KOHLER K-26341 Three-Port Recessed Mechanical Thermostatic Valve Instruction Manual
- June 9, 2024
- Kohler
Table of Contents
KOHLER K-26341 Three-Port Recessed Mechanical Thermostatic Valve
Safety Instruction
WARNING: Risk of scalding. High water temperature can cause severe burns. Set the valve water temperature at or below 120°F (49°C). Refer to the temperature adjustment instructions for the valve. Follow all local plumbing and building codes.
Tools Required
Package Content
- 1A. Backer Board
- 1B. Sealant Tape
Installation Instruction
-
2A. Maximum distance to the finished wall surface.
-
2B. Minimum distance to the finished wall surface.
-
3A. Install a backer board between the studs.
-
5A. Connect the water supplies.
-
6A. To invert the hot and cold supply lines, swap the cartridges.
-
7A. Connect piping for the shower fittings only to the top or bottom port.
-
9A. Check all connections for leaks.
-
10A. Complete the finished wall.
Need help? Contact our Customer Care Center.
- • USA/Canada: 1-800-4KOHLER (1-800-456-4537), Mexico: 001-800-456-4537
- For service parts information, visit kohler.com/serviceparts.
- For care and cleaning information, visit kohler.com/clean.
This product is covered under the KOHLER ® Faucet Lifetime Limited
Warranty, found at kohler.com/warranty. For a
hardcopy of warranty terms, contact the Customer Care Center.
References
- How to Use KOHLER Cleaning Products | KOHLER
- Kohler Warranty Info: Product Limited or Warranty | KOHLER