XLIFE Q3 Smart Visual Ear-Clean Rod User Manual
- June 8, 2024
- XLIFE
Table of Contents
Suitable for all family
Q3 Smart Visual Ear-Clean Rod
-
Download the APP
iOS: Search “Xlife”in App Store
Android: Search “Xlife”in Google Play OR scan the QR code to download the apphttp://bebird.cn/xlife/app -
Open APP Click Q3
-
Press and hold the power button to turn on the ear cleaning rod
Connect Product Wi-Fi
- Connect Product Wi-Fi “xlife-Q3-XXXXXX”
- Back to Xlife app start to use it
Accessory replacement
For a better user experience, we recommend replacing the ear tip at least
every 3 months.
(This can be adjusted according to the frequency of use.)
Troubleshooting
| Problem | Solution |
|---|---|
| No response after startup | Please use the incidental charging cable to charge. |
The charging time
is 45mins
The app exits quickly| Delete the existing app and scan QR to reinstall it
Feel tricky with replacing ear tips| Align the replacement ear tip to camera
and tighten clockwise
Indicator light flashes| Please use the incidental charging cable to charge.
The charging time
is 45mins
Abnormal display in app| Interrupt the connection, restart the product to
connect again
If you still have problems with the above procedures, please contact our Customer Service Representatives directly for further assistance
Hazardous substance
| Part name | Hazardous material |
|---|---|
| (Pb) | (Hg) |
| Printed Circuit Components | x |
| Case | |
| Plastic rubber accessory |
This form is formulated in accordance with SJ/T 11364
：represent the hazardous materrial ratio is below GB/T26572-2011
×：represent the hazardous materrial ratio is over GB/T26572-2011
Product parameters
| Brand | Xlife |
|---|---|
| Product Name | Smart Visual Ear-Clean Rod |
| Model | Q3 |
| Pixels | 3 Mega-pixels |
| Lens diameter | 3.5mm |
| Image transmission rate | 20fps |
| Battery | 130mAh |
| Battery life | 45 minutes |
| Charging time | 45 minutes |
| Input current | 5V 0.5A |
| Gyroscope | 3-axis |
| Network standard | 25g |
| Working temperature | IEEE 802.11b/g/n |
| Rod weight | -10- 45℃ |
| Image sensor | CMOS |
Attention
-
When cleaning lens, please wipe it carefully with professional alcohol cotton swabs.
-
Please observe your surroundings before use. Stay at least 2ft away from people, animals, or moving objects when using.
Don’ t use in a moving vehicle or other unstable environments.
Please don’ t move around when using. -
This product is unsuitable for children under 3 years old.
-
This product is not suitable for children to use alone.
-
Do not place in a humid environment for a long time or soak in liquids.
-
There is a built-in rechargeable lithium-ion battery. Even if you do not use it, you should charge it once a month to avoid long-term battery damage.
-
Please use a 5V charger to charge the device. Do not use this product while being charged.
-
Avoid direct exposure to the sun.
-
Do not put heavy objects on the product.
-
It is normal for the temperature to rise slightly when using (up to 95℉).
Warranty
User info
User name:……………..Telephone number:………….
Address:……………
Seller:………Telephone number:……………
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>