Skullcandy Sesh True Wireless In Ear Earbuds User Guide

Skullcandy Sesh True Wireless In-Ear Earbuds

INSTALLATION

Auto Pair Mode

• Pairing Mode

Auto Power On

• Power -On

Auto Power- Off

• Power-Off

Charge Earbuds

• Charge Earbuds

Charge Case

• Charge Case

Pairing Mode

• Pairing Mode

Pair New Device

• Pair New Device

Power-On

• Power-On

Power- Off

• Power-Off
• Play/Pause
• Track Forward
• TrackBack
• Volume Up
• Volume Down
• Answer/End
• Activate Voice Assistant

Clear Paired Device

• Reset Device
• Questions Visit:www.skullcandy.com
• Speaker Driver : 6mm, Impedance: 16 Ohms, THD <3%@1KHz, Voltage Regulation: 5V, 500mA, Bluetooth® 5.0, Frequency Band: 2402MHz – 2480MHz, Maximum Power: <4dBm, Weight: 59.5g
• Skullcandy and other marks are registered trademarks of Skullcandy, Inc. All rights reserved.
• Maximum operating temperature 45°C.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:(1)L’appareil ne doit pas produire de brouillage; (2L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.

ISED SAR Compliance Statement

• This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR Ilimit of 1.6 W/kg averaged over one gram of tissue.

• The highest SAR value reported under this standard during product certification for use when properly worn on the body. Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non controlé. L’utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour répondre aux exigencies d’exposition aux ondes radio établie par le développement énergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu’il est correctement porté sur le corps.

• Americas
  

• Canada
  

• Skullcandy, Inc.
  

• 6301 N Landmark DPr
  

• Park City, UT 84098 U.S.A.
  

• Skullcandy.com
  

• Skullcandy Canada ULC
  

• 329 Railway St. Unit 205
  

• Vancouver, BC. V6A 1A4 Canada
  

• Skullcandy.ca

• Contains Li-ion battery. Battery must be recycled or disposed of properly.

• Made in China.

• Hardware Version: V5.1
  

• Software Version: V5.0
  

• R-C-Sku-S2TDW

2 Year Global Warranty

United States of America and Canada Product Purchases Only
Skullcandy products are backed by a 2-year warranty. f it doesn t work the way we promised, we’ll make it rignt. For Guarantee Claims, QuestionS and lerms& Conditions isit www.skulcandy.com/warranty or call us at 1-888-MYSKULL Achats effectués au Canada et aux Etats-Unis uniquement Les produits Skulcandy bénéficient d’une garantie de deux ans. Si le produit ne Tonctionne pas comme I devrait, nous ferons notre possible pour corriger la situation. Pour toute revendication de garantie ou question ou pour connaitre ‘ensemble de nos modalités, veuillez consulter le www.skullcandy.com/warranty
Ou composer le 1 888 MYSKULL.
Product Purchases Outside The United States of America and Canada
N Skullcandy products are backed by a 2-year warranty. If it doesn’t work the way we promised, we’ll | make it right. For Guarantee Claims, Questions, and Terms & Conditions Visit www.skulcandy.com/warranty or email us at [email protected]
Warning: To avoid hearing damage, do not listen at high volume levels. Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in a landfill where hazardous substances will leak out and cause soil and water Contamination-harming wildlife and also human health. To remind you that old electrical equipment can be recycled, t is now marked with a crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin.

FOR WIRELESS PRODUCT

EU/EC DECLARATION OF CONFORMITY
Hereby, Skullcandy Internation GmbH declares that the radio equipment type Model: S21DW is in compliance with Directive 2014/53/EU. The ful text of the EU declaration of conformity is available at the following internet address: Skullcandy.EU/product-documents Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfll where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of lfe, take it to a collection point designated by local authorities or return to purchase location for recycling or disposal.

LIMITED WARRANTY- FOR SALES IN AUSTRALIA

Against defects for 2 year from the date of purchase. Product will be replaced or refunded at our option. At your cost, deliver product and Proof of Purchase to Skullcandy at 63 Centennial Circuit Byron Bay, 2481 NSW, Australia. Ph 02 6639 5555. Further details at www.skullcandy.com.au or contact [email protected]. Your benefits under this Skullcandy warranty are in addition to your other rights and remedies under a law in relation to this product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>