NITECORE MT2A 345 Lumen LED Flashlight User Manual
- June 4, 2024
- Nitecore
Table of Contents
MT2A 345 Lumen LED Flashlight
User Manual
Features
- LED Premium CREE XP-G2 R5 LED
- Maximum output of up to 345 lumens
- High-efficiency current circuit board
- Maximum runtime of up to 50 hours
- Two rapid switching modes suit various user requirements.
- User-defined mode allows for customized brightness levels and a multitude of functions
- Intelligent memory functions
- Anti-rolling design
- Reverse polarity protection
- Toughened ultra-clear mineral glass with anti-reflective coating
- Aluminum reflector ensures a smooth and powerful beam
- Aero-grade aluminum alloy
- HA III Military grade hard anodized
- Detachable two-way anti-rolling clip
- Purpose-made rhombic knurling for better grip
- IPX8 standard waterproof (submersible to two meters)
Dimensions
Length: 155mm (6.1”)
Head Diameter: 22.56 mm (0.89”)
Tail Diameter: 21.5mm (0.85”)
Weight: 67grams (2.36oz)(without battery)
Accessories
The clip, lanyard, spare plastic cap, and spare O-ring
Battery Options
| TYPE| Nominal voltage| Compatible
---|---|---|---
Primary AA battery| AA| 1.5V| Y (Recommended)
Rechargeable AA battery| AA| 1.2V| Y (Recommended)
Primary AA Lithium battery| L91| 1.5V| Y (Recommended)
Rechargeable Li-ion battery| 14500| 3.7V| N (Banned)
Brightness & Runtime
FL STANDARD| TURBO| HIGH| MID| LOW| SOS|
STORE
---|---|---|---|---|---|---
| 345
LUMENS| 138
LUMENS| 55
LUMENS| 17
LUMENS| 345
LUMENS| 345
LUMENS
| 2h15min| 5h| 12h| 50h| |
| 152m| 81m| 43m| 14m| |
| 5800cd| 1630cd| 470cd| 52cd| |
| lm (Impact Resistant)
| IPX8, 2 m (Waterproof AND Submersible)
NOTICE
Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using two high-quality AA Ni-Mh rechargeable batteries (1.2V, 2400mAh) under laboratory conditions. The data may vary due to individual usage habits and environmental conditions.
Operation instructions
Battery Installation / Removal
As illustrated, after unscrewing the battery cap, insert/remove the battery(s)
and screw to tighten the battery cap.
Battery installation (as the picture shows)
- Unscrew the tail cap in a counter-clockwise direction.
- Insert two AA batteries with the positive pole pointing forward (toward the light head).
WARNING
Ensure batteries are inserted with the positive (+) end pointing to the head.
The MT2A will not operate with incorrectly inserted batteries.
Switching ON/OFF
Switch ON: Press the button on the tail cap until a “click” is heard.
Switch OFF: Press the button at the tail cap a second time until a “click” is
heard.
Mode Switching
The Nitecore MT2A has two modes: Turbo and user-defined. These two modes
can be changed by simply tightening and loosening the flashlight head. Turbo
provides 100% output while user-defined users contain five selectable sub-
modes.
Turbo Mode
Turbo mode is accessed when the MT2A flashlight is switched ON and the head
lightly tightened. While in this mode, momentary illumination can be achieved
by switching off the flashlight and then half-pressing and holding the switch.
Momentary illumination can be used as a flashing signal indicator or applied
to various tactical applications.
Note: After three minutes’ use of turbo mode, the flashlight will lower its
output automatically for preventing overheating, and efficiently ensure the
battery runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In
this mode, lightly and rapidly pressing the switch will cycle through
brightness and other functions in the following order: “High-Mid-Low- SOS-
Strobe”. Pressing the switch all the way down will save and memorize the
desired setting.
Tips: Make NITECORE MT2A your perfect multi-task flashlight.
NITECORE MT2A flashlights essentially have two modes: Turbo mode (100% output)
and custom mode. Turbo mode is accessed by tightening the flashlight head
while any of one of the four customizable modes (strobe, low, medium, and
high) is selected by loosening the head and rapidly pressing the on/off switch
to cycle through the modes. A given mode can be saved by simply turning off
the light while in that mode. Real-world examples include: When used as a
flashlight around the home, the head can be loosened and low level selected in
custom mode, providing long runtimes at a lower light intensity. The same
flashlight could then be taken out and used as a law-enforcement duty light,
with a user-defined mode set in the strobe, making it easy to alternate
between turbo mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of a silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective/malfunctioning
NITECORE® product can be repaired free of charge for a period of 60 months (5
years) from the date of purchase. Beyond 60 months (5 years), a limited
warranty applies, covering the cost of labor and maintenance, but not the cost
of accessories or replacement parts.
The warranty is nullified in all of the following situations:
- The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged through improper use.
- The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
※All images, text, and statements specified herein in this user manual are for reference purposes only. Should any discrepancy occurs between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMEX Innovations Co., Ltd. reserves the right to interpret and amend the content of this document at any time without prior notice.
Please find us on Facebook:
NITECORE Flashlight
SYSMEX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Unit 6355, 5/F, No. 1021 Group Road, Tianhe District, Guangzhou,
510653, Guangdong, China
Made in China
Documents / Resources
|
NITECORE MT2A 345 Lumen LED
Flashlight
[pdf] User Manual
MT2A, 345 Lumen LED Flashlight, MT2A 345 Lumen LED Flashlight, Lumen LED
Flashlight, LED Flashlight, Flashlight
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>