ACCORD LIGHTING 3042 Floor Lamp Accord Balance Instruction Manual
- June 8, 2024
- ACCORD LIGHTING
Table of Contents
3042
E-26
ASSEMBLY INSTRUCTIONS
USA & CANADA
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component. 
Line:Balance
Family:Floor Lamp
Description:Accord Floor Lamp Balance 3042
Material:Natural Wood Veneer MDF and carbon steel
Weight:
MOUNTING YOUR LUMINAIRE
- Once all parts have been removed from box along with any protective packing, install a standard E-26 base lightbulb (not included) into the lampholder within the luminaire. Use only lightbulbs that do not exceed the maximum wattage rating.(25W)
- Plug it into a proper electrical outlet. Your luminaire is now ready for use.
- Use the electrical switch to turn it ON/OFF.
SAFETY WHEN CONNECTING TO THE MAINS
Be sure to completely unwind the power supply cable. Before inserting or
removing the plug from the outlet, make sure the luminaire is turned off.
Never unplug by pulling on the cable. Never use with adapters or extension
cords unless the plug can be fully inserted.
Do not alter the plug under any circumstances.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY. !
Its recommended to read these instructions completely and carefully before
proceeding.
**SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
**
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for
validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>