sengled Smart Wi-Fi LED CLASSIC User Manual
- June 9, 2024
- Sengled
Table of Contents
sengled Smart Wi-Fi LED CLASSIC
Introduction
Sengled Smart Wi-Fi Classic LED bulbs offer an easy solution to having app- controllable smart lighting in your home. These bulbs enable you to control your lights in multiple ways—on/off, dimming, schedules, etc.— through the Sengled Home app on your phones or through partner programs like Amazon Alexa or Google Assistant.
Important Safety Information
- Before installing the Sengled Smart Wi-Fi Classic LED bulbs, please read and follow all precautions, including:
- Turn off power before installation or removal. Discontinue use if damaged.
- Risk of electric shock. Do not attempt to disassemble bulb.
- Not suitable for use with standard wall dimmers.
- Not suitable for completely enclosed fixtures.
- Suitable for use in operating environment between -4°F and 104°F (-20°C and 40°C).
- Not for use in emergency lighting.
- Indoor use only.
Wireless Specification
- Wireless Frequency Range: 2.4GHz (2412MHz ~ 2472MHz, IEEE 802.11b/g/n)
- Operating Channels Wi-Fi: 1 – 13
- Maximum Transmitted Output Power: +18dBm
Installation Instructions
The following instructions are applicable to adding your Smart Wi-Fi Classic LED bulb through the Sengled Home app. If you would like to use third party smart home services, such as Amazon Alexa, Google Assistant, or would like to find our latest list of supported third-party integrations, please refer to support.sengled.com Ensure your mobile device is connected to the same Wi-Fi router that you would like to setup the smart Wi-Fi Classic LED using a 2.4GHz connection.
- Download the latest version of the Sengled Home App from the Apple App Store or Google Play Store.
- Register and sign in to your Sengled account in the app.
- Open the Sengled Home app. Go to Devices, select the + sign, and choose Smart Wi-Fi LEDs. Follow in-app instructions to finish setup.
- Ensure your Sengled Home app can discover the bulbs. If the app unsuccessfully discovers the bulbs, please refer to the next section “Reset Instructions” for how to reset your bulb before attempting to add it back in. Congratulations on successfully installing your\ Smart Wi-Fi Classic LED bulbs!
Reset Instructions
To reset your Smart Wi-Fi Classic LED bulb, ensure that the bulb is on and then quickly turn the bulb off and on at least 5 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash three times. If it does not flash three times, you will have to try again. Once successfully reset, please try to pair it in your Sengled Home app again.
Operation
The following section outlines some of the popular operational modes of the Sengled Smart Wi-Fi Classic
LED bulbs.
Applicable to all Smart Wi-Fi Classic LED bulbs:
On / Off
Smart Wi-Fi Classic LED bulbs can be controlled through a variety of means:
- Manually via a wall switch
- Through Sengled Home app
- Through partner programs like Amazon Alexa or Google Assistant etc.
Dimming
Smart Wi-Fi Classic LED bulbs can be dimmed through the following:
- Through Sengled Home app
- Through partner programs like Amazon Alexa or Google Assistant etc.
Scheduling
Schedules can be created with Sengled Home app. Check the in-app how-to pages
through “Settings” for the following two operations.
Voice Control
- Set up Amazon Alexa by adding
- Sengled Home Skill.
- Set up Google Assistant by adding
- Sengled Home Service.
Away Lighting with Alexa Guard
Alexa can automatically turn your bulbs on and off to make it look like someone’s home while you’re away. Just set up Guard in the Alexa app and then tell Alexa you’re leaving to set Guard to Away mode. If you have Sengled Smart Wi-Fi Classic LED Multicolor bulbs, the following operations are also available
Tuning Whites
Adjust whites via the white palette in the Sengled Home app, or with voice
control.
Changing Colors
Change between 16 million colors using the color palette in the Sengled Home
app, or with voice control.
Frequently Asked Questions
Are Sengled Smart LEDs suitable for use with wall dimmers?
No, Sengled Smart LEDs are not suitable for use with wall dimmers, or other
variable power devices. Dimming is supported via Sengled Home app orcompatible
smart devices only.
Sengled Smart Wi-Fi Classic LED bulbs appears offline or unresponsive, what should I do?
- Please check the light switch and make sure the power is On.
- Power cycle the Wi-Fi Classic LED bulb, wait 1 minute and check the status.
- Please check your home Wi-Fi network and internet connection is working properly.
- Try moving the bulbs closer to the Wi-Fi router.
- If all else fails, try to restart your Wi-Fi router.
Can different types of Sengled smart bulbs be used simultaneously?
Sengled Smart Wi-Fi Classic LED bulbs can be used in conjunction with their
Zigbee counterparts, the Sengled Smart LED bulbs line, when creating scenes
and schedules within your home. Please refer to sengled.com for more
information.
Could not connect to the Wi-Fi router or third-party services?
The firewall or port on your Wi-Fi router may be blocked and could prevent the
Sengled Wi-Fi Classic LED bulb from connecting to the Sengled cloud. A Sengled
Home account is required to access third-party services that utilize the
Sengled cloud. Please open Port 1883 and 8883 on your Wi-Fi router to ensure
connectivity. If your router is preventing access, you will need to enable
access to these ports. If you need help with changing your firewall settings:
For routers provided by your internet service provider, please contact your
internet service provider. For a router you own, please contact the
manufacturer of the router.
Limited Warranty
2-year limited warranty from original purchase date. Sengled restrict warranty
service for smart home device to the country where Sengled or its authorized
retailor originally sold the device. To learn more about the Limited Warranty
for Sengled products, please visit
www.sengled.com/warranty
Support
- If you encounter any issues, please reach out to your local Sengled Support team.
- Visit the following website for web support: https://support.sengled.com/
- Send emails to: Support@sengled.zendesk.com (USA)
- Dial Customer Support Line 1-877-401-5990
- 10:00am-8:00 pm CST on Mon-Fri
- 11:00am-8:00 pm CST on Sat
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>