Schneider Electric ATV630 Variable Speed Drive Instruction Manual
- June 4, 2024
- Schneider Electric
Table of Contents
Schneider Electric ATV630 Variable Speed Drive
Introduction and Scope
Legal Information| This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
This product may only be dismantled/disassembled and disposed of by appropriately trained persons and in compliance with all applicable regulations.
---|---
Purpose| This document is intended for use by professional end of life
recyclers or waste treatment facilities. It provides the basic information for
proper end-of-life treatment of product components and materials.
In case of special transportation: transportation method| No special
transportation.
Recyclability potential
|
79%
| Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management:
ADEME).
Safety Information
The information provided in this document assumes that the product is completely de- energized and uninstalled (refer to the instructions provided in the appropriate product manuals).
Dismantling/disassembling the product may entail hazards caused by, for example, sharp edges, chemical aggression or ejected parts.
WARNING
HAZARD DUE TO INSUFFICIENT PROTECTION
- Implement all safety measures required by the applicable regulations and by the processes used to dismantle/disassemble and dispose of the product.
- Use all necessary personal protective equipment such as gloves and goggles.
Failure to follow these instructions can result in death or serious injury.
End of Life Instructions
Recommendation| Number on drawing| Component / Material|
Weight (in g)| Comment
---|---|---|---|---
To be depolluted| 1| Electronic Board (Power and Communication) > 10cm²| 2377|
To be depolluted| 2| LCD and all those back-lighted with gas discharge lamps|
25|
To be depolluted| 3| Other battery| 2,9| Lithium content: 0,07 g
To be depolluted| 4| Cable (high current)| 1951|
To be depolluted| 5| Electrolyte capacitors which size: height > 25 mm,
diameter > 25 mm or proportionately similar volume| 1090|
To be dismantled| 6| Steel| 8530| Lower Housing, Bar, Plate, Support
To be dismantled| 7| Aluminum| 5586| Heatsink, Bar
To be dismantled| 8| PC, ABS-PC, PA, PA6, HDPE, SAN with or without additives
and other polymer| 2405| Upper Housing, Control Housing, Control Chassis,
Cover, Chassis
To be dismantled| 9| Copper| 227| Bar
Other| | | 7306,1|
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
|---|---|
| Brand name | Schneider Electric |
| Product reference | ATV630D45N4 |
| Product function | The main function of the Altivar Process product range |
is the speed control and variation of a synchronous, asynchronous or
reluctance electric motor for fluid management and industrial applications.
Description of the range| This range consists of products
Altivar 630, Altivar 930 and Altivar 955 with ratings from 15 to 22 kW for
operation on 200V/240V and ratings from 30 to 45 kW for operation on 400V/480V
and of products Altivar 340 with ratings from 30 to 37 kW in heavy duty and 37
to 45 kW in normal duty cycle for operation on 400V/480V, 3-phase supplies
IP21/UL type 1. For the Altivar 340 products, the normal duty mode constitutes
the referential mode.
Total representative product mass| 29,5 kg
Representative product dimensions| 673mm x 226mm x 271mm
Accessories| No accessories needed.
Date of information release| 11/2021
Schneider Electric Industries SAS
Country Customer Care Center
http://www.schneider-electric.com/contact 35 rue Joseph Monier
CS 30323
FR 92500 Rueil Malmaison
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVEOLI1411001_V3
Published by Schneider Electric
© 2021 – Schneider Electric – All rights reserved