GIGABYTE 12WE6-A32G60R-10GR EATX Motherboard Instruction Manual
- June 8, 2024
- Gigabyte
Table of Contents
GIGABYTE 12WE6-A32G60R-10GR EATX Motherboard
Desktop Memory
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
Installation Guide
- Please turn off your computer and disconnect the AC power cord.
- Before touching the DRAM module and/or any electronic components on the motherboard, make sure to touch a grounding metal object to discharge any static electricity that might be stored on your body or clothing.
- If all memory slots are used, the memory with lower density shall be removed when installing a new memory.
- Suggest installing memory with identical density & data rate on a single system for better and stable performance.
- Modules should only be inserted/ removed when the clips are in an open position.
- During installation, make sure the memory module is properly aligned to the slot, then fully insert the module all the way into the slot. Proper installation should automatically force the retaining clips to a closed position. Always make sure the memory module is securely installed into the memory slot on your system.
- Turn on the computer.
Memory Module – Warranty Statement
The following limited warranty applies to GIGABYTE memory products. The limited warranty applies to the original end-user customer of the product so long as the original end-user customer owns the product. This limited warranty is non-transferable. GIGABYTE provides replacement or repair services to our customers for defective products within the applicable warranty period. If any, please check https://www.gigabyte.com for more product detail.
Limitation Of Warranty
This limited warranty covers only repairs or replacement of GIGABYTE products. Please note that GIGABYTE is not responsible for providing free repairs if any of the following applies:
- Damage is caused by natural calamities, accidents, vandalism, power problems, or inappropriate usage.
- Damage is caused by accessories, wrapping materials, and refillable goods other than the memory module itself.
- The product has been used with third-party accessories.
- The product has been repaired or disassembled by unauthorized technicians.
- The warranty label and product serial number are altered, damaged, unclear or missing.
- The product serial number does not conform to the number issued by GIGABYTE or the label has been damaged.
- Products were purchased from unauthorized distribution channels.
- Product compatibility problems don’t result from any defect in the GIGABYTE memory module.
Duration of Warranty
Memory modules are covered by a “limited warranty”.* The warranty period starts from the day of purchase. If the product is damaged due to natural causes, free maintenance service is provided during the product’s service life. Proof of the original purchase date is required for this Warranty Service.
The limited warranty varies by country, please visit the GIGABYTE website for more detail warranty information.
Additional Remarks
For certain products, maintenance is done by replacing them with reserved
products; therefore it is possible that after maintenance, the product
returned to the consumer may not be the original one sent in for maintenance.
Due to high product turnover, if the product is no longer under production or
the original manufacturer no longer provides maintenance, GIGABYTE will
replace it with a substitute.
Caution
- Recommended voltage is shown on the DRAM label.
- Always turn off your computer before installing or removing a memory module.
- Only for specific Motherboards and/or CPUs can the product operate at a specified data rate.
- GIGABYTE will not be liable for any damage resulting from the user’s improper over-clocking application or usage.
Product Exchange and Information Required
Send the defective product back to the dealer where it was purchased. During
the procedure, we may need you to specify in detail the product’s model,
serial number, and date of purchase and describe the trouble you came across.
To avoid damage due to poor packing, and/or the shipping damage, use proper
packing material when sending the device for service and repair.
After we receive the product requested for maintenance and confirm that the damage is due to the deficient manufacturing process or poor materials, we will immediately send you a well-functioning product. GIGABYTE only accepts product exchanges if the full package is sent back. A full package means all the material inside the package has to be returned for a valid swap.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
- Product Name: Desktop Memory Module
- Trade Name: GIGABYTE
- Model Number: ARS32G60D5R
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad Street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications. This class B digital apparatus
complies with Canadian ICES-003.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, RoHS
directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been
tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European
Commission Delegated Directive (EU) 2015/863 Statement
GIGABYTE products have not intended to add and be safe from hazardous
substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts
and components have been carefully selected to meet RoHS requirements.
Moreover, we at GIGABYTE are continuing our efforts to develop products that
do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment
(WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU
WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE
Directive specifies the treatment, collection, recycling, and disposal of
electric and electronic devices and their components. Under the Directive,
used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates
that this product must not be disposed of with other waste. Instead, the
device should be taken to the waste collection centers for activation of the
treatment, collection, recycling, and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
End Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates
that this product must not be disposed of with other waste. Instead, the
device should be taken to the waste collection centers for activation of the
treatment, collection, recycling, and disposal procedure.
Contact point for EU-based customers
G.B.T. Technology Trading GmbH
Am Stadtrand 63, 22047 Hamburg, Germany
tel: +49-40-25 33 040.
Administrative Measures for the Restricted Use of Hazardous Substances in Electrical and Electronic Products (China RoHS Declaration)
Hazardous Substances
| (Parts) | (Hazardous Substances) |
|---|---|
| (Pb) | (Hg) |
| PCB Assembly |
×
|
○
|
○
|
○
|
○
|
○
Chip|
○
|
○
|
○
|
○
|
○
|
○
Heat Sink|
○
|
○
|
○
|
○
|
○
|
○
Other plastic components (Design options)|
○
|
○
|
○
|
○
|
○
|
○
These tables are prepared in accordance with the provisions of SJT 11364
○: The content of the such hazardous substance in all homogeneous materials of such component is below the limit required by GB/T 26572.
×: The content of such hazardous substance in a certain homogeneous material of such component is beyond the limit required by GB/T 26572.
BSMI CNS15663
Declaration of the Presence Condition of the Restricted Substances Marking.
Desktop Memory Module: ARS32G60D5R
Equipment name: Type designation (Type)
Unit
| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent
chromium
(Cr+6)
| Polybrominated biphenyls
(PBB)
| Polybrominated
diphenyl ethers
(PBDE)
PCB Assembly| －| ○| ○| ○| ○| ○
Chip| ○| ○| ○| ○| ○| ○
Heat Sink| ○| ○| ○| ○| ○| ○
Other plastic components (Design options)| ○| ○| ○| ○| ○| ○
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicates that the
percentage content of the restricted substance exceeds the reference
percentage value of the present condition.
Note 2: “○” indicates that the percentage content of the restricted
substance does not exceed the percentage of the reference value of presence.
Note 3: The “－” indicates that the restricted substance corresponds to
the exemption.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>