Harbor Breeze QPP55A-M60-WH-1 60-Lumen 2.5-Watt White Low Voltage Low Voltage User Manual
- June 8, 2024
- Harbor Breeze
Table of Contents
ITEM # 4108937
LED POST CAP LIGHT
QPP55a-M60-WH-1
QPP55A-M60-WH-1 60-Lumen 2.5-Watt White Low Voltage Low Voltage
HARBOR BREEZE and logo design are trademarks or registered trademarks of LF, LLC.AII rights reserved.
Thank you for purchasing this HARBOR BREEZE product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
1-888-251-1003, 8 a.m. – 8 p.m.,
EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| The lights do not turn on. | 1. There is no power. |
2. There is a disconnection or break in
the wire.
3. The transformer setting is incorrect.| 1. Check the outlet and ensure
that a breaker or GFCI circuit has not been tripped.
2. Follow the wires form the fixture and ensure a continuous
connected path back to the transformer.
3. Check the settings on the transformer.
The lights flicker.| There is a loose wire connector to the
fixture.| Tighten the wire connector and ensure the metal contacts pierce the
insulation on the low voltage cable from the transformer.
The lights flicker (all fixtures).| There is a loose connection at the
transformer.| Unplug the transformer from the outlet and visually inspect the
positive and negative connecting posts. Each wire should be securely
screwed in and not in contact with any other.
CARE AND MAINTENANCE
- To clean the fixture use a dry or slightly dampened clean cloth.
- DO NOT use any cleaners with chemicals, solvents or harsh abrasives as damage to the fixture may occur.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes
TOOLS REQUIRED (not included) :
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
Printed in China Impreso en China
WARRANTY
The manufacturer warrants this product to be free of defects in material and workmanship for five (5) year from date of original purchase. The manufacturer agrees to repair or replace the defective product at its own option. This warranty does not include any costs associated with the physical installation, removal or return of the product. This warranty only extends to the original purchaser and is not transferable or assignable to subsequent purchasers. No warranty work will be provided under this warranty without reasonable proof of purchase. Please call us at 1-888-251-1003 to receive your warranty service. This warranty does not extend to the following: (1) defects caused by and resulting from misuse, neglect, accident or improper operation, maintenance and storage, disassembly of parts; (2) surface scratches or weathering as this is considered normal wear; (3) any other failure not related to defects in materials and workmanship. There are no other warranties except those stated above. Some states do not allow the exclusion or limitation of special or consequential damages or allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
**** SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION
- The wire connector contacts have sharp edges for piercing the main low voltage cable. To avoid injury, do not touch the metal contacts.
- The wire from low voltage power units should be 12-16 AWG type underground low energy circuit cable.
- Before attempting to clean the fixture, disconnect the power to the fixture by turning the low voltage transformer off.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
NSTALLATION OVERVIEW
AS21505
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>