LucidSound LS50X Wireless Gaming Headset with Bluetooth User Guide
- June 8, 2024
- LucidSound
Table of Contents
LucidSound LS50X Wireless Gaming Headset with Bluetooth
SETUP
XBOX ONE
To complete setup for Xbox One and enable surround sound go to:
The LS50 headset has two modes for volume control:
Gaming Control Mode
Left volume wheel controls the level of the incoming audio from the dongle
(connected to your Xbox One).
Bluetooth Control Mode
Left volume wheel controls the volume level of the audiocoming from your
Bluetooth device.
To switch between the two control modes, press and hold the left earcup button
for 1 second.
HEADSET
ACCESSORIES
MICROPHONE
CHARGING
MOBILE SETUP
Press and hold the EQ/BT button for 4 seconds to enter pairing mode
Search for Bluetooth devices on mobile phone and choose “LucidSound LS50”
- Dongle Model No: LS50XTX FCC ID: 2AGZW06430 IC ID: 21203-06430
- Headset Model No: LS50RX FCC ID: 2AGZW03595 IC ID: 21203-03595
RF Frequency: 2.40335 GHz to 2.47935 GHz
Output Power: TX = 5.83 dBm RX = 3.58 dBm
Manufacturer: LucidSound, Inc.
Importer: Information can be found at lucidsound.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC SAR exposure limits set forth for an uncontrolled environment The equipment can be used in close proximity to the human body without any restrictions.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with FCC exposure limits set forth for an uncontrolled
environment
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard.
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0 cm
between the radiator and your body.
Warranty
LucidSound, Inc. warrants this product to be free from defects in materials
and workmanship for the warranty period. This non-trans-
ferable, 1-year limited warranty is only to you, the first end-user purchaser.
If a defect covered by this warranty occurs AND you
provide proof of purchase, LucidSound, Inc., at its option, will repair or
replace the product at no charge (excluding shipping).
The LucidSound, Inc., 1-year limited warranty is available to customers
worldwide. Your sole and exclusive remedy is repair or replacement of your
LucidSound product. In no event shall LucidSound’s liability exceed the
original purchase price of the product.
This warranty does not apply to:
- normal wear and tear or abusive use;
- industrial, professional or commercial use;
- if the product has been tampered with or modified.
This non-transferable warranty is only valid in the region/country in which
the headset
was originally purchased.
To receive warranty service, please contact us at:
lucidsound.com
(toll free) 888-661-4469
1-760-579-6969
©2019 Lucid Sound, Inc. 5939 Darwin Ct., Suite 100, Carlsbad, CA 92008 U.S.A.
Microsoft, Xbox, Xbox “Sphere” Design, Xbox One, and Windows are trademarks of
the Microsoft group of companies. All other trademarks are the property of
their respective owners.
The shape and design of this product are a trade dress of Lucid Sound, Inc.,
its subsidiaries and affiliates. All rights reserved. All other product names
and images are trademarks or registered trademarks of their respective owners.
Made in China. Product features, appearance and specifications may be subject
to change without notice. Please retain this information for future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>