TruVision M Series Varifocal IP Dome Cameras Installation Guide

June 8, 2024
TruVision

TruVision M Series Varifocal IP Dome Cameras

Installation Guide

P/N 1062-ALL • REV A • ISS 28SEP2021

       UKCA

  Disposal B

TruVision M Series Varifocal IP Dome Cameras QR 1

https://firesecurityproducts.com/en/bu/video

  • TVGP-M01-0202-DOM-G/W
  • TVGP-M01-0402-DOM-G/W
  • TVGP-M01-0802-DOM-G/W

TruVision M Series Varifocal IP Dome Cameras A1

A1

TruVision M Series Varifocal IP Dome Cameras A1b

B1

1

TruVision M Series Varifocal IP Dome Cameras 01

2

TruVision M Series Varifocal IP Dome Cameras 02

3

TruVision M Series Varifocal IP Dome Cameras 03

4

TruVision M Series Varifocal IP Dome Cameras 04

5

TruVision M Series Varifocal IP Dome Cameras 05

6

TruVision M Series Varifocal IP Dome Cameras 06

7

TruVision M Series Varifocal IP Dome Cameras 07

8

9

Installation environment

When installing your product, consider these factors:

  • Electrical: Install electrical wiring carefully. It should be done by qualified service personnel. Always use a proper PoE switch, a 12 VDC UL listed Class 2, or CE certified power supply to power the camera. Do not overload the power cord or adapter.
  • Ventilation: Ensure that the location planned for the installation of the camera is well ventilated.
  • Temperature: Do not operate the camera beyond the specified temperature, humidity or power source ratings. The operating temperature of the indoor camera is between -30 °C to +60 °C. Humidity is 95% or less (non-condensing).
  • Servicing: Do not attempt to service this camera yourself. Any attempt to dismantle or remove the covers from this product will invalidate the warranty and may also result in serious injury. Refer all servicing to qualified service personnel.
  • Moisture: Do not expose the camera to rain or moisture, or try not to operate it in wet areas. Turn the power off immediately if the camera is wet and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.
Camera description

See Figure 1

  1. Reset button
  2. Micro SD card slot
  3. Network cable
  4. Power cable
  5. Audio cable
  6. Alarm cable
Technical specifications

Electrical

Voltage input| 12 VDC, PoE 802.3af, Class 3
Power consumption| Max. 12.5 W
Miscellaneous
Connectors| Network Port (PoE), 12 VDC Power In
Audio:1 input (line in), 1 output (line out)
Alarm In: 1 input, 1 output (max. 12 VDC, 30 mA)
Operating temperature| -30 to +60 °C
Dimensions| ø153 × 112 mm
Weight| 880 g
Environmental rating| IP67; IK10

Legal information

© 2021 Carrier. All rights reserved. Specifications subject to change without prior notice.

TruVision names and logos are a product brand of Aritech, a part of Carrier. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.

While every precaution has been taken during the preparation of this manual to ensure the accuracy of its contents, Carrier assumes no responsibility for errors or omissions.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals