KARCHER SC 2 EasyFix Steam Cleaner Instruction Manual

Instruction Manual

SC 2 EasyFix
SC 2 EasyFix Premium

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first time. Proceed accordingly. Keep both books for future reference or for future owners.

Intended use

Only use the appliance in private households. The appliance is intended for cleaning with steam and can be used with appropriate accessories as described in these operating instructions. Detergents are not required. Observe the safety instructions.

Environmental protection

The packing materials can be recycled. Please dispose of the packaging in accordance with environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries, or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.com/REACH

Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery
The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Warranty
The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorized customer service site. (See overleaf for the address)

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.

Symbols on the device
(according to the type of appliance)

Pressure controller
The pressure controller keeps the pressure in the steam boiler as constant as possible during operation. The heating is switched off when the maximum operating pressure is reached in the steam boiler and is activated if there is a pressure drop in the steam boiler as a result of steam removal.

Safety lock
The safety lock seals the steam boiler from the steam pressure present. If the pressure regulator is defective and overpressure occurs in the steam boiler, an pressure relief valve opens in the safety lock, and steam leaks out through the lock. Prior to restarting the appliance, contact the responsible KÄRCHER Customer Service.
Safety thermostat
The safety thermostat prevents the device from overheating. If the pressure controller fails and the device overheats, then the safety thermostat switches the device off.
To reset the safety thermostat, contact the responsible  Customer Service.

Description of the device

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).
For the illustrations, refer to the graphics page. Illustration A

1 Indicator light (green) – mains voltage present
2 Indicator light (orange) – heating
3 Safety lock
4 Holder for accessories
5 Park bracket for floor nozzle
6 Mains connection with mains plug
7 Non-driven wheels
8 Steering roller
9 Steam gun
10 Unlocking button
11 Selector switch for steam volume (with child lock)
12 Steam lever
13 Steam hose| 14 Spotlight nozzle
15 Round brush (small, black)
16 Power nozzle
17 Round brush (large)
18 Manual nozzle
19 Microfibre cover for manual nozzle
20 Extension tubes (2 x)
21 Unlocking button
22 Floor nozzle
23 Hook and loop fastener
24 Microfibre floor cloth (1 x)
25 Microfibre floor cloth (2 x)
Optional
---|---
****| Risk of burns, the surface of appliance be- comes hot during operation
---|---
| Risk of scalding from steam
| Read operating instructions

Installation

Installing accessories

1. Insert and engage the steering roller and non-driven wheels. Illustration B

2. Push the open end of the accessory onto the steam gun so that the unlocking button on the steam gun engages. Illustration H

3. Push the open end of the accessory onto the spotlight nozzle. Illustration I

4. Connect the extension tubes with the steam gun.
   a Push the 1st Push the first extension tube onto the steam gun so that the unlocking button on the steam gun engages.
   The connection pipe is connected.
   b Push the 2nd extension tube onto the 1st extension tube.
   The connection pipes are connected. Illustration J

5. Push the accessory and/or the floor nozzle onto the free end of the extension tube. Illustration K
   The accessory is connected.

Disconnecting accessories

1. Set the selector switch for the steam volume to the rear. The steam lever is locked.
2. Push the unlocking button and pull the parts apart. Illustration M

Operation

Filling water

Note
Warm water reduces the heating-up time.
Note
Descaling the steam boiler is not required if commercially available distilled water is used.

1. Unscrew the safety lock. Illustration C
2.  Drain the water completely out of the steam boiler. Illustration Q
3. Fill a maximum of 1 liter of distilled water or tap water into the steam boiler. Illustration C
4. Insert the safety lock. Illustration D

Switch on the device

1. Place the device on a firm surface.

2. Insert the mains plug into a socket. Illustration E
   The green and orange indicator lights illuminate.

3. Wait until the orange indicator light – heating goes out. Illustration F

4. Press the steam lever. Illustration G
   Steam leaks out.

Regulating the steam volume
Note
The device heating always switches on again during use to maintain the pressure in the steam boiler. The orange indicator light – heating illuminates to indicate this.

The expelled steam volume is regulated using the selector switch for steam volume. The selector switch has 3 positions:

| Maximum steam volume
---|---
| Reduced steam volume
| No steam – child lock
Note
In this position, the steam lever cannot be operated.

1.  Set the selector switch for the steam volume to the required steam volume.
2. Press the steam lever.
3. Before starting the cleaning, point the steam gun at a cloth until steam is expelled evenly.

Topping up the water
If the steam volume is reduced during work or if no more steam volume comes out, the water will have to be refilled.

1. Switch the appliance off, see Chapter Switch off the appliance.
2. Unscrew the safety lock.
3. Fill a maximum of 1 l distilled water or tap water into the steam boiler.
4. Insert the safety lock.
5. Insert the mains plug into a socket.
6. Wait until the orange indicator light – heating goes out.
   The appliance is ready for use.

Switch off the appliance

1. Pull the mains plug out of the socket.

2. Press the steam lever until no more steam flows out. Illustration N
   The steam boiler is depressurized.

3. Set the child lock (selector switch for steam volume) to the rear.
   The steam lever is locked.

Rinsing out the steam boiler
Rinse the appliance’s steam boiler after max. every tenth boiler fill.

1. Switch the appliance off, see Chapter Switch off the appliance.
2. Allow the appliance to cool down.
3. Disconnect the accessory.
4. Fill the steam boiler with water and swing it around vigorously. Lime residue which has been deposited on the bottom of the steam boiler will be released as a result.
5. Drain the water completely out of the steam boiler. Illustration Q

Storing the device

1. Connect the extension tubes to the large mounts for accessories.
2. Connect a manual nozzle and spotlight nozzle to each extension tube.
3. Fasten the large round brush to the spotlight nozzle.
4. Connect the small round brush and nozzles to the medium-sized mount for accessories.
5. Hang the floor nozzle in the park bracket. Illustration O
6. Wind the steam hose around the extension tube and connect the steam gun to the floor nozzle. Illustration P
7. Wind the main cable around the extension tube.
8. Store the device in a dry location that is protected from frost.

ATTENTION
Material damage due to a stuck safety lock
If the safety lock is not removed after cleaning, there is a possibility that the lock could get stuck in the thread. After cleaning, unscrew the safety lock and store it, for example, with the other device accessories.

Important application instructions

Cleaning the floor areas
We recommend sweeping the floor or vacuum cleaning it before using the appliance. In this way, the floor will be cleared of dirt and loose particles before the wet cleaning.
Freshening up textiles
Prior to using the appliance, always check the compatibility of the textiles at a concealed point: Steam down the textile, allow it to dry, and then check it for any change in color or shape.

Cleaning coated or painted surfaces
ATTENTION
Damaged surfaces
Steam can loosen the wax, furniture polish, plastic coatings, or paint and edge band from the edges.
Do not direct the steam at glued laminated edges as the edge band may loosen.
Do not use the appliance for cleaning unsealed wood or parquet floors.
Do not use the appliance for cleaning painted or plastic coated surfaces such as kitchen or living room furniture, doors, or parquet.
1. To clean these surfaces, steam a cloth briefly and use it to wipe over the surfaces.

Glass cleaner
ATTENTION
Glass breakages and damaged surfaces
Steam can damage sealed points of the window frame and, at low outside temperatures, lead to tension on the surface of window panes and hence to glass breakages.
Do not direct the steam at sealed points on the window frame.
At low outside temperatures, heat up the window panes by gently steaming the full surface of the glass.

• Clean the window area with a manual nozzle and cover. To remove the water, use a squeegee or wipe the surfaces dry.

How to use the Accessories

Steam gun
The steam gun can be used for the following applications without accessories:
● For removing slight creases from the hanging clothing items: Steam the clothing item from a distance of 10-20 cm.
● For wiping damp dust: Steam a cloth briefly and use it to wipe over the furniture.
Spotlight nozzle
Round brush (small)
The small round brush is used for cleaning stubborn dirt.
Stubborn dirt can be removed more easily by brushing.

ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive surfaces.

1. Fit the round brush to the spotlight nozzle. Illustration I

Round brush (large)

The large round brush is suitable for cleaning large rounded surfaces, e.g. wash basin, shower tray, bathtub, and kitchen sink.
ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive surfaces.

1. Fit the large round brush to the spotlight nozzle. Illustration I

Power nozzle
The power nozzle is used for cleaning stubborn dirt, blowing down corners, joins, etc.

1. Install the power nozzle onto the spotlight nozzle according to the round brush. illustrations

Manual nozzle
The manual nozzle is used for cleaning small areas that can be washed down, shower cubicles, and mirrors.

1. Push the manual nozzle onto the steam gun according to the spotlight nozzle. Illustration H 2.
2. Pull the cover over the manual nozzle.

Floor nozzle

The floor nozzle is used for cleaning washable walls and floor coverings e.g. stone floors, tiles, and PVC floors.
ATTENTION
Damage due to build-up of steam
Heat and moisture can lead to damage. Check the heat resistance and steam effect on an in- conspicuous area using a minimal volume of steam prior to use.
Note
Detergent residue or care emulsions on the surface to be cleaned can lead to streaks during steam cleaning, which will disappear however once these have been used several times.
We recommend sweeping the floor or vacuum cleaning it before using the device. In this way, the floor will be cleared of dirt and loose particles before the wet cleaning commences. Work slowly on surfaces that are heavily soiled so that the steam has longer to take effect.

1. Connect the extension tubes with the steam gun. Illustration J
2. Push the floor nozzle onto the extension tube. Illustration K
3. Fasten the floor cleaning cloth to the floor nozzle.
   a Place the floor cleaning cloth with the hook and loop fastener strips pointing upwards on the floor.
   b, Place the floor nozzle onto the floor cleaning cloth, applying slight pressure. Illustration L
   The floor cleaning cloth will stick to the floor nozzle of its own accord due to the hook and loop fastener.

Removing the floor cleaning cloth

1. Place one foot on the bottom corner of the floor cleaning cloth and lift the floor nozzle up. Illustration L

Note
Initially, the floor cleaning cloth’s hook and loop fastener strip is very strong and cannot be removed from the floor nozzle easily. After the floor cleaning cloth has been used several times and washed, it is easier to remove from the floor nozzle and it has reached the optimum adhesion.

Parking the floor nozzle

1. Hang the floor nozzle in the park bracket during breaks in work. Illustration O

Care and service

Descaling the steam boiler
Note
Descaling the steam boiler is not required if commercially available distilled water is used.
Note
Since the lime becomes caked on the appliance, we recommend descaling the appliance as specified in the table (BF=boiler fillings) based on the number of times the steam boiler is filled.

Note
Your water board or municipal utility authority can provide information on the hardness of tap water.
ATTENTION
Damaged surfaces
The descaler may corrode sensitive surfaces.
Fill and empty the appliance carefully.

1. Switch off the device, see chapter Switch off the appliance.

2. Allow the device to cool down.

3.  Unscrew the safety lock.

4.  Drain the water completely out of the steam boiler. Illustration Q
   ATTENTION
   Appliance damage due to descaler
   An unsuitable descaler and incorrect dosing of the descaler may damage the appliance. Only use KÄRCHER descaler. Use 2 dosing units of the descaler for 1.0 l of water.5.

5. Apply the descaler solution to the descaler according to the details.

6. Fill the descaler solution into the steam boiler. Do not seal the steam boiler.

7. Allow the descaler solution to take effect for approx. 8 hours.

8. Drain the descaler solution completely out of the steam boiler.

9. Repeat the descaling process if necessary.

10. Rinse the steam boiler 2-3 times with cold water in order to drain all the descaler solution residue.

11. Drain the water completely out of the steam boiler. Illustration Q

Care of accessories
(Accessories – depending on the scope of delivery)
Note
The microfiber cloths are not suitable for dryers.
Note
When washing the clothes, observe the instructions on the washing tag. Do not use any liquid softeners as this will affect the ability of the clothes to pick up dirt.
1. Wash the floor cleaning cloths and covers at a max. the temperature of 60 °C in the washing machine.

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service.
WARNING
Risk of electric shock and burns
Trying to eliminate faults while the appliance is connected to the mains or has not yet cooled down is always dangerous. Remove the mains plug.
Allow the appliance to cool down.
Reduced steam quantity
The steam boiler is scaled.

• Descale the steam boiler.
  No steam
  No water in the steam boiler

• Refill water, see Chapter Topping up the water.
  The steam lever cannot be pressed
  The steam lever is locked with the child lock.

• Set the child lock (selector switch for steam volume) to the front.
  The steam lever is released.
  Long heating-up time
  The steam boiler is scaled.

• Descale the steam boiler.
  High water egress
  The steam boiler is too full.

• Press the steam gun until a little water comes out.
  High water output
  The steam boiler is scaled.

•  Descale the steam boiler.

Technical data

Electrical connection

Voltage| V| 220-240
Phase| ~| 1
Frequency| Hz| 50-60
Protection class| | IPX4
Protection category| | I
Performance data
Heating capacity| W| 1500
Maximum operating pressure| MPa| 0.32
Heating-up time| Minutes| 6.5
Continuous steaming| g/min| 40
Maximum steam blast| g/min| 100
Filling quantity
Steam boiler| l| 1.0
Dimensions and weights
Weight (without accessories)| kg| 3.1
Length| mm| 380
Width| mm| 254
Height| mm| 260
Subject to technical modifications.

THANK YOU!
MERCI! DANKE! GRACIAS!

Register your product and benefit from many advantages.

www.kaercher.com/welcome
Rate your product and tell us your opinion.

Register
your product
at www.kaercher.com/welcome

www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212

http://kaer.ch/er/?l=TwSoJtl9IUOwZyAe1rHDyw

References

• Cher - Official Site
• Cleaning equipment and pressure washers | Kärcher International
• Cleaning equipment and pressure washers | Kärcher International
• Dealer Search | Kärcher International
• Home and Garden Warranty Registration USA - Kärcher
• Cleaning Appliances & Solutions for Home & Commercial Use | Kärcher New Zealand
• Powerful Cleaning Machines and Solutions for Home, Commercial or Industrial Use | Kärcher Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>