NITECORE NU06LE Mini Signal Light Instruction Manual

June 4, 2024
Nitecore

NITECORE NU06LE Mini Signal Light

NITECORE-NU06LE-Mini-Signal-Light-PRODUCT-IMAGE

Features

  • Utilizes 4 x high performance LEDs
  • Available with 9 modes including 4 colors of constant-on + flashing and Red/Blue Police Warning Flashing
  • Powered by the built-in 250mAh Li-ion battery with a max runtime of 75 hours
  • Built-in Li-ion battery charging circuit with a USB-C charging port
  • One-hand operable single switch design
  • A built-in power indicator indicates the remaining battery power
  • ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and carry options
  • Made from durable PC materials
  • Ultralight and compact design
  • Impact resistant to 1 meter
Specifications
  • Dimensions: 29.5mm×29.5mm×25.4mm (1.16″× 1.16″× 1″)
  • Weight: 15.8g (0.56oz) (Bracket Not Included)

Accessories
Magnetic Hook-and-loop Bracket, Curved Hook-and-loop Helmet Bracket, MOLLE System Bracket, USB-C Charging Cable

Technical Data

| Output| Runtime| Impact Resistance| IP Rating
---|---|---|---|---
Red Constant-on| 3 Lumens| 9h| 1m| IP66
Red Flashing| 3 Lumens| 75h
Green Constant-on| 8 Lumens| 9h
Green Flashing| 8 Lumens| 75h
Blue Constant-on| 2 Lumens| 5h
Blue Flashing| 2 Lumens| 48h
White Constant-on| 15 Lumens| 5h 45min
White Flashing| 15 Lumens| 54h
Red/Blue Police Warning Flashing| ─| 56h

Note: The stated data is measured using the built-in Li-ion battery (250mAh) under laboratory conditions. The data may vary in real
world use due to different battery usage or environmental conditions.

Bracket Installation

Magnetic
Hook-and-loop Bracket

Curved
Hook-and-loop
Helmet Bracket

MOLLE System Bracket

Charging Function

NITECORE-NU06LE-Mini-Signal-Light-05
The NU06 LE is equipped with an intelligent charging system. Please charge the battery before the first use. Connecting to the External Power: As illustrated, use the USB charging cable to connect an external power supply (e.g. a USB adapter, a computer or other USB charging device) to the USB charging port to begin the charging process. Charging Indication: During the charging process, the power indicator will flash to inform the user. When the battery is fully charged, the power indicator will turn on steadily.

  • The charging time is approx. 1h 45min.
  • The standby time is up to 12 months if the battery has been fully charged.

Operating Instructions On / Off

  • On: When the light is off, long press the Power Button for over 1 second to turn it on.
  • Off: When the light is on, long press the Power Button to turn it off.

Mode Switching
The NU06 LE is available with 9 modes including 4 colors of constantan + flashing and Red/Blue Police Warning Flashing. When the light is off, keep holding the Power Button for over 5 seconds after turning on the light to cycle through the following modes: Red Constant-on ­ Red Flashing ­ Green Constant-on ­ Green Flashing ­ Blue Constant-on ­ Blue Flashing ­ White Constant-on ­ White Flashing ­ Red/Blue Police Warning Flashing. Release to select the desired mode. (The NU06 LE has mode memory. When reactivated, the light will automatically access the previous memorized mode.)

Power Indication
When the light is off, short press the Power Button and the power indicator will flash to indicate the remaining power of the battery:

  1. Flashing three times indicates that the power is above 50%;
  2. Flashing twice indicates that the power is below 50%;
  3. Flashing once indicates that the power is below 10%.

Warnings

  1. Please charge the battery before the first use.
  2. The Magnetic Hook-and-loop Bracket contains strong magnetic components. DO NOT put it close to objects that tend to suffer from magnetic interference.
  3. Please recharge the product every 3 months when left unused for a prolonged time.
  4. The product contains small assembly parts. Please keep it away from children to avoid danger of choking or suffocation.
  5. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/ dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty will be nullified if 1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties; 2. the product(s) is/are damaged due to improper use. For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com All images, texts and statements specified herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Worldwide Warranty Service

  1. Model number————————–
  2. Date of purchase————————–
  3. Serial number————————–
  4. Store Stamp————————–

This is the certificate of authenticity if this item and we confirm that it has been subjected to the most exacting quality controls by SYSMAX Innovations Co., Ltd.

NOTE: Please ensure this warranty card is fully completed by the distributor or retailer after purchasing the product. Should the product fail to operate correctly during the warranty period, it may be returned with the completed warranty card and original sales receipt to the retailer or local distributor for replacement or repair.
Customer Service Email: service@nitecore.com

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou, 510623, Guangdong, China

Made in China

Thanks for purchasing NITECORE! Please find us on facebook : NITECORE Flashlight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals