ET2 Contemporary Lighting E11029 Diaphane LED 9-Light Pendant Instruction Manual

June 9, 2024
ET2 Contemporary Lighting

ET2 Contemporary Lighting E11029 Diaphane LED 9-Light Pendant
ET2 Contemporary Lighting E11029 Diaphane LED 9-Light
Pendant

Before Getting Started

  • Read the instructions carefully prior to assembling the product.

  • When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.

  • Carefully remove all packaging materials and retain for future use.

  • Keep all hardware parts and packaging out of reach of small children.

  • Choose a clean, level, spacious assembly area.
    Avoid hard surfaces that may damage the product.

  • Ensure that you have all required contents for complete assembly.

  • Take care when lifting. Assemble the product in close proximity to where you intend to position the item.

  • Do not over tighten the screws and bolts as this may damage the threads.

  • Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

  • Carefully read through the instruction sheet before assembly and using the product.

  • Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
    CAUTION: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.

  • Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.

  • Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

  • On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.

  • For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.

  • Clean with soft cloth and a mild detergent.
    DO not use abrasive cleaner.

  • Periodically (every 90 days) make sure that the screws are fully tightened.

  • Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

CONTENTS

Before getting, started, ensure the package contains the following components:
CONTENTS

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

CRITICAL INSTRUCTION

Triac Dimmers

This fixture must be installed with compatible dimmer types only.
Improper wiring of fixture and/or use of incorrect dimmers will cause catastrophic failure and void the warranty.
Triac Dimmers

SCHEMATIC FOR GENERAL
REFERENCE ONLY

FOR OPTIMAL USE

Traic
For example:
Lutron DVCL-150P/DVCL-153P

DO NOT USE

0-10V or magnetic dimmer

IMPORTANT

Make sure that your dimmable LED fixture is paired with the correct dimmer type.

Must be installed by a licensed electrician with knowledge of electronic lighting systems

ET2 Contemporary Lighting

Documents / Resources

| ET2 Contemporary Lighting E11029 Diaphane LED 9-Light Pendant [pdf] Instruction Manual
E11029 Diaphane LED 9-Light Pendant, E11029, Diaphane LED 9-Light Pendant, LED 9-Light Pendant, 9-Light Pendant, Pendant
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ET2 Contemporary Lighting User Manuals

Related Manuals