Sunco DL-SG6-2750K 6 Inch Eyeball Gimbal Selectable Downlight User Manual

Sunco DL-SG6-2750K 6 Inch Eyeball Gimbal Selectable Downlight

Product Usage Instructions

Safety Information: To reduce the risk of fire, electric shock, or physical injury, please follow these safety precautions.

• This device complies with Part 15 of the FCC rules.
• Operation is subject to specific conditions to prevent interference.
• Review all instructions carefully before installation.
• Turn off the circuit breaker before installation.

FAQ

• If the light isn’t turning on:
• Double-check if the fixture is properly connected and ensure the circuit breaker hasn’t been tripped.
• If the light unexpectedly fails or is not dimming to the lowest setting:
• Please refer to the troubleshooting section in the manual or contact our support team for assistance.

Whats in the Box?

Slim Downlight

Get Your Gear

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off the circuit breaker before installing this fixture.
• This product should be installed by a person familiar with the construction and operation of the product the hazards involved. Safety eyeglasses and gloves are recommended.
• Abide by related regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Do not alter, relocate, or remove wiring during installation.
• Do not make or alter any open holes in the wiring enclosure or electrical components during installation.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixtures away from corrosive substances.
• Suitable for damp locations at temperatures ranging from 4°F to 113°F. Not for use where directly exposed to water.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• This product is not compatible with photo controls.
• This product is not compatible with occupancy sensors.
• This product is not compatible with timing devices.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully before installation.

WARNING
Cancer & Reproductive Harm- www.P65Warnings.ca.gov

Quickstart Guide

Step 1

• Use a template to cut the hole.

Step 2

• Connect supply & junction wires.

Step 3

• Attach fixture to junction box.

Step 4

• Insert fixture into ceiling.

Installation Guide

STEP 1

• Turn off the circuit breaker before installation.
• Cut out 6.33” housing size on the Installation Template, then tape it onto the ceiling in the desired location.
• Cut the ceiling hole using the Installation Template as a guide.

STEP 2

• Open the junction box and remove the appropriate knockout.

STEP 3

• Thread cable connector through knockout, secure wires with screws, attach cable connector nut on the opposite side, & connect supply & junction wires with wire nuts.
  • Black to Black (Live); White to White (Neutral)
• Tuck connected wires inside the junction box and close the cover.

STEP 4

• Note: This step applies exclusively to the Selectable Slims.
• Slide the CCT Switch to choose from 5 colour temperatures.
• Insert the junction box through the ceiling hole.
• New Construction: Secure to studs, joists, or similar fixed structural units.
• Remodel: Do not require to secure studs, joists, or similar fixed units.

STEP 5

• Attach the fixture to the junction box using the connector as shown in image (1).
• Tighten the connector by hand (2).

STEP 6

• Adjust the flexible optic position to aim the light beam where needed. The gimbal rotates 360° and tilts 35°.
• Raise spring clips to insert the luminaire in the ceiling opening. Turn on the circuit breaker & test the light.

Product Details

Recommended Dimmers

Specifications

Common Troubleshooting

• Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
• If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day.

Light Distribution Angle

• Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles:
• A symmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting.
• An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
• It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy

• This product is covered by our industry leading 7 year warranty.
• It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy

• At Sunco we value our customers and stand by the quality and performance of our products.
• If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service

• Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:
• Email: support@sunco.com
• Call or Text: 844-334-9938

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>