denver LBF-403 Lamp Light User Manual
- June 8, 2024
- Denver
Table of Contents
LBF-403 Lamp Light
User Manual
User Manual
Denver LBF-403
facebook.com/denveteu
LBF-403 Lamp Light
Denver Smart Home 
https://play.google.com/store/apps/details?id=com.denver.smartliving
https://apps.apple.com/gb/app/denver-smart-home/id1484849812?l=da 
Lighting product instructions for use Universal Edition Denver Smart Home App
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- Keep product out of the reach of children and pets.
- Make sure the power switch controlling is turned off before installing or uninstalling.
- The use of the product is intended for indoor and dry conditions.
- Handle the product carefully. The product is fragile. It can break easily if dropped to the floor.
- Never open the product. Repairs or service should only be performed by qualified personnel. Touching the inside electrics can cause electric shock if connected to power.
- Do not use cleaning solvents or abrasives. Only use soft a cloth for outside cleaning of the device. Do not clean when connected to power. Disconnect the bulb first before cleaning.
- When the bulb is turned on, it will become hot as light is emitted. To avoid burning your hands, do not touch the bulb immediately after turning off the power.
Preparation for use
- Power on the lamp while ensuring that your smartphone is connected to the 2.4 OHz Wi-Fi network;
- Download and open the app
- Search for”Denver Smart Home”in the App Store or scan the QR code below or on the package to download and install the app.
- Tap the”Registerbutton to register if you download it for the first time.If you already have an account,tap the”Login”button
Device Network configuration
- Open the Denver Smart Home app and access the”Devices”page.Tap the”+”mark in the upper right corner of the page.
- Select”Lighting devices”on the device list pag
- Two configuration modes are available for connection:EZ mode and AP mode.
I) EZ Mode
Ensure the light flashes quickly (twice a second). This indicates that the
lamp is in configuration mode. Press the lamp switch 3 times (on-off-on-off-
on) until the light flashes quickly. Tap the “Confirm light blinks rapidly”
button on the “Add Device” page to start connection.
Please notice – All products are subject to change without any notice. We
take reservations for errors and omissions in the manual.
Electric and electronic equipment and included batteries contains materials,
components and substances that can be hazardous to your health and the
environment, if the waste material (discarded electric and electronic
equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol, seen above. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
appropriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with legislature and will not harm the
environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites, or be collected from the households.
Additional information is available at the technical department of your city.
Hereby,Denver A/S declares that the radio equipment type LBF-403 is in
compliance with Directive 2014/53/EU. The Mil text of the EU declaration of
conformity is available at the following internet address: denver.eu and then
click the search ICON on topline of website. Write model number: LBF 403. Now
enter product page, and red directive is found under downloads/other
downloads. Will Frequency Range : 2412-2484MHz Max Output Power:4.9W
DENVER A/S
Omega SA, Soeften DK-8382
Hinnerup Denmark
www.facebook.com/denver.eu
Nordics
Headquarter
Denver A/S Omega 5A, Soeften DK-8382
Hinnerup Denmark
Phone: +45 86 22 51 00 (Push “2” for support)
E-Mail For technical questions, please write to:
support@denver.eu
For all other questions please write to:
denver@denver.eu
Benelux/France
Denver Benelux BV
Barwoutswaarder 13C+D 3449 HE Woerden
The Netherlands
Phone: +31 348 420 029
E-Mail: support-nlAdenver.eu
Germany
Denver Germany GmbH Service Gutenbergstrasse 1 94036 Passau
Phone: +49 851 379 369 40
E-Mail Repair-germany@denver.eu
Fairfax GmbH Repair and service
Rudolf-Diesel-Str. 3 TOR 2 53859
Niederkassel (for TV, E-Mobility/Hoverboards/Balanceboards, Smartphones &
Tablets)
Tel.: +49 851 379 369 69 E-Mail:
denver@fairfixx.de
Austria
Lurf Premium Service GmbH Deutschstrasse
1230 Wien Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at
Spain/Portugal
Denver AS Spain S.A Cl Moscu, 1 Pol.Ind.Mas de
Taus 46185 La Pobla de Vallbona Valencia (Spain)
Spain Phone: +34 960 046 883
Mail:
serviciotecnico.denver@denver.eu
Portugal: Phone: +35 1255 240 294
E-Mail: denver.serviceasatfiel.com
Denver A/S
Omega 5A, Soeften DK-8382
Hinnerup Denmark Denver.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>