SOUNDVISION SPA-1002P Directional Antenna for Wireless Microphone User Manual
- June 4, 2024
- SOUNDVISION
Table of Contents
SPA-1002P Directional Antenna for Wireless Microphone
User Manual
CAUTIONS:
- The antenna connector 2 has a 9V DC output Be cautious of any parts to the antenna or internal antenna cables. To avoid an electric shortage, do not let it touches the case.
- It will not function properly if the DC voltage falls below 12V. If it exceeds 15V it will damage internal circuit components.
- When using antenna cables and remote antennas, please use standard 50-impedance coaxial cables. The longer the cable, the more loss of RF signal. Do not exceed 6 meters in length. The larger the cable diameter, the minimized loss of the signal. If a longer antenna cable is needed, use a larger diameter cable to reduce the loss of signal through the attenuation in the cabling.
- Use 50-impedance coaxial cables between the receiver and the antenna divider system. Best to keep the distance as short as possible. (It is recommended to use the included parts)
SPA- 1000A ACTIVE DIRECTIONAL ANTENNA
INTRODUCTION
SOUND VISION SPA-1000A Active directional antenna for wireless microphones.
These antennas both improve the reception of Wireless transmitter signals and
minimize interference receivers with appropriate installed placement. Supports
a professional TNC connector The antenna has waterproof construction and can
be used for indoor and outdoor applications.
FEATURES
- The antenna is suitable for the 470-1000MHz frequency range.
- Supports a professional TNC connector.
- Improved wireless reception (10dB) of active directional antenna gain.
- Reduced interference.
- Improved RF signal-to-noise ratio.
- includes 5 meters of cable.
SPA- 1002P ANTENNA/POWER DISTRIBUTION SYSTEM
FEATURES
- The antenna is suitable for the 450 -1000MHz frequency range.
- The multi-channel receiving system eliminates spurious interference in multiple system usage.
- Identifies and assigns optimal frequencies to receiver/transmitter pairs
- Two input sockets, made especially for the receiver used in long distances, can compensate for the loss of signal caused by connecting to the receiver with the same cable.
THE INCLUDED ACCESSORIES:
-
SPA-1000A:
TNC-TNC signal cable 5m 2 pcs.
SPA-1002P:
TNC-TNC signal cable: 50cm 8 pcs -
Power cable: 50cm 4 pcs
-
Adapter 1 pc.
-
pcs. 4. User Manual 1 Book.
DESCRIPTION AND FUNCTION
- Power On/Off Switch: When power-on, the light illuminates.
- Antenna AIR Input Connectors: To install antennas or antenna extensions. It provides DC out of 9V/100mA.
- Antenna Distribution Output The distributed signal outputs for multiple systems.
- DC Power Input Jack: To connect DC 12V from the DC adapter. 5. DC Output
INSTALLATION
- Use the included antennas and install them onto the antenna connector (2) or insert an extension antenna onto the antenna connector.
- Align the corresponding cables (included) to each matching output of each receiver.
- Insert DC lead into the DC socket (4)
- (5) DC Output, the voltage is equal to the DC inputs.
- To operate, simply power on the power switch.
EXAMPLE CONNECTION DIAGRAM
TNC / SPA- 1000A (Input) / TNC ANT A (Output) / TNC ANT B (Output) / DC output
12V
PRODUCTS
1. SPA-1000A Active directional antennas.
2. SPA-1002P Antenna / power distribution system.
3. SU-990D-HT (x 2) Digital Wireless Microphones.
Antenna mounting stand / TNC connector 5meters cable.
OPTIONALS
Antenna mounting bracket Antenna mounting stand
SPECIFICATIONS
SPA-1000A ACTIVE DIRECTIONAL ANTENNA
| Frequency Range | 470 – 1000 MHz |
|---|---|
| Voltage Standing Wave Ration (VSWR) | <2:1 |
| Impedance | 500 |
| Antenna Gain | >3 dBi, typical |
| Efficiency | >50 %, typical. |
| Reception Pattern (3dB Beam Width) | 90’vertical, 180torizontal |
| Connector Type | TNC, Female |
| Dimensions (H x W x D) | 369 x 361 x 57 mm |
| Net Weight (include package) | 1 KG |
SPA-1002P ANTENNA / POWER DISTRIBUTION SYSTEM —- 450 – 1000
MHz
| Power requirements | 12V DC |
|---|---|
| DC output | 12V DC (x4) |
Output current
(total from all DC outputs)| 5A maximum
Frequency range| 450 – 1000 MHz
Impedance| 50 
Antenna input| 50 
, 9V DC
Antenna output| 50
Operating temperature range| -20 °C to 60 °C
---|---
Connector Type| TNC, Female
Dimensions (H x W x D)| 549 x 301 x 110 mm
Net Weight (include package)| 3.85 Kgs.
TRADEMARK AND LICENSES
is a trademark of SOUND VISION
CO., LTD. Registered in Thailand, China, Laos, and other countries. Names are
trademarks or registered trademarks of their respective owners.
SOUND VISION CO., LTD.
9 Chaiyaphruek Rd.,Taling Chan,Taling Chan, Bangkok 10170 Thailand
Support: 02-433-9988
Line-at: @soundvision
Email: info@soundvision.co.th
www.soundvisionpro.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>