LucidSound LS100X Wireless Gaming Headset User Guide
- June 5, 2024
- LucidSound
Table of Contents
LS100X
WIRELESS
GAMING HEADSET
NEW COVER
PHOTO TO COME
CASQUE DE JEU SANS FIL
USER GUIDE
GUIDE D’UTILISATION
Accessories
Boom Mic| Microphone Port Cover| USB C Charging Cable|
Wireless USB Adapter
---|---|---|---
| | |
Microphone
Setup: Wireless USB Adapter
!!! IMPORTANT !!!
To complete setup for Xbox and enable Surround Sound go to:
https://www.lucidsound.com/support
Setup: Bluetooth
Press and hold EQ/BT for 3 seconds.| Select “LucidSound LS100X” from your device’s Bluetooth settings.
Headset: Left Side
Headset: Right Side
Wireless USB Adapter
Charging
NOTE: Remember to charge your headset at least once every 30 – 60 days
when either the low battery indicator is active, or the battery is depleted so
that the battery retains its ability to charge. Remember to fully charge the
headset at least once a year if the headset will not be used for an extended
period of time so that the battery retains its ability to charge. Battery
capacity will gradually reduce over time with repeated charging
Support
TROUBLESHOOTING
For the latest FAQs , visit LucidSound.com/support
Why do I hear static or no sound?
Ensure the Wireless Headset is paired with the console/device by referencing
the LED indicators. Make sure the Volume Wheel is not set to a minimum. On
Xbox make sure that the Game/Chat Balance Wheel is not maxed out to either
Game or Chat audio. Check console/ device menu settings to ensure sound is
being output to the headset.
Why can’t my friends hear me?
Make sure that the Boom Mic is securely attached to the headset, and that the
Boom Mic LED is not on. Check console/device menu settings to ensure the
headset microphone is selected for input.
COMPLIANCE IDENTIFICATION
TRANSMITTER
Model: XBHS0007 TX
FCC ID: YFK-LS100XAB
IC: 9246A-LS100XAB
HEADSET
Model No.: XBHS0007-01
FCC ID: YFK-LS100AA
IC: 9246A-LS100AA
RF FREQUENCY: 2.402 GHz to 2.480 GHz
OUTPUT POWER: TX=7dBm; RX=9dBm
INPUT POWER: 3.7V, 850mAh
MANUFACTURER: ACCO Brands USA, LLC
4 Corporate Way, Lake Zurich, Illinois
60047 United States
ACCOBrands.com |
LucidSound.com
Made in China
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Caution : To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment.
IC SAR COMPLIANCE
This equipment could be installed and operated with a minimum distance of 0cm
between the radiator and your body. End-user must follow the specific
operating instructions to satisfying- ing RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. The portable device is designed to meet the
requirements for exposure to radio waves established by the ISED. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The
highest SAR value reported under this standard during the product
certification for use when properly worn on the body/ head.
HEARING DAMAGE RISK
** High sound pressure! Do not listen to high volumes for long periods.
BATTERY WARNING**
Don’t attempt to replace the rechargeable battery yourself- you may damage the
battery, which could cause overheating, fire, and injury.
The Lithium-ion battery in your device should be serviced or recycled by
PowerA or an authorized provider and must be recycled or disposed of
separately from household waste.
Dispose of batteries according to your local environmental laws and
guidelines.
Don’t use or leave the product containing rechargeable batteries exposed to
very high or very low temperature (e.g. at strong direct sunlight or in a
vehicle in extremely hot or extremely cold weather), or in an environment with
extremely low air pressure can result in an explosion, fire, or the leakage of
flammable liquid or gas.
Don’t use this product in a location where static electricity is rich,
otherwise, the internal safety devices may be damaged, causing a harmful
situation.
In case the electrolyte gets into the eyes due to the leakage of the battery,
do not rub your eyes! Rinse eyes with clean running water and seek medical
attention immediately. Otherwise, it may injure the eyes or cause a loss of
sight. If the battery gives off an odor, generates heat, or in any way appears
abnormal during use, recharging, or storage, immediately remove it from the
battery charger and place it in safe spill-proof storage, made of glass or
metal. Be aware that discarded batteries may cause a fire. Do not heat this
product or throw it into the fire, or mechanically crush or cut the battery.
DECLARATION OF CONFORMITY
Trade Name: LucidSound
Model No.: XBHS0007-01
US Company Name: ACCO Brands USA, LLC
Address: 4 Corporate Way, Lake Zurich, Illinois 60047 United States
Internet contact information:
ACCOBrands.com |
LucidSound.com
Hereby, ACCO Brands USA, LLC at 4
Corporate Way, Lake Zurich, Illinois 60047USA, is marketing this device under
the brand name LucidSound and declares that this wireless headset is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following internet address:
LucidSound.com/EUDOC
REGIONAL COMPLIANCE SYMBOLS
More information is available via web-search of each symbol name.
The WEEE (Waste of electrical and electronic equipment) symbol requires
battery disposal outside of other household waste per local regulations.
Contact your city office, waste disposal service, or retailer for guidance.
The CE mark is a declaration from the manufacturer that the product meets
applicable European Directives and Regulations for health, safety, and
environmental protection.
The UKCA (UK Conformity Assessment) mark is a declaration from the
manufacturer that the product meets applicable UK Regulations for health,
safety, and environmental protection.
The Regulatory Compliance Mark is a visible indication of a product’s
compliance with all applicable ACMA (Australian Communications and Media
Authority) regulatory arrangements, including all technical and record-keeping
requirements regarding electrical safety and/or electromagnetic compatibility
(EMC).
RoHS
This product has been certified as RoHS compliant in accordance with Directive
2011/65/CE.
WARRANTY
The USA and worldwide: 1 -Year limited warranty
Europe: 2-Year limited warranty Visit
LucidSound.com/Warranty for details.
Australian Warranty Statement:
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a 1-year replacement warranty in which you
are entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
What you must do: If a defect has appeared within 90 days from the date of
purchase, the product may be returned to the retailer for a replacement. If a
defect has appeared after 90 days from the date of purchase, you must initiate
a repair by following the online repair process at
www.LucidSound.com.au. Once all details are
completed, you will receive a return authorization number. Then, label and
ship your LucidSound headset – including the return authorization (RA) number,
and freight prepaid, to LucidSound’s authorized repair center.
References
- ACCO Brands
- bluemouth.com.au
- Gaming Headsets for Xbox, PlayStation, PC, and Mobile | LucidSound
- lucidsound.com.au
- EU Declaration of Conformity | LucidSound
- Support | LucidSound
- Warranty | LucidSound
- Support | LucidSound