NHL 1-1-34948 Rush Hover Hockey Game Table User Guide
- June 15, 2024
- NHL
Table of Contents
ASSEMBLY VIDEO
@NHL
RUSH HOVER HOCKEY
CAUTION: ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 8 years of age. As with all electric
products, precautions should be observed during handling and use to prevent
electric shock.
INPUT: 120VAC 60Hz
OUTPUT: 12V DC 500mA
WARNING:
Sharp point and sharp edge.
Adult assembly required.
ONE OR MORE ADULTS REQUIRED FOR ASSEMBLY
Model 1-1 34948 (915)
www.eastpointsports.com consumerservice@eastpointsports.com 973-585-4747 Monday to Friday (9am to 5pm EST)
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions – All the safety and operating instructions
should be read carefully before this Hover Hockey table can be operated or
played.
2. Caution – This is not a toy and is intended for use by or under the
supervision of adults. Adults should review safety guidelines with children to
avoid possible risk of electric shock or other injuries.
3. Power Sources – This Hover Hockey game should be operated only from
100-240V A.C., 50/60 cycle current as indicated on the identification label.
If you are not sure of the type of power supply to your home, consult your
appliance dealer or local power company.
4. Power Cord Protection – Power cord should be routed so that it is not
likely to be walked on or pinched by items placed upon or against it. Pay
particular attention to cords at plugs, convenience receptacles, and the point
of exit from the game.
5. Overloading – Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
6. Object and Liquid Entry – Never push objects of any kind into this
game through openings as they may touch dangerous voltage points or short-out
parts which could result in a fire or electric shock. Never spill liquid of
any kind on the game. If cleaning the surface, follow the recommended
manufacturer instructions or call technical support for guidance.
7. Ventilation – Openings in the game are provided for the exhaust air
to create a cushion/floating effect The openings on the air blower are for the
intake air. Keep clear of the air blower during operation. Do not allow hand,
hair, or any other objects near the intake openings. To ensure reliable
operation of the game and protect it from overheating, these openings must not
be blocked or covered.
8. Damage Requiring Service – Unplug the game from the wall
outlet/receptacle. Do not attempt to service the blower yourself as while
opening and/or removing covers may expose you/others to dangerous voltage or
other hazards. Refer servicing to qualified service personnel under the
following conditions:
a. When the power supply cord is damaged.
b. If liquid has spilled, or objects have fallen into the blower.
c. When the air blower exhibits a distinct change in performance – i.e.
abnormal noise, too much/too little air flow, this indicates a need for
service
9. Grounding or Polarization – This game is equipped with a polarized
alternating current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. DO NOT defeat the safety purpose
of the polarized plug.
10. CAUTION – ELECTRICALLY OPERATED PRODUCT – Not recommended for
children under 8 years of age. As with all electrical products, precautions
should be observed during handling and use to reduce the risk of electric
shock.
11. We recommend – that the game be periodically examined for conditions
that may result in the risk of fire, electrical shock, or injury to persons.
In the event such conditions exist the game should not be used until properly
repaired.
12. Storage Conditions – This product is made from wood based components
and is sensitive to extreme temperatures and moisture /humidity. Subject to
these conditions will effect game play, cosmetics and longevity.
Save These INSTRUCTIONS
Warning: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
TOOLS
Required
- Phillips Head Screwdriver – Not Included
- Allen Wrench – Included
Recommended (Not required):
-
Electric Screwdriver or Power Driver
CAUTION: DO NOT OVER TIGHTEN. If using, please make sure that the tool is set to a very low torque to prevent damage to the product. -
Level
-
-
PARTS IDENTIFIER
- Part #
- Instructions Parts ID #
- Part Name
- Part Image
- Part Quantity
PARTS IDENTIFIER
(1) Main Cabinet
NOT REPLACEABLE x 1
| (2) Leg – Left
34948-02915 x 2
| (3) Leg – Right
34948-03915 x 2
| (4) Leg Panel – End
34948-04915 x 2
---|---|---|---
(5) Leg Panel – Side
34948-05915 x 2
| (6) Leg Leveler
34948-06915 x 4
| (7) Goal Box with Wire
34948-07915 x 2
| (8) LED Scorer
34948-08915 x 1
(9) Adapter
34948-09915 x 1
| (10) Corner Cap
34948-10915 x 4
PRE-INSTALLED
| (11) Blower 0.5A
34948-11915 x 1
PRE-INSTALLED
| (12) Goal Wire Velcro
34948-12915 x 1
PRE-INSTALLED
(60) Bolt
34948-60915 x12
| (61) Screw-Scorer
34948-61915 x 2
| (62) Screw
34948-62915 x22
| (63) Washer
34948-63915 x 12
(64) Allen Key
34948-64915 x 1
| (80) Pusher
34948-80915 x 2
| (81) Puck
34948-81915 x 2
| (82) Felt Pad
34948-82915 x 2
PRE-INSTALLED
BEFORE BUILDING – Please inspect and lay out all your parts.
Your Table Game Playfield is NOT replaceable. Any damage that exists to your
playfield is NOT repairable under warranty. If your playfield is damaged, the
entire game must be returned to the original place of purchase for an
exchange. Before you begin assembly be sure to lay out all your parts on a
non-marring surface. If using the box, be sure to remove all staples to
prevent damage.
1
-
Insert the Goal Box Wire through the end apron.
Then screw in the Goal Box. -
DO NOT overtighten Screws.
2
- Insert both Goal Box Wires through support frame to side apron as shown.
- Tie up the wire with the Goal Wire Velcro as shown.
Repeat for the other one.
3
! DO NOT overtighten Bolts.
Attach the Leg and fasten with Bolts.
Repeat for all legs.
4
Attach the Leg Panel – Side and fasten with Screws.
Repeat for both sides.
! DO NOT overtighten Screws.
5
Attach the Leg Panel – End and fasten with Screws.
Repeat for both sides.
! DO NOT overtighten Screws.
6
- Screw in all 4 Leg Levelers.
7
! Using at least 2 STRONG ADULTS, pick up & flip table over.
Lift table & turn it in the air.
To avoid damage, DO NOT lean table on its Legs.
Place on all 4 Leg Levelers on the floor at once.
DO NOT lean table on Legs!
8
- Insert the DC plug of the Adapter into the Blower.
9
– Unscrew and remove battery door.
– Insert 2 AAA Batteries (Batteries not included).
– Return battery door and insert Screw.
10
-
Screw the LED Scorer to the side apron of the table.
Then Connect both Coal Box Wires to the LED Scorer as shown. -
DO NOT overtighten Screws.
! CAUTION:
DO NOT SPRAMEANER DIRECTLY TO TABLE SURFACE AS IT CAN PLUG UP THE HOLES.
MAKE SURE FAN /AIR BLOWER IS POWERED ON TO PREVENT ANY DUST OR DEBRIS FROM
PLUGGING UP THE HOLES.
CLEAN TABLE.
Turn fan on.
Use a glass cleaner and spray it directly to a doth. Use the damp cloth to
wipe the table surface followed by a dry doth.
Use a multi-surface furniture polish and spray it directly to a cloth. Use the
doth to polish the surface. This will help to make your surface more slick.
Use a dry doth to wipe away any excess residue.
SCORER OPERATION
- POWER
- RESET
- PLAYER 2
- PLAYER 1
POWER
Press the Power button to turn the scoreboard ON/OFF.
RESET
After the game is over, press the RESET button to RESET the scoreboard.
Press and hold the RESET button for 3 seconds to RESET the scorer at any time.
PLAYER 1/ PLAYER 2
The first player to 10 wins.
SCHEMATIC DIAGRAM
ELECTRIC RATING: INPUT -120V AC -60Hz OUTPUT – 12V DC 500mA MOTOR: DC 12V/0.5A
- DC MOTOR
- ADAPTER
- POLARIZED PLUG
- DC PLUG
ELECTRONIC CONNECTIONS
ELECTRONIC CONNECTIONS
FCC IDENTIFIER :
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning! Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
BATTERY WARNING
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-
mh, etc.) batteries.
DO NOT dispose of batteries in fire, batteries may explode or leak.
MADE IN CHINA
Limited Warranty
As described in and as limited by this Limited Warranty, EastPoint Sports Ltd., LLC (the “Company”) warrants this Product to be free from defects in workmanship and materials for a period of 90 days from the date of original purchase. The term defects shall mean any imperfections that impair the use of the product. The Company reserves the right to request confirmation of Proof of Purchase when requesting parts or service in order to confirm that this Product is within its warranty period and terms.
What is Covered: Except as provided herein, this Limited Warranty covers all defects in materials and workmanship. This Limited Warranty is void if the Product is:
- Damaged through improper usage or storage, negligence, misuse, abuse, transportation damage, acts of nature, or accident (including failure to follow the instructions supplied with the product).
- Used in commercial applications, rentals or a commercial environment.
- Modified or repaired by anyone not authorized by the Company.
What is Not Covered:
The Limited Warranty does not cover:
- Expendable items such as cosmetic parts, game playing accessories, and any other items that may show signs of wear due to normal usage.
- Any transportation/delivery/installation costs incurred by the Consumer (either home from the original place of purchase or back to the original place of purchase).
- Items not purchased from an authorized retailer (ie: this warranty does not apply to so-called “grey market” goods (those goods purchased from a third party)).
What the Company Will Pay For:
- If any part or component of the Product which is covered by this Limited Warranty is found by the Company to be defective, the Company will provide replacement parts without charge. The Company’s obligation to repair or replace the Product or any portion of thereof, shall be limited to the original purchase price of the product.
- If during the Limited Warranty period, the product is found to be defective, the Company will, at the Company’s option, repair, replace or make remuneration for the Product (either the same or equivalent value) without charge.
How to Obtain Warranty Service: In order to enforce your rights under this Limited Warranty, you must follow these procedures:
- You must return the ORIGINAL COPY OF YOUR SALES RECEIPT to the Company showing a purchase from an authorized retailer.
- You must call the Company’s Consumer Service Department at 1-973-585-4747 on Monday through Friday between the hours of 9:00 A.M. and 5:00 P.M. (EST) to notify the Company of the nature of the problem. At the Company’s option, replacement parts or a new Product (either the same or equivalent value) will be sent to you at no charge.
- If you are instructed to return the Product to the Company for servicing, you are responsible for shipping the Product at your expense, to the address designated by the Company in packaging that will protect against further damage.
- You must also include your name, address, daytime telephone number, Product model number, and a description of the problem.
- The Company will pay for any shipping charges to return the repaired or replaced Product to you.
THIS LIMITED WARRANTY IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE
PRODUCT, PURCHASING FROM AN AUTHORIZED RETAILER, AND IS VALID ONLY IN THE
UNITED STATES AND CANADA.
THE COMPANY’S LIABILITY IS LIMITED TO THE REPAIR, REPLACEMENT, OR
REMUNERATION, AT ITS OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE
ANY LIABILITY FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND.
THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY
AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR DO NOT ALLOW
FOR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. TO THAT EXTENT, THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This Limited Warranty gives you specific legal rights, but you may also have
other rights that vary from state to state.
If you have questions regarding this Limited Warranty or the operation of the
Product, you may call or write us.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY AN ORIGINAL COPY OF THE SALES RECEIPT/PROOF OF PURCHASE. REPORT ANY DEFECTS TO: EastPoint Sports, 20 Commerce Boulevard, Succasunna, NJ 07876, 1-973-585-4747
PRINTED IN CHINA
185.190
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>