Harbor Breeze RS429P-K10C-BK-1 10-Lumen Black Solar LED Outdoor Path Light User Manual
- June 8, 2024
- Harbor Breeze
Table of Contents
Harbor Breeze RS429P-K10C-BK-1 10-Lumen Black Solar LED Outdoor Path Light
INTRODUCTION
Thank you for purchasing this HARBOR BREEZE product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-888-251-1003, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 3 minutes
TOOLS REQUIRED
No Tools Required for Assembly.
FEELING CONFIDENT
Visit www.lowes.com for more information
TROUBLESHOOTING
PROBLEM
| POSSIBLE CAUSE|
CORRECTIVE ACTION
---|---|---
Solar light does not turn on at night or its nightly run time is shorter.|
- Battery is not fully charged.
- The solar light is installed close to other light sources, which may keep the solar light from turning on at night automatically
- The batteries are reaching the end of their useful life.
|
- Make sure the solar light is located in an area where it can receive the maximum amount of full, direct sunlight everyday. Keeping the solar panel clean is equally important to ensure maximum charging performance.
- Relocate the fixture or eliminate other light sources.
- Replace old batteries with new rechargeable batteries.
CARE AND MAINTENANCE
-
CHARGING THE BATTERIES
For optimum performance, it is best to install the solar light in full sunlight and charge for 10-12 hours. Allow the light to run at least 8-12 complete charging and discharging cycles to reach batteries’ maximum capacity. -
REPLACING THE BATTERIES
Remove the battery compartment cover and replace the old batteries with new 1.2V 600mAh rechargeable Ni-CD AA battery. A minimum capacity of 600mAh is required. Replace the battery compartment cover. -
CAUTION
Do not attempt to replace LEDs. -
WINTER TIPS
Keep debris and snow off the solar panel to allow the batteries to recharge. If lights have been covered by snow for a long time, allow batteries to recharge in full, direct sunlight for at least 10-12 hours so that they maintain maximum capacity
WARRANTY
The manufacturer warrants this product to be free of defects in material and workmanship for one (1) year from date of original purchase. The manufacturer agrees to repair or replace the defective product at its own option. This warranty does not include any costs associated with the physical installation, removal or return of the product. This warranty only extends to the original purchaser and is not transferable or assignable to subsequent purchasers. No warranty work will be provided under this warranty without reasonable proof of purchase. Please call us at 1-888-251-1003 to receive your warranty service. This warranty does not extend to the following: (1) LED bulbs or batteries; (2) defects caused by and resulting from misuse, neglect, accident or improper operation, maintenance and storage, disassembly of parts; (3) surface scratches or weathering as this is considered normal wear; (4) any other failure not related to defects in materials and workmanship. There are no other warranties except those stated above. Some states do not allow the exclusion or limitation of special or consequential damages or allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
- DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
- Do not mix alkaline, standard (carbon zinc), or rechargeable (lithium, nimh, etc) batteries.
- Ensure the battery is installed correctly with regard to polarity (+ and -).
- The batteries are reaching the end of their useful life. Replace old batteries with new rechargeable batteries.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>