ATOLL ELECTRONIQUE AM300 Stereo Power Amplifier Owner’s Manual
- June 9, 2024
- ATOLL ELECTRONIQUE
Table of Contents
OWNER’S MANUAL
STEREO POWER
AMPLIFIER
AM300
AM300 Stereo Power Amplifier
You have just bought an amplifier with exceptional audiophile performance.
We really thank you for your confidence in our products. To get the best part
of your amplifier, please read carefully this manual.
YOU WILL FIND ENCLOSED
– A power amplifier AM300.
– One power lead.
– This manual with the certificate of guarantee.
ATOLL ELECTRONIQUE®
is a French Company that designs, manufactures, and commercializes all its
products.
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your device in a dry and well-ventilated place, far from a source of heat.
- Avoid putting something on your amplifier.
- Avoid any short-cut.
- Strictly respect polarity + & -, as well as the left and right connections.
- Do not plug-in two speakers in parallel on the same output.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this timelapse.
- Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- Your amplifier is equipped with a temporized switch on. A relay protects loudspeakers on the output power stage from over-voltage.
CONNECTINGS + TRIGGER
- Right speaker outputs.
- Left speaker outputs.
- ON/OFF switch and general plug-in (with protection fuse).
- Left Analog line output.
- Right Analog line output.
- Right Analog input.
- Left Analog input.| 8) Input type elector:
– Line: button pushed off.
– XLR: button pushed on. - Left XLR input.
- Right XLR input.
- Switch for MONO bridge.
- Trigger input (1).
---|---
(1)This input allows the control ON/OFF of your amplifier simultaneously to
any device with a 12 V Trigger outlet. For the system to operate, the ON/OFF
button on your AM300 must remain in the OFF position (0). If the switch is in
the ON position (I), the amplifier will work but not the Trigger function.
DETAIL OF FUNCTIONS
- Led indicator of ON/OFF switch.
- Led indicator of mono bridge: the led is ON when the Power Amp. has been activated on MONO before general switch on.
- Led indicator of XLR Input mode: the LED switches on if the button (8) on the rear of the AM is on XLR position.
BRIDGE MONO MODE
Warning: be sure that your amplifier is unplugged and that no other
appliance is plug-in during this operation.
You can transform your power amplifier into a mono bridge amplifier. Activate
the input (11) at the rear of the appliance on MONO. PRE-OUT outputs of the
preamp must be connected to the Right inputs of each Amplifier.
For each Amplifier, terminal + (red) of the Right output (1) has to be
connected to the terminal + (red) of the speaker and terminal + (red) of the
Left output (2) to the terminal – (black) of the speaker.
The wiring of the speakers will be the same while using RCA or XLR cables.
CONNECTIONS
(Configuration: 1 Preamp and 2 Power Amplifiers mono bridged).
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE, and national transpositions.
WARRANTY CONDITIONS
The guarantee is two years long from the date of purchase. We recommend you to
ask your dealer to fill the guarantee and to conserve it. The guarantee is
only available for
appliances that have been used correctly.
CLEANING
Before any cleaning, switch off your amplifier. Use a soft and dry rag to
clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind
of product containing
an abrasive agent. Never try to clean up inside the appliance.
TECHNICAL DATA
| Power Wrms / ch. / 8 Ω (230v): | 150 W |
|---|---|
| Power Wrms / ch./ 4 Ω (230v): | 280 W |
| Power in bridged mono / 8 Ω mode: | 500 W |
| Power supply: | 2×440 VA |
| Total of capacitors: | 83 300 μF |
| Number of stereo inputs: | 1 RCA + 1 XLR |
| Input impedance: | 220 kΩ |
| Sensitivity: | 1,7 V |
| Signal/Noise rate: | 100 dB |
| Distortion at 1kHz: | 0,005 % |
| Bandwidth : | 5 Hz – 200 kHz |
| Rise time: | 1,5 μs |
| Dimensions: | 440×351×103 mm |
| Weight : | 16 Kg |
WARRANTY FORM ~ MODEL AM300
To present to your dealer with the invoice when returning back the
appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Date of purchase:
Place of purchase:
Buyer signature:
Dealer Stamp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>