eta Disc Cutting Attachment Cubes Instructions

: June 9, 2024
: ETA

Table of Contents

Disc Cutting Attachment Cubes
SAFETY NOTICE ****
DESCRIPTION OF THE ACCESSORIES
PREPARATION AND USE
DISC CUTTING ATTACHMENT – CUBES (P)
TABLE FOR THE USAGE OF THE ACCESSORIES
MAINTENANCE (fig. 14)
ENVIRONMENT
TECHNICAL DATA
Documents / Resources

Disc cutting attachment – cubes
INSTRUCTIONS FOR USE eta Disc Cutting Attachment
Cubes

Disc Cutting Attachment Cubes

eta Disc Cutting Attachment Cubes - fig eta Disc
Cutting Attachment Cubes - fig1

Product images are for illustrative purposes only
Extra attachment for food processor ETA 0023 Gratussino, ETA 0028 Gratus, ETA 0030 Meno, ETA 0033 Mezo, ETA 0034 Mezo II, ETA 0038 Gratus Kuliner, ETA 0128, ETA 1128, ETA 3128, ETA 4128 Gustus and meat mincer ETA 6075 Ambo II.
Disc cutting attachment – cubes
eta 002895040
USER‘S MANUAL
Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.

SAFETY NOTICE ****

Consider the instructions in the user‘s manual as a part of the appliance and provide it to other users of the appliance.
Never use the appliance, if it is not functioning correctly or if it has fallen on the fl oor and been damaged or if it has fallen into water.
In such cases take the appliance to a professional service centre to verify its safety and correct function.
This appliance must not be used by children. Keep the device out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
If leaving the extra attachment unsupervised, always switch off and disconnect the drive unit from the mains.
When handling the grater, be very careful, especially when removing it from the container, when emptying the container and while cleaning. The grater is very sharp!
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
The extra attachment is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
Do not leave the appliance in operation without supervision and supervise it for the entire time that food is being prepared!
It is not allowed to modify the surface of the appliance in any way (e.g. using
a selfadhesive wallpaper, foils, etc.)!
Use the appliance only with accessories designed for this model. The use of other accessories may present a danger for the user.
Do not turn on the appliance without any ingredients inside!
Do not insert accessories into any body cavities.
Never insert your fingers into the filling opening and do not use a fork, knife, spatula, spoon, etc. Use only the supplied pusher for this purpose.
Do not process frozen food (e.g. fruit and vegetables) or tough food (e.g. cheese)!
Do not use the attachment if the grater is damaged, if it shows visible cracks or tears or if the grater is torn.
Do not exceed the maximum continuous operating time of the appliance, see table!
Due to safety it is not possible to change the attachments while the drive unit is in operation.
Never use the extra attachment if it is not working properly, if it fell to the ground and got damaged. In such cases take the extra attachment to a specialized service to check its safety and proper function.
When assembling the extra attachment, follow the instructions for use carefully. In order to ensure proper functioning, any other way of assembling the extra attachment is not permissible!
Never remove the lid M2 from the attachment until the cutting plate has completely stopped.
The appliance do not use without the mounted lid
Before you remove the lid, let the rotating parts stop completely
Before removing the lid from the bowl or the extra attachment from the drive unit, allow the rotating parts to stop completely.
If the processed foods start to stick to the accessories (e.g. on the graters), turn off the appliance and carefully clean the accessories (e.g. with a spatula).
Only use the appliance with original accessories from the manufacturer.
Use this appliance only for the purpose for which it was designed as specifi ed in this user‘s manual. Never use the appliance for any other purpose.
WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
The manufacturer takes no responsibility for damages and injuries caused by the incorrect use of supplementary machines and accessories (e.g. ruining of foods, injury, cuts) and takes no responsibility arising from the warranty on the appliance in the case that the above safety notices were not followed.

Attention

Read and follow the safety instructions in the manual to the optional attachment and food processor or the meat mincer.
Can be used disc cutting attachment cubes only with disc grating attachment ETA002895030, gearbox ETA 002899999 and lid ETA002800810 (not included).

DESCRIPTION OF THE ACCESSORIES

P – Disc cutting attachment – cubes(pic. 1)

P1 – Graters holder
P2 – Lock button
P3 – Grater for cubes
P4 – Grater for slicing
P5 – Cleaning attachment

PREPARATION AND USE

Remove all packaging materials, take out the all accessories. Remove all adhesive foils, stickers or paper from the accessories. Before first use clean the parts that will come in contact with food using warm water with detergent, thoroughly rinse with clean water and wipe dry, if necessary allow to dry.

DISC CUTTING ATTACHMENT – CUBES (P)

Assembly (pic. 2, 3, 4, 5, 6, 7, 8, 9, 10)
Insert the grater P3 (hold it by the top plastic part) so that the protruding part on its edge fits exactly to the moulded hole on the edge of the holder P1. Four lock button P2 by slight pushing and turn (unlock). Insert the grater P4 hold it by the top plastic part, (blades facing up) insert the holder P1. Insert the grater P4 hold it by the top plastic part, (blades facing up) into holder P1 and secure it by slight pushing. Four lock button P2 by slight pushing and turn (lock up), (you will hear snapping sound). The grater must be in line with the holder. Insert the drive shaft M1 into the opening of the bowl M. Hold the holder P1 (with installed grater) at the upper plastic part and through the central opening is inserted at the drive shaft M1 put it in the respective container M so that the lugs on its edge snap into the moulded holes in the container. Put the lid M2 on bowl M so that the moulded hole on its edge fits exactly to the protruding part on the edge of the bowl. Turn the lid clockwise. Pay special attention to this operation. ATTENTION: The lid is mounted correctly when the arrow points exactly to the symbol on the handle. The lid is now secured in the correct position. Insert the cover M4 on the outlet of the bowl M until it stops. Take the assembled bowl and insert it on the gearbox N through the central opening and turn it clockwise until it stops. Pay special attention to this operation. When disassembling the grater, proceed in the opposite way.
Installation on to the multi-function head (pic. 11)
Insert the assembled slicer into the mount at an angle of approximately 45° and secure in a horizontal position by turning anticlockwise (you will hear a click). Now the slicer is ready for operation. To disassemble the entire slicer the release button, turn the slicer clockwise and pull it out of the multi-function head mount (pic. 15)
Food preparation
Use the food processing attachment to chop – cubue. You can slice carrot potato celery, horseradish, beets, parsley, cucumber, courgette, radish, onions, peppers, apple, pear, melon, pineapple, mango, sausages and foods of a similar texture. For used for further processing in the kitchen (e.g. for the preparation of soups or vegetable / fruit salads.

Attention

The plates are sharp, handle with care when fitting, removing and cleaning.
For best results when using the slicing plates, the sweeper arm should be positioned opposite the blade (pic. 7).
It is recommended to cut tough ingredients into small pieces. Do not process very hard materials ( e.g. parmesan cheese etc.).
After using a cutting plate there will always be a small amount of waste on the plate or in the food. This not a defect and the slicer cannot be subject to a complaint for this reason.

Application
Before processing, cut bigger pieces of food into cubes for the slicer M3. Place a suitable bowl under the lid M4 of the slicer to collect the processed food (pic. 12). Insert the power cord plug into a power socket. Put the appliance into operation by turning the speed dial to one of the speed levels appropriate for paring your ingredients (see table). Put individual pieces into the filling opening M3 and lightly press it down using the pusher M5. This processing method prevents the drive unit from being overloaded. The chopped food comes out of the output opening of the lid into the prepared bowl. After finishing processing, turn off the appliance press by turning the dial to position 0 / OFF.

Recommendation

Always add food intended for processing after mounting the accessories.
When processing a big amount of food, make sure it does not accumulate under the disc. Empty the bowl more often.
Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively, use the small feed tube.
Put in the ingredients one after another and equally.
Always move food in the filling hole using the pusher only, move it fluetly and to not push downwards too much (pic. 13).
We recommend a medium speed for processing soft foods such as cucumber and a max. speed for processing firmer foods such as carrots and hard cheese. Cooked food should be processed on speed MIN – 3. We don‘t recommend to slice hard-boiled eggs.
At the completion of the processing operation, raising and lowering the pusher several times may help to reduce the amount of food left on the cutting plate.
The preparation (processing) times depend on the amount, the kind and the quality of used ingredients, but as a standard they are in tens of seconds.

TABLE FOR THE USAGE OF THE ACCESSORIES

Please consider the following cooking tips as examples and as inspiration. Their purpose is not to be a complete guide, but to demonstrate the possibilities of various food preparation methods. Chose the amount of ingredients to be processed so that the maximum content of the containers marked by a line is not exceeded. A larger amount of processed ingredients must be divided into several batches and the contents of the container should be regularly inspected. We recommend that you interrupt your work from time to time and remove any food which has become stuck or clogged the attachment or is on the walls of the containers, blender and lid.

Accessories| Food| Max.amount| Time (min)| Speed| Preparation (mm)
---|---|---|---|---|---
Disc cutting
attachment –
cubes| Cucumbers| 3 pieces| 1| 4 – MAX| peeled
Apples| 1 000 g| 1| 4 – MAX| 2-Jan
Melons| 1 000 g| 1| 4 – MAX| peeled
Carrots| 1 000 g| 1| MAX| –
Potatoes| 1 000 g| 1| MAX| peeled

MAINTENANCE (fig. 14)

Pull out the power plug from the power socket before handling the device in any way!
Do not use abrasive and aggressive cleaning agents!
Slicer and including all accessories immediately after use in hot water with detergent.
The plastic parts and cutting plates be washed in a dishwasher. Handle the cutting grater with care – they are extremely sharp! The grater P3 may be easily cleaned with the attachment P5. Take care not to damage the grater mesh during cleaning. Take care that the binding surfaces and the sealing elements are functional. Some foods may stain the accessories in a certain way. This however has no effect on the operation of the appliance and is not cause for a claim or complaint regarding the appliance! After some time this staining usually goes away by itself.Never dry plastic moulded parts above a heat source ( e.g. fire stove, electric/gas stove ). Store the appliance thoroughly cleaned in a dry, dust-free location that is out of reach of children and incapacitated persons.

ENVIRONMENT

If the dimensions allow, there are marks of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specifi ed on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at a collection site.
Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!‘

TECHNICAL DATA

Weight (kg) approx. 0.3
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:

HOUSEHOLD USE ONLY.
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

NOTICE: maintain the direction for inserting the accessories!
Cutting grater with care – they are extremely sharp.

© DATE 14/9/2015
e.č. 24/2015