Kruger Matz KM0910 Solar PowerBank Owner’s Manual
- June 9, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0910 Solar PowerBank
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before first use, and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.
- Protect this device from humidity, water and other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
- Do not place heavy objects on the device.
- Use only authorized accessories.
- Do not use the device if it has been water damaged or malfunctions.
- Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
- Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
PRODUCT DESCRIPTION
- Battery level indicator
- Solar charging indicator
- Solar panel
- Power button
- Torch
- Wireless charging panel
- Charging plugs
- Powerbank charging input
- USB socket
CHARGING THE POWERBANK
- Plug the microUSB or USB-C plug to a correct socket of the powerbank. Plug the USB plug to a power adapter, and to the mains socket.
- During charging, the charging indicators are flashing. Each LED indicates 25% of charge. After finished charging, all of the indicators will glow steadily.
- After pointing the solar panel to a source of light, the solar charging indicator will glow, and the battery will start charging. However, this method is slower than charging from the mains.
- Low battery will by indicated by flashing diode of the charging indicator.
CHARGING EXTERNAL DEVICES
- Take out of the plugs from the powerbank case and connect it to your device. You can use more than one plug at the same time.
- Connect a USB cable of the external device to the USB socket of the powerbank.
TORCH
- Press the power button twice to turn the torch on or off.
- While the torch is turned on, press the power button to change the light mode (constant, SOS, flashing).
SPECIFICATION
- features
- Solar panel
- Torch function
- Wireless charging
- Built-in output charging plugs
- Automatic detection of mobile devices
- Short-circuit, overcurrent, overcharge and deep discharge protection
Technical data
- Input sockets: USB-C, microUSB
- Output plugs: USB, microUSB, USB-C, Lightning
- Battery type: Li-Poly
- Battery capacity: 10000 mAh
- Input voltage: 5 V
- Input current: 2000 mA
- Output voltage: 5 V
- Output current: 2000 mA
- Wireless charging power: max. 5 W
- Material: ABS
- Dimensions: 165 x 76 x 23 mm
- Weight: 301 g
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>