VIKING M301 Wireless Microphone User Manual

: June 4, 2024
: VIKING

Table of Contents

VIKING M301 Wireless Microphone
Wireless microphone VIKING M301 / Jack 3.5mm – user manual
Package contents
Transmitter control
Receiver control
Controlling the case
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIKING M301 Wireless Microphone

Wireless microphone VIKING M301 / Jack 3.5mm – user manual

Thank you for choosing a VIKING product.
The VIKING M301/Jack 3.5mm is a smart wireless microphone that provides professional recording output. No additional application installation is required and you can use it for most devices that support audio recording. It can be used in many ways: online live streaming, Vlog video recording, program interview, recording, instructional videos, and more.
The wireless microphone consists of three parts (See Figures 1 and 2 and 3), one is the housing, the other is the microphone transmitter and the third is the Jack 3.5mm receiver.
Step 1: Connect the receiver to your device. The connection is successful if the LED on the receiver ﬂashes green.
Step 2: Remove the transmier from the housing. The LED on the transmier will ﬂash green.
Step 3: Once the transmier is paired with the receiver, the LEDs stop ﬂashing and glow a steady green light. At this point, you can record audio using any app or program on your device.
Description:
Case (ﬁg.1)

LED indicator
USB-C charging input
Transmier (ﬁg.2)
LED indicator
Reset buon
Clip for attachment
Metal contact
Receiver (ﬁg.3)
Jack 3.5mm input for connecting your device
LED indicator
Reset button

Package contents

Housing (transmier, receiver)
USB-C charging cable
Wind protector
Instructions for use

Transmitter control

ON| The transmier automatically switches on when the case is opened.| The indicator light will turn green and after a while, it will ﬂash green and search for a receiver to pair.
---|---|---

OFF

| The transmier will automatically turn oﬀ when inserted into the case and the case is closed, or if no receiver is paired for ten minutes.|

The light does not illuminate when switched oﬀ.

Charging| Insert the transmier into the housing. Charging will turn on automatically|

When charging, the light does not illuminate.

Pairing

| Pairing starts automatically when removed from the case.| The indicator light ﬂashes green while pairing or searching for a pairing receiver. Aer pairing with a receiver, the light stays green throughout the connection.
Battery capacity alarm| The battery level is below 20%.| The LED ﬂashes blue.

Reset

| Press the reset button once a long (3s) to reset the device. To cancel pairing, press the reset button with two quick presses (2x/1s)| When resting, the LED starts ﬂashing green. The transmier then reconnects to the receiver and the LED turns green.

Receiver control

ON| The receiver automatically switches on when connected to your device.| The indicator light will turn green and after a moment it will ﬂash green looking for the transmier to pair.
---|---|---
OFF| The receiver automaticallyswitches oﬀ when disconnected from your device.| The light does not illuminate when switched oﬀ.
Charging| The receiver takes the necessary power from your connected device.| —-

Pairing

| Pairing starts automatically when you plug in the receiver and turn on the transmier.| The indicator light ﬂashes green while pairing or searching for a transmier to pair. After pairing with a transmier, the light stays green for the entire connection.

**Reset***

| To reset the device, press the reset button once long (3s). To cancel pairing, press the reset button with two quick presses (2x/1s).| ****

—-

Controlling the case

Charging the case| The LED ﬂashes red when charging. When the case is fully charged, the LED goes oﬀ.
---|---
Charging one

mic.

| If the case is charging the junction box, the LED indicator ﬂashes green. If the microphone is charged, the LED goes oﬀ

Battery status indication

| Green: 100-75%

Blue: 74-36%

Red: 35-0%

When resting, a restart must be performed on both devices (receiver and transmier)

NOTE: If the receiver is connected to your device, no audio recording (recordings made with the microphone, audio recording) ﬁles of all formats, YouTube, Spotify, etc.) and phone calls cannot be played. To play audio recordings or make telephone calls disconnect the receiver from your device.
Warning:

Do not disassemble the device and its accessories.
Do not modify, disassemble, open, puncture, or otherwise tamper with the device.
Protect from ﬁre and prolonged direct sunlight to prevent overheating and damage.
Avoid any contact of the device with water!
Do not use the device in a dusty environment.
This appliance is not intended for use by persons (including children) with physical, sensory, or mental disabilities or lack of experience and knowledge that prevents the safe use of the device.
Do not use chemical cleaners, etc.
Stop using this device immediately if the device is damaged in any way. Keep out of reach of children! Small parts of the device can be inhaled or swallowed by children.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation of the device.

Do not dispose of the product at the end of its useful life as unsorted municipal waste, use separate waste collection points. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed informaon about recycling of this product, please contact your local city oﬃce, your household waste disposal service, or the shop where you purchased the product.