JASCO Roku TV Replacement Remote User Manual
- June 8, 2024
- JASCO
Table of Contents
Roku® TV Replacement Remote
User Manual
Roku TV Replacement Remote
See reverse for easy-to-follow instructions and exclusive deals.
Setup
Preprogrammed for immediate use with Roku-enabled TVs. Simply insert two (2)
AA batteries (not included) and you’re ready to enjoy your favorite shows.
Alkaline batteries are recommended for this remote.
An Insignia or Sharp Roku-enabled TV may require programming. Additionally, if you wish to program the remote to operate a Roku streaming player rather than a Roku TV, please see the Programming Instructions section for details.
Battery Installation
- Press arrow on back of remote and slide cover downward to remove.
- Insert the batteries, making sure to match the (+) (-) polarity inside the compartment.
- Replace cover and slide it upward until it clicks into place.
NOTE: If your remote is not operating properly, replace the batteries
with new ones.
Battery Precautions
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MO, etc.) batteries.
- Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.
Battery Saver
Your remote automatically turns off if the buttons are held down for more than
8 seconds. This saves battery life if your remote gets stuck in a place where
the buttons remain depressed (e.g., between sofa cushions).
Code Saver
You have up to 10 minutes to change the batteries in your remote without
losing the codes you have programmed.
Troubleshooting
Remote does not operate your device
- Make sure the batteries are fresh and installed correctly.
- Aim the remote directly at your devi. and make sure there are no obstructions between the remote and the device.
- Remote may not be compatible with your device.
Reset to Factory Settings
- Press and hold the SETUP button until the red light stays on.
- Press the REWIND button 4 times. The red light will blink twice.
Button Functions
- Power -Turns device ON/OFF
- Setup – Used to program the remote
- Up/down/left/right menu navigation
- OK – Selects menu items
- Back – Returns to previous menu/screen
- Home – Returns to the home semen to access streaming features
- Options (*) – Displays additional options
- Rewind, play/pause, fast forward
- Volume up/down
- Channel up/down
- Mute – Mutes sound
- App -Accesses top apps like Netflix, Amazon Prime, Hutu and more
- Instant replay – Repeats previous few seconds, then resumes play
This product and its sellers are not affiliated with Roku®. There is no endorsement or sponsorship by non-affiliated brands provided or implied. AI brand names and products listed/shown are trademarks of their respective owners.
Programming Instructions
Insignia and Sharp Roku TVs: Some Insignia and Sharp models may need
additional programming. Use the included Code List and follow the steps below.
Roku Streaming Players: This remote can operate either a Roku TV or a
Roku streaming player. It does not work with Roku streaming sticks.
Programming is required for use with compatible Roku streaming players. Use
the included Code List and follow the steps below.
- In the Code List (included with remote), circle the 4-digit codes for the type and brand of device you wish to control.
- Press and hold down the SETUP button until the remote’s red light turns on.
- Use the number buttons indicated in the diagram above to enter the first 4-digit code circled in Step 1. The red light will then turn off.
- Point the remote at the device and test the buttons. If they don’t work as expected, repeat Steps 2-4 with the next circled code.
Programming notes
- Some codes may operate only a few device functions, so test other codes for more functionality.
- Keep your device codes for future reference.
FCC Statement
Suppliers Declaration of Conformity I Model #: 66814 I Jasco Products Co., 10
E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Thank you for your purchase!
Instructions made easy
Read instructions or watch easy-to-fol low video.
https://byjasco.com/66814i
Scan code or visit byjasco.com/66814i
Register your product
Receive exclusive deals and register your product.
https://byjasco.com/register-your-product
Scan code or visit byjasco.com/deals
For additional CE products, visit our website.
www.byjasco.com
Like our product?
Leave a review on your favorite retailer website or
amazon.com.
Having Problems?
Let us know how we can help.
Call 1-800-654-8483 between 7AM-8PM,
M-F, Central Time.
ICES-3(B)/NMB-3(B).
66814 v1 1/22
MADE IN CHINA
GE is a trademark of General Electric Company and is under license by Jasco
Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime warranty. Visit
www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>