audizio SB90 Soundbar plus Wireless Sub Instruction Manual

: June 8, 2024
: audizio

Table of Contents

LINPACKING INSTRUCTION
PROUDACT OVERVIEW
REMOTE CONTROL
USB
HDMI
LINE IN
OPTICAL-OR COAXIAL INPUT
BT MODE
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

audizio SB90 Soundbar plus Wireless Sub Instruction Manual

Congratulations to the purchase of this Audizio product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shockand malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or\ dimmer.
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified\ technician only.
Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the life time.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warningscontained in this manual. Audizio cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

LINPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature

PROUDACT OVERVIEW

Standby / Mode
Press to cycle through all available modes (line, optical, coaxial, BT, USB and HDMI (ARC)). Long press to turn the device on/off.
Play/pause / Mute
Press to mute the device. Long press to (re)start or pause playback.
VOL+ / Next
Press to skip to next track. Long press to increase the volume level.
VOL – / Previous
Press to go to previous track. Long press to decrease the volume level.
HDMI (ARC) input
USB input
USB slot for inserting USB flash drives.
LINE input
3.5mm auxiliary jack.
Coaxial input
Optical input
For using optical input: please change your TV audio output to PCM (PCM is a form of digital signal that is used to represent analogue data, and is an optional audio format on many TVs).
DC power input
Connector for inserting the supplied power adapter.

REMOTE CONTROL

Standby
Press to turn the device on/off.
Mute
Press to (un)mute the device.
EQ
Press to switch between 3 different equalizer modes.
VOL +
Press to increase the volume level.
Previous
Press to change to previous track.
Play/pause
Press to (re)start or pause playback.
Next
Press to change to next track.
VOL –
Press to decrease the volume level.
OPT
Press to change to optical input mode directly.
ARC
Press to change to HDMI (ARC) input mode directly.
COAX
Press to change to coaxial input mode directly.
BT
Press to change to BT input mode directly.
Repeat
Press to repeat a single track. Press again to repeat all tracks. Press again to cancel repeat.
Mode
Press to switch modes. Cycle through line, optical, coaxial, BT, USB and HDMI (ARC).

USB

Ensure that the files stored on the flash drive are in MP3 format.
Insert the USB flash drive in the designated USB slot on the back of the device.
Press the mode key repeatedly until USB mode has been reached.
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback

HDMI

An HDMI (ARC) cable is needed (not included).

Connect one end of the HDMI(ARC) connecting cable to the HDMI output of the source device and the other end to the HDMI input of the soundbar.
Press the mode key repeatedly until HDMI mode has been reached or press the ARC button on the remote to directly initiate HDMI mode (the LED indicator will show “Hd”).
Make sure the source audio is set to HDMI settings.
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.

LINE IN

A 3.5mm audio connecting cable is needed (included).

Connect one end of the 3.5mm connecting cable to the line output (AUX) of the source device and the other end to the line input (AUX) of the soundbar.
Press the mode key repeatedly until line mode has been reached (the LED indicator will show “LINE”).
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.

OPTICAL-OR COAXIAL INPUT

An optical- or coaxial connecting cable is needed (optical is included).

Connect one end of the optical or coaxial connecting cable to the according output of the source device and the other end to the according input of the soundbar.
Press the mode key repeatedly until the optical or coaxial mode has been reached or press the OPT or COAX button on the remote to directly initiate the desired mode (the LED indicator will show “OPt” or “COA”, depending on the chosen mode).
Make sure the source audio is set to OPT or COA settings.
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.

BT MODE

Press the mode key repeatedly until BT mode has been reached or press the BT button on the remote to directly initiate BT mode (the LED indicator will blink “bt” in red color).
Turn on the BT function on your source device and search for “SB90” to pair. When the pairing has been successful, the soundbar will emit a sound to indicate the successful pairing.
Use the operational buttons (volume, play/pause, etc.) on the device or remote to control the playback.