Philips 461004 Wireless Lighting Bulb User Manual
- June 8, 2024
- Philips
Table of Contents
Philips 461004 Wireless Lighting Bulb
To connect your new Hue white bulb, select the installation instruction (A or B) that is applicable to you. For more information on installation and use, please visit www.meethue.com.
If you have a Hue bridge
- Power your Hue white and turn on your wall light switch
- Start the Hue app and follow the instructions
If you have a Hue wireless dimming kit
- Power your Hue white and turn on your wall light switch
- Hold the Hue dimmer switch close to the light, and press and hold the “ON” button for 10 seconds.
- Release the “ON” button after the light has flashed 3 times
NOTICE: Changes or modifications made to this device not expressly approved by Philips Lighting North America Corporation (“Philips) may void the U.S. FCC and Canadian authorization to operate this device.
The advanced interface module complies with FCC radiation exposure limits set
forth for an uncontrolled environment
This device should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 1nterference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the device and the receiver
- Connect the device to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/television technician for help
WARNINGS AND CAUTIONS
- The bulb is suitable for use In open luminaries (fixtures).
- The bulb is not suitable for totally enclosed fixtures.
- The bulb is not intended for use with emergency exit fixtures or emergency lights.
- The bulb is not compatible with photo controls, occupancy sensors, or timing devices unless specifically designed for Hue. The bulb is not suitable for use with legacy
- dimmers.
- Risk of electric shock – Do not use the device where directly exposed to water.
- Before replacing, turn off the power and let the bulb cool to avoid electrical shock or burn.
- Device 1s is for Indoor use only.
- Do not use the device in wet locations, e.g. bathrooms or outdoors.
OPERATING INSTRUCTIONS
- This device is not a toy designed to be played with by children.
- Do not place the device on hot surfaces.
- For safety reasons, do not an open device, which will also void the warranty.
- Use the bulb only in a socket rated for this bulb.
LIMITED WARRANTY
Philips warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average usage per day/7 days per week when used as directed. If this device does not conform to the warranty, Philips will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt, and proof of purchase. Please call our tollfree number 1-800-555-0050, write to Philips (address indicated on the packaging), or send an email to the website www.philips.com to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, misuse, or acts of God.
REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY Y FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above 11mltation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and province to province.
CLEANING AND MAINTENANCE
Do not clean the device when it is on and connected to the power supply. To avoid scratching the device. clean only with a soft dry cloth. Do not use cleaning agents to clean the device. Manage in accordance with disposal laws in your area.” Hue Personal Wireless Lighting” is a trademark owned by Koninklijke Philips N.V.
Wireless Specification
- Wireless RF mode frequency band: 2400~2483.5 MHz
- Wireless communications protocol: IEEE 802.15.4
- Operating channels: channels 11 – 26
Environmental specification
- Temperature (operation): -10 … 4s·c
- Temperature (Storage): -25-60 °C
- Relative humidity: 5-95 % non-condensing
- Standby power: <0.5W per lamp
Please go to www.meethue.com to learn more about Hue and how to use it. FCC ID Hue white A19 lamp: 03M9290002761X This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- his device must accept any interference received, including interference that may cause undesired operation.
IC Certification
- Hue white A19 lamp LED lamp: Company number: 10469A, UPN, 2761X
This Class B digital apparatus complies with Canadian ICES-003 Th1s d1g1tal apparatus and does not exceed the Class B Um1ts for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
Can I use “Z wave” technology with this?****
It’s partially accurate. As long as you import the colors app to control it, it is compatible with Wave hubs. Mine has a Vera (Micas Verde) hub, which I utilize.
Can I use these bulbs to create a pink-and-white color?****
A dazzling chilly white contrasts with a vivid yellow-orange warm tone.
Can I put something in a portal amp that supplies 220 w?****
Just for 120 volts
Is the hue dimmer compatible with this bulb? My package includes a dimmer. I want to replace the warm, standard bulb with a cooler, daylight white.****
Yes. But you should first configure it on the app.
Can these lights be adjusted to emit less blue light to aid with sleep?****
It’s not exactly blue light, but you can adjust the color warmth because they have a range of light from cool to warm. If you wish to lean more toward red light, a Color Ambiance bulb would be a better option.
Does it function with the Harmony Hub or do I also need the Phillips Hub?****
The Hue Hub is necessary.
Does the Echo Plus hub work?****
In a rudimentary sense (on/off/dim, temperature/color), it does operate with Echo Plus. The Hue hub is required if you want intelligent interaction (sync with sunset, IFTTT, etc.).
Can I place this bulb in a closed space without it heating up?****
Yes
Can I use the Hue app to control my lights if I don’t have a Hue bridge?
Yes, you can use the Hue app to control your lights without a Hue bridge. The app will control your lights as long as they are connected to the same wireless network as your phone or tablet.
Can I use the Hue app to control my lights if I don’t have a Hue dimmer switch?
Yes, you can use the Hue app to control your lights without a Hue dimmer switch. The app will control your lights as long as they are connected to the same wireless network as your phone or tablet.
Can I connect more than one light bulb to my bridge?
Yes, you can add up to 50 light bulbs to a single bridge.
Can I connect more than one bridge to my home network?
Yes, you can connect up to four bridges to one home network.
How do I reset my bridge?
To reset your bridge, unplug it from the power outlet and plug it back in after 30 seconds. If this doesn’t work, try resetting your bridge by pressing and holding both buttons on the back of the bridge for 10 seconds. If this doesn’t work, please visit www.meethue.com/support for more information on how to contact Philips support.
How do I reset my light bulb?
To reset your light bulb, remove it from its socket and press and hold both buttons on the back of the light bulb for 10 seconds. If this doesn’t work, please visit www.meethue.com/support for more information on how to contact Philips support for assistance with a specific issue that you’re experiencing with your light bulb or other Hue products.
My light bulb is not responding correctly when I try to pair it with my bridge or with my mobile device (iPad®, iPhone®, etc.). What should I do?
Please make sure that you are following all of the pairing instructions in this user manual carefully and completely before contacting Philips support for assistance with pairing issues or other issues that you’re experiencing with your light bulb or other Hue products. Also make sure that you are using an up-to-date version of the Hue app on your mobile device (iPad®, iPhone®, etc.). If these steps do not resolve your issue, please visit www.meethue.com/support for more information on how to contact Philips support for assistance with pairing issues or other issues that you’re experiencing with your light bulb or other Hue products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>