VIKING X-1000 Solar Charging Station User Manual

: June 8, 2024
: VIKING

Table of Contents

WARNING
WHAT”S IN THE BOX
FEATURES
TFT DISPLAY
CHARGING
RECHARGING
FAQ s
TECHNICAL SPECIFICATIONS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIKING X 1000 Solar Charging Station

VIKING X-1000Congratulations on your X-1000 purchase

Please read these instructions carefully before use to ensure safe usage.
DANGER
Noncompliance may very likely lead to serious injuries’ or death.

DO NOT disassemble. repair or modify the unit or the battery.
DO NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
DO NOT charge. use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any ffectenstances.
DO NOT touch the unit or the plug-in points if your hands are wet.
DO NOT connect any metallic objects to the AC input or output.
DO NOT rub your eyes if fluid from inside the unit should get in your eyes.
DO NOT dispose the unit together With household waste.
DO NOT use any Inappropriate power cords.
DO NOT operate the unit above the specified input voltage.
DO NOT use the unit if it is not functioning correctly.
DO NOT move the unit if it IS recharging or M use.

WARNING
Noncompliance may lead to Serious injuries’ or death.

Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet
environment. Check the wit prior to every use. DO NOT use the unit if it is damaged. broken.
DO NOT use the unit if the power cord is damaged or broken.
Keep the unit away from chedren. DO NOT let cfMdren use the power supply unit
Keep this product away from Pets.
DO NOT use or store the unit in an area or environment with high temperature.
Should fluid from inside the unit tome in contact with your shin or dotting, wash the affected areas with tap water.
In a storm, unplug the power cord from the socket
DO NOT charge the unit via power supply systems that operate outside of 100-24W.
DO NOT place the unit on its side or upside clown while in use or storage.
DO NOT use accessories for other usage.

CAUTION
Noncompliance may lead to irauries2 and 1 or property damage’.

If rust, peculiar odors. overheating or other abnormal circumstances are observed. stop using the unit immediately and contact dealer or our customer Service center.
The unit complies with all legal requirements for transport of dangerous goods.
Make sure that the unit is Properly seared when transporting it in a motor vehicle.
Only charge, use and store the unit within an ambient temperature according to the specifications.
Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
make sure that the device you are connecting is switched of before you connect it.

Serious Injuries include blindness, bums, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
Injuries include bums, electric shock, etc., which do not lead to hospitalization or permanent treatment.
Property damage includes buildings, belongings and pets, etc.

WARNING

| Only use within the specified temperatures.
---|---
| Avoid serious damage and drops.
| Warranty void if disassembled
| Do not submerge in water
| Please dispose of all components in accordance with regulations
| Always use supplied/certified charging cables
| To extend and preserve the battery life, please use and recharge at least once every 4 months.
| Not permitted on aircraft

We will not be held responsible or liable for any damage incurred through acts of nature, use outside of the recommended guidelines and specifications, accidental damage, flood and serious water damage. Intentional misuse and/or abuse of the product in any way outside of the recommended guidelines will immediately invalidate your warranty. In the event of failure, do not attempt to repair any part of this product. Contact our customer service immediately if still within your product warranty period.
Any use outside of that is recommended for this product will render the warranty invalid.
Intended Use: The X-1000 is designed as a portable power access point and is primarily made available for low power devices of 1000W or less. It is not intended for use with high power devices and should only be used with devices requiring 1000 watts or less to preserve the lifetime of the X-1000.

This device complies with part 15 of the FCC rules. Operation is subject to Cthe following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including RoHS interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WHAT”S IN THE BOX

VIKING X 1000 Solar Charging Station - Fig

FEATURES

VIKING X 1000 Solar Charging Station - Fig 1

Power ON/OFF
Cigarette lighter 12V 10A
12V 7A 5.5X2.1 mm ports
USB-C PD3.0 100W
USB-A QC3.0 18Wx2
100-240V 210W AC input
12V 10A 5.5×2.5mm ports
Two pin aviation socket for solar/car charging MPPT 12-70V 12A 352.8W Max. input
AC ON/OFF
120V 60Hz 1000W AC output
Space for charging cable
3W LED light 13 LED light button

VIKING X 1000 Solar Charging Station - Fig 2

VIKING X 1000 Solar Charging Station - Fig 3

TFT DISPLAY

VIKING X 1000 Solar Charging Station - icon10

Press the main power button, it will turn on the TFT screen. From the screen, you can check the battery capacity, power input, DC output, AC voltage & frequency, output, inside temperature, cooling fan, LED light.

CHARGING

DC OUTPUT Press the main power button to turn on DC outputs. Please ensure the total DC power consumption is less than 120W, or it will automatically shut off, need to restart the power station.

VIKING X 1000 Solar Charging Station - icon11

AC OUTPUT
Press AC ON/OFF button while main power is ON. Please ensure the total power consumption is less than 1000W, or it will automatically shut off, need to restart the power station.

VIKING X 1000 Solar Charging Station - icon11

LED FLASHLIGHT
Press the LED light button to turn on the 3W light while main power is ON. A second press will turn the light to SOS mode. A third press on the button will turn off the light.

RECHARGING

Before use or storage, plug your X-1000 into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel, as soon as possible. There are many ways to recharge your X-1000:
Solar charging
The solar charging input is MPPT 12-70V 12A 352 8W Max
If using one 18V or 36V solar panel, just connect the solar panel to DC IN directly using the included MC4 solar charging cable.

VIKING X 1000 Solar Charging Station - Fig 4

If using two 18V solar panels, connect the solar panels in series first, then connect to DC IN using the MC4 solar charging cable.

VIKING X 1000 Solar Charging Station - Fig 5

If using two 36V solar panels, connect the solar panels in parallel, then connect to DC IN using the MC4 solar charging cable.

VIKING X 1000 Solar Charging Station - Fig 6

If using four 18V solar panels, connect two solar panels in series to get 36V array first, then connect two PV arrays in parallel to DC IN using the MC4 solar charging cable.

VIKING X 1000 Solar Charging Station - Fig7

AC charging
The AC charging input is CC/CV mode, 100-240V AC input, battery charging current is about 7.5A, Max. 210-220W. It takes about 6 hours to fully charge X-1000.

VIKING X 1000 Solar Charging Station - Fig 8

Car charging
The Car charging input is 12V 10A Max. It takes about 9 hours to fully charge X-1000. (Only recharge the generator by car when the engine is ON, or it may damage the car battery.)

VIKING X 1000 Solar Charging Station - Fig8

FAQ s

1. What kind of the battery chemistry is used? What is the battery life cycle?****

– X-1000 uses 1C charge/3C discharge Electric Vehicle Li-ion NCM polymer battery cell, it has 2000 cycles @ 1C charge/discharge to 80% of initial capacity.

2. Can I charge and discharge this simultaneously?****

– Yes, it supports pass through charging for both AC and DC loads.

3. How long does it take to charge X-1000 by solar panel?****

– It depends on many conditions, like weather, solar panel power, angle, etc. Under good conditions, it takes about 7-8 hours if you use 2120W solar panel, and 3-4 hours if you use 4 80W solar panel.

4. What is the inverter self-consumption?****

– The no load consumption of the pure sine wave inverter is 5-6W, it has auto shut down function, if the AC load is lower than 10W for two hours, the inverter will be turned off automatically.

5. Could I recharge X-1000 by solar charging and AC charging at the same time?****

– Yes, you could use solar charging and AC charging to charge X-1000 simultaneously. Total input is about 560W Max.

TECHNICAL SPECIFICATIONS

Battery capacity	1010VVh(25.9V 39Ah)
Battery type	Li-ion NCM polymer
Cycle Life	>2000 cycles@ 1C to 80% of initial capacity

WARRANTY

Limited Warranty We warrant to the original consumer purchaser that the product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the ‘Warranty Period’ section below, subject to the exclusions set forth below. This warranty statement sets forth our total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products.
Warranty Period
The warranty period is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order establish the start date of the warranty period.
Remedy
We will repair or replace (at our option) any product that fails to operate during the applicable warranty period due to defect in workmanship or material. If a valid claim is made during the applicable period, we will either (1) Replace the product, or (2) Exchange the product with a product that is of equal value. A repair, or replacement product will only be authorized if within the appropriate warranty period and having followed all manufacturer’s operating instructions. We will not be responsible if any of our products have been:
(a) Operated or used outside of manufacturer’s instructions
(b) Been altered or adapted in any way
(c) Been tampered with or had any factory seals broken
Limited to Original Purchaser
Our product warranties are limited to the original purchaser/consumer and may not be passed on to a subsequent owner.
Exclusions
Our warranties do not apply to any product that has been misused, modified, damaged by an accident, flood or water damage, or for any use outside of those recommended in this user manual and/or the manufacturer’s specifications.
Warranty Issues
To request a warranty replacement or repair, contact our customer service team. All information contained here in is subject to change without prior notice.