MRCOOL NVCOUPLER Series No Vac Coupler for Universal Quick Connect Lineset Instruction Manual
- June 3, 2024
- MrCOOL
Table of Contents
MRCOOL NVCOUPLER Series No Vac Coupler for Universal Quick Connect
Lineset
MRCOOL® NO-VAC COUPLER
FOR THE UNIVERSAL QUICK-CONNECT® LINESET
When one standard size NO-VAC® QUICK CONNECT® LINE SET is not long enough, two standard QUICK CONNECT® LINE SETS can be combined using our NO-VAC® COUPLER to increase the desired length of the QUICK CONNECT® LINE SETS.
PLEASE READ CAREFULLY AND FOLLOW THE INSTRUCTIONS BELOW
-
Select the No-VAC® QUICK CONNECT® LINE SET size to be lengthened (⅜ or ¾). Then select the second standard line set with corresponding specifications for combined connection using the coupler (as shown below).
-
Use a wrench to assemble the coupler with both F1 and F2 on the corresponding lineset. Make sure the thread is screwed to the bottom until it stops (as shown below).
-
After the connection is complete, cover the F1, F2, and coupler connections with the grey insulating sleeve to help prevent condensation (as shown below).
-
Slide the insulation sleeves together ensuring no copper wiring is exposed and secure in place using tape.
