drive STDS850 Seat Belt Installation Guide
- June 9, 2024
- Drive
Table of Contents
TDS850 Seat Belt
Installation Guide
HOW TO INSTALL A SEAT BELT
STDS850 Seat Belt
-
The seatbelt will be installed on the rear screws of the seat upholstery.
-
Remove one of the rear screws.
-
Take one end of the seatbelt with the underside facing up.
HT SEAT BELT
-
Insert the end of the set belt between the upholstery and the cross brace.
-
Insert the seat screw through the seat upholstery then the seatbelt. It is important to make sure the screw goes through the seat stay that is inside the seat upholstery.
-
Install the screw back into the cross brace and tighten.
-
Repeat this procedure on the opposite side of the seat upholstery.
drivetech.info/drive_mobile/page173.htmlwww.drivetech.info
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>