mm (the max length of the steel band).
Attach the mount firmly to the pole using the two (2) steel bands included.
Starting from the point where the pole-mount bracket will be attached, measure the circumference of the pole. Some poles will taper with their height, so if the pole is tapered, be sure to adapt the band lengths to fit.
Feed the included steel bands through the slots in the pole bracket.
Tighten the clamp on the steel band using a Phillips screwdriver (not included). When the clamp is tightened, check that the end of the band is held in place against the pole.
Bend the band and the clamp to a 90° angle to secure the free end of the remaining length of metal band.
Use the four (4) M8x30 screws included to secure the camera’s wall mount and camera on the pole mount.

$DIGITAL-WATCHDOG-DWC-XPZAPLM-Pole-Mount-01 $2$$